• Journal of the Korean Data and Information Science Society
• /
• v.21 no.4
• /
• pp.777-782
• /
• 2010

We introduce some techniques to decompose the impulse (the unit sample) into several dilated pieces in the discrete time domain. From the decomposition of the impulse, we obtain localized moving averages. Thus we construct hybrid Bollinger bands that may give various strategies for stock traders. By simulations, we report that more than 94% of stock prices of companies in KOSPI 200 are inside this hybrid Bollinger band.

• Journal of Power Electronics
• /
• v.10 no.3
• /
• pp.300-305
• /
• 2010

This paper presents a two Hall sensor method for rotor angle detection in permanent magnet synchronous motors (PMSM). To minimize the implementation complexity, the system is designed to measure the edge field of permanent magnet pieces. However, there are nonlinearities in the measured values of the edge field. In this work, an angle correction algorithm is proposed, and the improvements in accuracy are verified through experiments. Finally, a field orientation controller is constructed with the proposed angle detection algorithm.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.332-335
• /
• 2001

The surface roughness is one of the important parameters to evaluate the quality of products. Its level must be limited to a certain range in the precision components. This paper deals with grinding characteristics of workpieces by the wear amount of wheels in the surface grinding process. The surface roughness was measured according to the feedrate and the depth of cut with respect to the various workpieces. In addition, the wear amount of wheels according to the number of grinding pieces was obtained.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.905-909
• /
• 1997

A geometric error of machine parts is one of the most important factors that affect the accuracy of positioning, generating and measuring for precision machinery. It is known that the thermal deformation of a workpiece during surface grinding is the most important in the geometric error of ground surface. This paper experimentally describes the grinding characteristics of creep-feed grinding. The wheels have 6 slotted pieces in order to compare the grinding temperature with the geometric.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.04a
• /
• pp.101-105
• /
• 2000

In cold forging die the shrink fitting is generally used to decrease stress and increase die life. In this paper we have studied about the effect of fitting type, When the die insert is splitted into several pieces the maximum stress could be decreased as much as 50~70% The fitting angle could be selected to minimize the maximum stress and the variation of stress on loading and unloading, . In F, E.M result in case 3。 fitting angle the maximum and variation of stress may be minimized.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.737-742
• /
• 1997

In this paper the effect of tie wire in lap spliced bars is investigated by experiment. The variables considered in the beam behaviors are beam dimension, lapped splice length and numbers of tie wire. 3 test pieces having the same variables consist one series and a total of 6 series ar tested. The test results show the beam behavior is not affected by numbers of tie wire but by the manner of tie. It was revealed hat the load bearing capacity of the beam is increased when the tie wire is extended to top bar.

• Bulletin of the Korean Mathematical Society
• /
• v.57 no.1
• /
• pp.1-30
• /
• 2020

In this paper, we classify all twisted torus knots which are middle/hyper doubly Seifert. By the definition of middle/hyper doubly Seifert knots, these knots admit Dehn surgery yielding either Seifert-fibered spaces or graph manifolds at a surface slope. We show that middle/hyper doubly Seifert twisted torus knots admit the latter, that is, non-Seifert-fibered graph manifolds whose decomposing pieces consist of two Seifert-fibered spaces over the disk with two exceptional fibers.

• Proceedings of the Korean Society for Language and Information Conference
• /
• 2007.11a
• /
• pp.76-85
• /
• 2007

This paper addresses a task of opinion extraction from given documents and its positive/negative classification. We propose a sentence classification method using a notion of syntactic piece. Syntactic piece is a minimum unit of structure, and is used as an alternative processing unit of n-gram and whole tree structure. We compute its semantic orientation, and classify opinion sentences into positive or negative. We have conducted an experiment on more than 5000 opinion sentences of multiple domains, and have proven that our approach attains high performance at 91% precision.

• Journal of the Korea Furniture Society
• /
• v.12 no.2
• /
• pp.11-18
• /
• 2001

Steaming has been used for bending wood for a long time, but the steam-bent wood is subject to spring-back and a relatively large radius of curvature. Liquid ammonia is known as an excellent wood plasticizer swelling both crystal and amorphous cellulose. Liquid ammonia technique for wood plasticization was developed and applied for bending alder and padauk pieces, which were used as parts of wooden furniture. The study confirmed that liquid ammonia bent wood can be used for various wood working design.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.168-170
• /
• 1994

Carbide-tipped twist drill of new type which is better than traditional H.S.S twist drill has been developed successfully to drill steel work-pieces with high speed. This new carbide drill consists of a characteristic flature of special shape of cutting edge, chip pocket, and flute. The special design of the chip pocket and the flute guarantees both periodic fracture and smooth transport of chips along the flute. The carbide-tipped twist drill also allows one to apply more drilling force than conventional one and produce holes with high accuracy.