• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.202-207
• /
• 2002

This paper deals with a novel shunted actuator, which has a capability to suppress multi-mode vibration amplitudes by using a pair of piezoceramic patches. In order to describe the characteristic behaviors of shunted dampers connected with a series and a parallel resistor-negative capacitive branch circuit, the stiffness ratio and loss factor with respect to the non-dimensional frequency are considered. To obtain a guideline model of a piezo/beam system connected with a series and a parallel resistor-negative capacitor branch circuit, the governing equations of motion is derived through Hamiltons principle and a piezo sensor equation as well as a shunt damping matrix is developed. The theoretical analysis shows that the shunted actuator developed in this study can significantly reduce multiple-mode vibration amplitudes simultaneously over the whole structural frequency range.

• Transactions on Electrical and Electronic Materials
• /
• 제7권4호
• /
• pp.196-203
• /
• 2006

An air-gap type FBAR was designed using Leach equivalent model for analyzing a vertical structure of the FBAR. For the top electrode, Pt, and the bottom electrode, Au, of $1.2{\mu}m$ thickness and the piezoelectric of 0.8,urn thickness, the resonance and anti-resonance occurred at 2.401 GHz and 2.460 GHz, respectively. $S_{11}$ was increased and $S_{21}$ was decreased as the resonance area of FBAR was widened. We observed the characteristics of insertion loss, bandwidth and out-of-band rejection of ladder-type FBAR BPF by changing resonance areas of series and shunt resonators and by adding stages. As the resonance area of series resonator was increased, insertion loss was improved but out-of-band rejection was degraded. And as the resonance area of shunt resonator was increased, insertion loss was degraded a little but out-of-band rejection was improved even without adding stages. We, also, changed the shape of the resonance area from square shape to rectangle shape to examine the effects of the resonator shape on the characteristics of the BPF. The best performances were observed when the sizes of series and shunt resonator are $150{\mu}m{\times}l50{\mu}m\;and\;5{\mu}m{\times}50{\mu}m$, respectively. Out-of-band rejection was improved about 10dB and bandwidth was broadened from 30MHz to 100MHz utilizing inductor tuning on $2{\times}2\;and\; 4{\times}2$ ladder-type BPFs.

• 한국전자파학회논문지
• /
• 제15권3호
• /
• pp.284-290
• /
• 2004

본 논문에서는 기판상의 인덕터가 박막공진 여파기의 성능에 미치는 영향을 고찰하기 위하여 두 종류의 사다리형 박막공진 여파기를 설계 및 제작하였다. 여파기를 이루고 있는 박막공진기들의 압전물질은 AIN이고, 전극은 백금(Pt)으로 이루어졌으며 기판에 의한 오버모드(overmode) 현상을 제거하기 위하여 air-gap 형태로 제작되었다. 듀플렉서를 이루고 있는 송신용 여파기의 특성을 보이기 위해 4개의 직렬 공진기와 2개의 병렬 공진기로 이루어진 사다리형 4/2단 여파기가 제작되었으며, 수신용 여파기의 성능을 보이기 위해서는 3/4단으로 제작되었다. 여파기의 성능을 개선하기 위해 사용된 기판상의 인덕터들은 2 ㎓ 대역에서 약 5∼9 정도의 Q값 특성을 보였으며, 인덕터가 연결된 여파기는 연결되지 않은 경우에 비해 약 10∼12 ㏈ 정도의 개선된 대역외 저지특성을 보였다.