• 대한기계학회논문집
• /
• 제16권9호
• /
• pp.1669-1680
• /
• 1992

본 연구에서는 볼 엔드밀 가공에서 공구계의 처짐을 고려한 절삭력과 처짐을 예측하고, 처짐의 예측으로 가공 정밀도를 향상시키는 이송 속도와 헬릭스 각의 선정 에 대해서 고찰한다.

• 소성∙가공
• /
• 제15권1호
• /
• pp.57-64
• /
• 2006

High speed milling experiment on the hardened mold steel (CALMAX at hardness of HRC 55) is carried out using small diameter ball endmills. Tool lift and wear characteristics under the various machining parameters are investigated Effect of dynamic runout on the wear of the tool is also studied. For most of the cases, catastrophic chipping of tool edge is not observed and uniformly distributed wear on the flank surface of the tool is obtained. It is found that lower rate of tool wear is obtained as the cutting speed is increased. Also, high pick feed rate is found to be more favorable in terms of the tool wear and material removal rate.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.525-528
• /
• 2003

The aspherical lens are used as objective lens of optical pickup. The sample product is made before manufacturing the injection mould of lens to examine the design factor. The optimum cutting conditions of the main spindle speed, the depth of cut, the feed rate are found when we cut PMMA and PC lens sample with ultra-precision SPDT. The demanded surface roughness 10 nm Ra. aspherical form error 0.5 ${\mu}{\textrm}{m}$ P-V for aspherical lens of optical data storage device are satisfied for PMMA. but not satisfied for PC.

• 한국기계가공학회지
• /
• 제19권3호
• /
• pp.71-76
• /
• 2020

Various machining methods are being studied to improve the processing quality of the spherical R shape in press die. In this paper, we confirmed that changes in machining quality were associated with changes in cutting direction, path, and cutting angle, which are commonly used in the machining of molds. We obtained a surface roughness graph with each condition change in one specimen using an instrument that measured geometry and surface roughness simultaneously. The results of the study showed that the best surface roughness in the finish cut of the spherical surface was obtained using upward pick feed machining.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 제6회 학술대회 논문집 일렉트렛트 및 응용기술연구회
• /
• pp.47-51
• /
• 2004

The aspherical lens are used as objective lens of optical pickup. The sample product is made before manufacturing the injection mould of lens to examine the design factor. The optimum cutting conditions of the main spindle speed, the depth of cut, the feed rate are found when we cut PMMA and PC lens sample with ultra-precision SPDT. The demanded surface roughness 10 nm Ra, aspherical form error 0.5 ${\mu}m$ P-V for aspherical lens of optical data storage device are satisfied for PMMA, but not satisfied for PC.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 금형가공,미세가공,플라스틱가공 공동 심포지엄
• /
• pp.114-120
• /
• 2005

High speed milling experiment on the hardened mold steel (CALMAX at hardness of HRc 55) is carried out using small diameter ball endmill. Tool lift and wear characteristics under the various machining parameters are investigated. Effect of dynamic runout on the wear of the tool is also studied. For most of the cases, catastrophic chipping of tool edge is not observed and uniformly distributed wear on the flank surface of the tool is obtained. It is found that lower rate of tool wear is obtained as the cutting speed is increased. Also, high pick feed rate is found to be more favorable in terms of tool wear and material removal rate.

• 한국정밀공학회지
• /
• 제19권3호
• /
• pp.101-106
• /
• 2002

This paper presents an experimental investigation of high speed machining of dies and molds. Several critical issues involved with the high speed machining of QRO90 tool steel of hardness up to HRc62, have been studied and explained from a detail analysis of experimental observations. The experiments were performed using ball end mills. The effect of different process parameters on tool life and surface finish produced was also investigated. The cutting parameters involved were; cutting speeds in the range of 100 to 40 / m/min, axial depth of cut from 0.1 to 0.5mm, pick feed of 0.1 to 0.5mm. Run out and acceleration signals were observed during the experiment to investigate cutting slates. Compressed air and flood coolant were used and the effect of coolant on tool life was also determined.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.276-279
• /
• 1997

A simple bio-feedback system was developed to monitor and to analyze patient's postural balance. Two load celIs were used to measure the weight of each side. A specially designed electronic circuit was made to pick up the weight signals and to feed into the data acquisition system. Clinical trials were also made on 20-30 year-old normal subjects and nine hemiplegia patients who had the potential instability in weight bearing. A Microsoft window-based software collected and analyzed the postural balance data. Normal subjects showed only 5% deviations of their body weight. However, hemipegic patients had significant weight shifts toward the healthy limb. With the present system, patients can also exercise their balance and weight bearing. The present system should be of convenience to monitor in real-time and analyze the postural balance control of hemiplegic patients.

• 한국생산제조학회지
• /
• 제25권2호
• /
• pp.118-123
• /
• 2016

Overlap cutting is a fundamental method of applying abrasive water jet (AWJ) machining to milling to produce a wider surface because the nozzle outlet is approximately 1.0 mm wide. In this study, the effects of overlap cutting on the depth profile and surface roughness are investigated. The overlapping area depends on the amount of step over, which is controlled in the pick-feed direction. If the step over is equal to or larger than the diameter of the nozzle, no overlap cut occurs but large cusps remain between the cut paths. A step over as small as one-thirds of the nozzle diameter may lead to triple-overlap cutting resulting in an extraordinary depth. By using pocket milling experiments with a step over of 0.46 (or 0.47), it is verified that AWJ can produce a milled surface of titanium, one of the hard-to-cut materials, with $76{\mu}m$ Ra.

• 한국멀티미디어학회논문지
• /
• 제11권4호
• /
• pp.516-524
• /
• 2008

본 논문은 기존에 연구되지 않았던 옷의 독특한 특징들을 묵시적 제한방법을 사용하여 강력한 제한력으로 구현하는 새로운 모델링 방법을 제안한다. 기존의 명시적 제한방법인 Baumgarte 안정화 방법은 해에 빠르게 수렴하도록 하기 위해 사용자가 시뮬레이션에 따라서 값이 달라지는 안정화 변수 값을 선택해야 하고, 시뮬레이션의 시간 간격 사용에 있어서 안정화에 한계가 있는 단점들이 있다. 본 논문은 큰 시간 간격에도 안정적이고, 안정화 변수 값을 요구하지 않고, 물리적으로도 적합한 물체의 움직임을 보장하는 묵시적 제한방법을 사용한다. 또한 묵시적 제한 방법의 계산 복잡도는 Baumgarte 안정화 방법과 같다. 본 논문은 묵시적 제한방법의 수식과 제한의 오차 분석을 설명하였고 옷의 솔기, 단추, 옷 주름, 옷의 구김, 과잉 늘어짐 방지 등의 복잡한 옷의 요소들에 대한 모델링 방법을 제시하였다. 본 논문에서 제안된 방법은 외부 상황에 의해 각종 제한들이 자동적으로 설정되고 제거되어 계산 비용을 절약함과 동시에 옷의 독특한 특징들의 구현을 통해 현실감 있는 옷 시뮬레이션의 결과들을 얻었다.