• Earthquakes and Structures
• /
• 제17권3호
• /
• pp.317-327
• /
• 2019

High-speed railway bridge piers in seismically active area may be subjected to multiple earthquakes and then produce cumulative residual deformation. To study the cumulative residual deformation of high-speed railway bridge piers under multiple earthquakes, a nonlinear numerical analytical model with multi-DOF (MDOF) system is presented and validated against two shaking table tests in this paper. Based on the presented model, a simple supported beam bridge pier model of high-speed railway is established and used to investigate the cumulative residual deformation of high-speed railway bridge pier under mainshock-aftershock sequences and swarm type seismic sequences. The results show that the cumulative residual deformation of the bridge pier increases with earthquake number, and the increasing rates are different under different earthquake number. The residual deformation of bridge pier subjected to multiple earthquakes is accumulated and may exceed the limit of code.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.99-104
• /
• 2006

There are several advantages to make use of a bridge pier for the tidal power generation. Current velocity increases near the pier, therefore the tidal power generation becomes more efficient because the power is proportional to the cubic of the current velocity. The pier is convenient for access and maintenance of the hydraulic turbine and the power unit. The project is now underway at the Ikitsuki Bridge in Tatsuno-Seto Strait of Nasasaki Prefecture, where the tidal current was measured by the bottom mount ADCP for almost one year. Model experiments for a Darrieus water turbine with two and three straight blades were carried out in the circulating water channel, in which the power coefficients of the turbine were obtained as a function of blade section and the attaching angle of a blade to the rotor. Those experimental results are discussed to obtain an optimum Darrieus turbine for tidal power generation.

• Steel and Composite Structures
• /
• 제21권3호
• /
• pp.661-677
• /
• 2016

The quasi static test of the steel reinforced concrete (SRC) bridge piers and rigid frame arch bridge structure with SRC piers was conducted in the laboratory, and the seismic performance of SRC piers was compared with that of reinforced concrete (RC) bridge piers. In the test, the failure process, the failure mechanism, hysteretic curves, skeleton curves, ductility coefficient, stiffness degradation curves and the energy dissipation curves were analyzed. According to the $M-{\Phi}$ relationship of fiber section, the three-wire type theoretical skeleton curve of the lateral force and the pier top displacement was proposed, and the theoretical skeleton curves are well consistent with the experimental curves. Based on the theoretical model, the effects of the concrete strength, axial compression ratio, slenderness ratio, reinforcement ratio, and the stiffness ratio of arch to pier on the skeleton curve were analyzed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.81-82
• /
• 2010

교각 급속 시공 기술 개발의 일환으로 피어캡의 프리캐스트화를 위한 설계 및 시공상의 문제점을 분석하였다. 제안된 공법 중 특히 프리캐스트 쉘 형식을 사용하는 방안에 대하여 구조성능을 평가하고 기존 RC 구조와 비교하는 실험 연구를 수행하였다.

• Earthquakes and Structures
• /
• 제10권6호
• /
• pp.1467-1486
• /
• 2016

This research focuses on seismic performance of a class of single pier skewed bridges with three different pier-deck connections; skew angles vary from $0^{\circ}$ to $60^{\circ}$. A well-documented four span continuous deck bridge has been modeled and verified. Seat-type connections with fixed and sliding bearings plus monolithic pier-deck connections are studied. Shear keys are considered either fully operational or ineffective. Seismic performances of the bridges and the structural components are investigated conducting bidirectional nonlinear time history analysis in OpenSees. Several global and intermediate engineering demand parameters (EDP) have been studied. On the basis of results, the values of demand parameters of skewed bridges, such as displacement and rotation of the deck plus plastic deformation and torsional demand of the piers, increase as the skew angle increases. In order to eliminate the deck collapse probability, the threshold skew angle is considered as $30^{\circ}$ in seat-type bridges. For bridges with skew angles greater than $30^{\circ}$, monolithic pier-deck connections should be applied. The functionality of shear keys is critical in preventing large displacements in the bearings. Pinned piers experience considerable ductility demand at the bottom.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.615-620
• /
• 2001

The aim of this paper is to open up a relatively new type in bridge engineering by introducing plan and design of extradosed bridge which is implemented in Sungnam-Janghowon T/K project. The topic encompasses parametric study including the behavior of the bridge relevant to the cable layout, the distance from pier table to the first cable's location, the height of pylon, the stiffness of cross section and wind vibration to ascertain sectional type of bridge and span length. For the purpose of the knowledge base presented here, the important feature of design is recommended such as modeling method, camber control, finite element analysis and heat hydration of pier table. We can verify the issue related to the characteristics of extradosed bridge as a result of study and design endeavor.

• Structural Engineering and Mechanics
• /
• 제77권3호
• /
• pp.343-354
• /
• 2021

The frequencies formulas of the bridge are of great importance in the design process since these formulas provide insight dynamic characteristics of the structure, which guides the designers to parametric analyses and the layout of the bridge in conceptual or preliminary design. Continuous rigid frame bridge is popular in the mountainous area. Mostly, this type of bridge was simplified either as a girder or cantilever when calculating the frequency, however, studies showed that the different configuration of the bridge made the problem more complex, and there is no unified fundamental calculation pattern for this kind of bridge. In this study, an empirical frequency equation is proposed as a function of pier's height, stiffness of pier and the weight of the structure. A unified fundamental frequency formula is presented based on the energy principle, then the typical continuous rigid frame bridge is investigated by finite element method (FEM) to study the dynamic characteristics of the structure, and then several key parameters are investigated on the effect of structural frequency. These parameters include the number, position and stiffness of the tie beam. Nonlinear regression analyses are conducted with a comprehensive statistical study from plenty of engineering structures. Finally, the proposed frequency equation is validated by field test results. The results show that the fundamental frequency of the continuous rigid frame bridge increases more than 15% when the tie beams are set, and it increases with the stiffness ratio of tie beam to pier. The results also show that the presented unified fundamental frequency has an error of 4.6% compared with the measured results. The investigation can predicate the approximate longitudinal fundamental frequency of continuous ridged frame bridge, which can provide reference for the seismic response and dynamic impact factor design of the pier.

• 한국수자원학회논문집
• /
• 제32권1호
• /
• pp.49-59
• /
• 1999

우리 나라의 세굴현황을 파악하고 교량설계에 대한 기초자료를 제공하기 위하여 중부지방의 중·소하천에 위치한 교량에 대하여 실시한 세굴조사 자료를 분석하였다. 현장실측은 주로 세굴에 영향을 미치는 물리량들, 즉 수심, 유속, 교각폭, 및 길이, 세굴깊이, 접근각 등을 중심으로 이루어졌다. 지역적으로는 경기도 용인·광주지역, 홍천강의 서면지역, 청평·포천지역, 연천지역, 청주북일지역으로 구분하였으며 교각도 타원과 원형으로 구분하였다. 이들로부터 세굴깊이와 수심, 접근각 도는 Fuoude수 등주요 인자들과의 관계를 도출하였으며 또한 기존의 제안된 세굴공식에 이들을 적용시켜 세굴깊이를 산정하였다. 또한 실측된 세굴깊이와 비교하여 우리 나라에 적용가능한 세굴공식을 제안하였다.

• 한국산학기술학회논문지
• /
• 제16권7호
• /
• pp.4936-4941
• /
• 2015

본 연구(I)는 교량 설치에 따른 발생되는 교각 형상별 수리학적 특성을 분석하였다. 교각의 형상은 사각형, 마름모형, 팔각형, 타원형, 원형 및 교각 설치전을 포함하여 총 6가지로 구분하였으며, 1차원 모형(HEC-RAS)와 2차원 모형( RMA-2)을 적용하여 수리특성을 분석하였다. 분석결과 사각형과 마름모형의 유속 벡터가 상류방향 흐름을 보임으로 교각주위의 침식 및 유사이송으로 하상변동에 큰 영향을 미칠 것으로 판단된다. 또한, 타원형의 유속이 설치전의 유속과 가장 유사하게 산정되어 흐름의 방해가 거의 없다고 판단된다. 이러한 분석은 향후 신설 교각형상 선택시 도움을 주리라 판단된다.

• 한국해안·해양공학회논문집
• /
• 제23권6호
• /
• pp.422-428
• /
• 2011

잔교식 안벽의 생애주기비용(Life Cycle Cost, LCC)을 이용하여 신뢰도지수의 최적값을 구하였다. 응답면 기법을 이용한 신뢰성해석을 통해 횡잔교와 돌제식 잔교의 파괴확률을 산정하였다. 파괴확률은 잔교의 파괴 시 복구비용을 산출하는데 활용하였으며 초기공사비와 유지관리비를 모두 고려한 LCC를 최소화시킬 수 있는 신뢰도지수를 찾았다. 지진하중과 접안하중에 대한 다양한 조건에서의 최적 신뢰도지수를 구하였고 이를 통해 신뢰성설계에 사용할 수 있는 목표신뢰도지수를 제안하였다.