• Nuclear Engineering and Technology
• /
• v.51 no.4
• /
• pp.1163-1168
• /
• 2019

Hydrodynamic properties have been investigated for promising extraction systems: $0.05mol\;L^{-1}$ solutions of di(N-ethyl-4-ethylanilide) of 2,2'-bipyridine-6,6'-dicarboxylic acid, di(N-ethyl-4-fluoroanilide) of 2,6-pyridinedicarboxylic acid and di(N-ethyl-4-hexylanilide) of 2,2'-bipyridine-6,6'-dicarboxylic acid in meta-nitrobenzotrifluoride (F-3) or trifluoromethylphenyl sulfone (FS-13) diluents. To evaluate the perspectives for their use as extraction mixtures at the final stage of the nuclear fuel cycle, the change in density, viscosity, surface tension, and phase separation rate under irradiation with accelerated electrons was studied. The concentrations of extractants in the irradiated mixtures have been determined and the radiation-chemical yields have been calculated. Irradiation significantly decreases the phase separation rate at the stages of extraction and back extraction for all the studied systems. The viscosity of the DYP-7 solution in FS-13 increase above the values suitable for its use in extraction processes.

• Applied Biological Chemistry
• /
• v.40 no.1
• /
• pp.48-52
• /
• 1997

Modified starches were used as additives to make tomato ketchup, and their effects on the rheological properties, serum separation and sensory characteristics of the tomato ketchup were examined. The magnitudes of the yield stress and the consistency index of the tomato ketchup with the additives, regarded as a Herschel-Bulkley fluid, were found to be in the order of ADA(acetylated distarch adipate)>SA(starch acetate) >HDP(hydroxypropyl distarch phosphate)>RCS(raw corn starch)>NS(no starch). The flow behavior indices of SA added ketchup and HDP added one were nearly constant regardless of the additive concentrations, whereas those of ADA and RCS increased with the additive concentration. In the serum separation test centrifugation, the ADA added ketchup showed the highest stability against separation, being fol-lowed by SA>HDP>RCS>NS. In the sensory evaluation, the magnitudes of the acceptance of the ketchup with the additives were as ADA(2%)>SA(2%)>RCS(2%)>NS>HDP(2%).

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.10a
• /
• pp.86-87
• /
• 1996

IPN (Interpenetrating Polymer Network) is a mixture of two or more crosslinked polymers with physically interlocked network structures between the component polymers. IPN can be classified as an alloy of thermosets and has the characteristics of thermosets such as the thermal resistance and chemical resistance and also has the characteristics of polymer alloys with enhanced impact resistance and amphoteric properties. The physical interlocking during the synthesis restricts the phase separation of the component polymer with chemical pinning process, thus the control of morphology is possible through variations of the reaction temperature and pressure, catalyst concentration and crosslinking agent concentration. Finely dispersed domain structure can be obtained through IPN synthesis of polymer components with gross immiscibility. In membrane applications, particularly for the separation of liquid mixtures, crosslinked polymer component with specific affinity to the permeate is needed. With the presence of the permeant-inert polymer component, the mechanical strength and the selectivity of the membranes are enhanced by restricting the swelling of the transporting polymer component networks.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.648-653
• /
• 2003

Optimized recovery of heavy minerals from the near shore sands of Korean Yellow Sea was investigated using physical processing technologies such as gravity concentration and magnetic separation. The head samples were subjected to the three stages effective separation; Head sample was first treated by a spiral separator to recover rough heavy mineral concentrates, which are contained minerals like ilmenite, zircon and rare earth minerals. Much higher beneficiation processes were subsequently taken by wilfley table and magnetic separation according to their magnetic field responses. Heavy minerals were effectively recovered by wilfley table and subsequent recleaning of heavy minerals by magnetic separations was conducted. Qualitative and relative-quantitative analyses of their constituent elements were doing using XRD and XRF.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.728-736
• /
• 1996

Solid/Liquid(S/L) separation is crucial for biological treatment of animal wastewater. Liquid portion from S/L separation has less BOD-load and proper post-strip treatment can be obtained . Screen or declined sieve was normally used to separate the solid parts. For better separating efficiency a vibration and a cylindrical separator were constructed and tested. The results are summarized as follows : Solids removal efficiency and moisture content of separated solid were 15-26% and 85-88%, respectively for the vibration separator. For the cylindrical separator, solid removal efficiency and moisture content of solid were 16-39% and 86-89% , respectively. The greatest amount of drymatter was obtained when operating vibration separator with 10。 inclination and 100% vibrating power. For the cylindrical separator maximum efficiency was obtained with 40rpm and 19 inclination . The vibration and the cylindrical separator have shown 21% and 26% in BOD removal, respectively. These two types of separator were proved to be applicable methods for animal wastewater separation.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.3
• /
• pp.34-43
• /
• 2021

Wake turbulence generated by the lead aircraft has a significant impact on the following aircraft and it is has been considered a key factor to consider whenin determining the longitudinal separation between the aircraft. ICAO classifies aircraft into four wake turbulence categories based on the maximum takeoff weight and provides the longitudinal separation minima for each category. Due to richer measured data and better understanding of physical processes, it is raised that classifying aircraft with only four wake turbulence grades is imprecise and leads to over-separation in many instances. In this regards, much research on a new method of classifying Wake Turbulence Category(Re-CAT) has been done by EURO-CONTROL, FAA, and ICAO. The main purpose of this study is to conduct a comparative analysis of the existing wake turbulence separation standards with Re-CAT in terms of departure capacity and the resulting benefits of Re-CAT using the data from the Incheon International Airport. The results show that EUROCONTROL and new ICAO standards have the greater effect on reducing wake turbulence separation, compared to the FAA RE-CAT standards. It is also concluded that Re-CAT presents different results of wake turbulence separation depending on the flight characteristics of each airport.

• The Journal of Korean Physical Therapy
• /
• v.21 no.3
• /
• pp.1-8
• /
• 2009

Purpose: The purpose of this study was to examine the functional category, the item structure and the model-data fit of the neck disability index (NDI) of neck pain subjects by performing a Rasch rating scale analysis. Methods: The data was obtained from the assessments of 71 college students (males: 27, females: 44) with neck pain. The data of the NDI was applied to the Rasch's rating scale model to estimate the difficulty of items, the goodness-of-fit of each item, the separation reliability and index, and the rating scale. Results: The 'sleep' item showed misfit and nine items were founds to be fits for self-reporting of disability due to neck pain. The most difficult item of the remaining 9 items was 'work' and the easiest item was 'headache'. The transformation formula score=(logit score+7.10)/(7.10+0.11)$\times$100. The 6 response levels of the NDI were validated according to the structure of the rating scale. The item and subject reliability of the separation reliability was 0.97 and 0.85, respectively. Conclusion: We proved that the NDI for self-reporting of disability of daily activities due to mild neck pain was valid and reliable. This study suggests that individuals with mild neck pain may be assessed by using the modified NDI that does not include the 'sleep' item in the 10 items of NDI.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.281-281
• /
• 1996

The immunoassay method is frequently used for the identification and quantitation of ultratrace amount of bioactive substances. Homogeneous liposome immunoassays, which can avoid the use of radioisotopes and separation steps, have recently been reported in many publications. Cytolysin-mediated liposome immunoassay using melittin ever been studied but showed limited applications. Here, we designed a homogeneous liposome immunoassay using Clostridium perfringens phospholipase C (PLC), an enzyme which catalyzes the hydrolysis of phosphatidylcholine in biological membranes, as a cytolysin.

• Clean Technology
• /
• v.18 no.4
• /
• pp.341-346
• /
• 2012

Many researchers have studied that many processes to effectively remove heavy metals in water/wastewater. Especially, among many processes, physical and chemical processes are relatively simple and obtain high treatment efficiency for removal heavy metals compared with biological treatment. Recently, interests in physical and chemical methods are sharply increasing again because of dangerousness for radioactive element. In this study, various physical and chemical processes such as chemical precipitation, ion-exchange, electrodialysis, and membrane separation are introduced.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.218-219
• /
• 2008

A gas-liquid centrifugal separator is widely used in industry because of its simple geometry and little maintenance. Also, these separators have considerable advantages over filters, scrubbers or precipitators in term of compact design, low pressure drop and higher capacity. A gas-liquid centrifugal separator is a device that utilizes centrifugal force and low pressure to separate liquid from gas by density difference. Design parameters such as length of separation space, swirl vane exit angle, inlet to outlet pipe diameter ratio, models for separation efficiency and low pressure drop as a function of physical dimension are not available in literature. In present study, length of separation space (from vane to gas exit opening) has been studied using CFD. The 3-D Navier-Stokes equations are numerically solved using a fully implicit finite volume scheme. Based upon the obtained solutions, tangential velocities, centrifugal forces, vortices and total pressure losses are analyzed to find the best design parameters.