• Research in Plant Disease
• /
• v.21 no.1
• /
• pp.40-43
• /
• 2015

Bacterial pustule of soybean is caused by Xanthomonas axonopodis pv. glycines, one of the most important diseases in soybean. The symptom of bacterial pustule is mainly distributed around leaf veins. However, the reason has not been known. In order to determine pathosystem of bacterial pustule in leaf, soybean leaves were collected and observed using scanning electron microscopy (SEM) and light microscopy. Many hairs were observed at abaxial sides of the leaf, few hairs were observed at tissue around the leaf veins. In addition, unidentified bacterial cells and dusts at the no hair part near veins were observed. In the inoculation assays, the cells of X. axonopodis pv. glycines were observed near leaf veins. The imprint of underside of soybean leaves inoculated with X.axonopodis pv. glycines on PDA showed that the growth of bacteria around veins was observed but no bacterial growth at the part with leaf hairs. Our data demonstrated that soybean leaf hairs play an important role as a physical barrier for structural resistance of soybean against bacterial pustule pathogen.

• Journal of Korean Society of Rural Planning
• /
• v.21 no.1
• /
• pp.117-127
• /
• 2015

This study evaluated properties and items for selecting on a forest healing village. In order to assign a weight value-between factors, this study was conducted the primary survey first and then the secondary survey for measuring the importance of items. Experts'surveys were conducted on 3 items on level 1, 9 items on level 2, 35 items on level 3 with use of AHP technique. In level 1, the main analysis result was that physical resource properties(0.387) indicated the highest importance. in level 2, healing resources of physical properties(0.402), community participation of human resource properties(0.425), and business competency in part of vision(-.438) showed the highest importance. The analysis result of 35 items on level 3 was that in physical resources properties, securing public land in the village(0.220), possessing recreation space(0.440) and resources available for link with healing(0.413) showed the highest importance. In part of human resources properties, the average age of residents(0.465), commitment to the promotion of the villagers(0.367) and support of local leaders(0.318) showed the highest importance. Adequacy of development plan(0.274), forest work experience-related(0.293), and building profit sharing system(0.282) were also evaluated to have a relatively high importance.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.18-30
• /
• 2010

As the automobile industry is developing, the number of deaths and injuries has increased. To reduce the damages from automobile accidents, the government of each country proposes experimental conditions for reproducing the accident and establishes the vehicle safety regulations. Automotive manufacturers are trying to make safer vehicles by satisfying the requirements. The Hybrid III crash test dummy is a standard Anthropomorphic Test Device (ATD) used for measuring the occupant's injuries in a frontal impact test. Since a real crash test using a vehicle is fairly expensive, a computer simulation using the Finite Element Method (F.E.M.) is widely used. Therefore, a detailed and robust F.E. dummy model is needed to acquire more accurate occupant injury data and behavior during the crash test. To achieve this goal, a detailed F.E. model of the Hybrid III 5th percentile female dummy is constructed by using the reverse engineering technique in this research. A modeling process is proposed to construct the F.E. model. The proposed modeling process starts from disassembling the physical dummy. Computer Aided Design (CAD) geometry data is constructed by three-dimensional (3-D) scanning of the disassembled physical dummy model. Based on the geometry data, finite elements of each part are generated. After mesh generation, each part is assembled with other parts using the joints and rigid connection elements. The developed F.E. model of dummy is simulated based on the FMVSS 572 validation regulations. The results of simulation are compared with the results of physical tests.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.4
• /
• pp.115-119
• /
• 2006

To investigate the effects of independent suspension technology(IST) of hiking boot on the stability and load of foot, eight participants performed medial and lateral drop landing from 33.4cm height and 85cm distance to uneven surface while wearing normal & IST hiking boots. For the stability of foot during the drop landing, the balance angle & suspension angle and rearfoot angle was analyzed using high-speed video analysis. Also kinetic analysis using the force plate and insole pressure measurement was conducted to analyze vertical & breaking ground reaction force and pressure distribution. Not only the balance angle & suspension angle but also rearfoot angle was improved with IST boots for lateral drop landing. These results indicate the IST boots may have the suspension function which keeps the foot to be stable during landing. However the IST boots did not show any effect for medial landing. This might be related to the hardness of medial part of outsole. Therefore the softer outsole of medial part could be recommended. Furthermore the impact force & breaking force and insole pressure were reduced with IST boot. These results means that IST boot has not only cushioning effect but also good grip effect. Therefore the hiking boots applied the independent suspension function may help to reduce fatigue and prevent injury such as ankle sprain in hiking on uneven surface.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.3
• /
• pp.247-256
• /
• 2022

Purpose : The purpose of this study was to investigate the effects of Kaltenborn-Evjenth (KE) joint mobilization of the distal radioulnar joints (RUJ) and proximal RUJ in distal radius fractures (DRFs) on range of motion (ROM), grip strength (GS), and patient-written wrist evaluation (PRWE) in each group once, thrice, or fivefold. Methods : Forty-two subjects participated in this study. We divided the subjects with DRFs into groups applying KE concepts RUJ mobilization once, thrice, and fivefold. The patients' ROM and GS were measured using a joint goniometer and dynamometer, respectively. Pain and function were also assessed using a PRWE. In the statistical analysis, all data were tested for normality using the Shapiro-Wilk test, and paired t-tests were performed for within-group before-and-after comparisons of each intervention. One-way analysis of variance was used for between-group comparisons of differences. All statistical significance levels were set at α=.05. Results : There were significant differences in the ROM in all three groups before and after the intervention (p<.05), but there were no significant differences between the groups. There were significant differences in the GS in the three groups before and after the intervention (p<.05), but there were no significant differences between the groups. In the pain part of the PRWE, all three groups had significant differences before and after intervention (p<.05), but there was no significant difference between the groups. In the functional part of the PRWE, there were significant differences in the three groups before and after intervention (p<.05), but no significant difference occurred between the groups. Conclusion : Based on the aforementioned results, there were no significant between-group differences in ROM, GS, and PRWE (pain and function) after the application of the K-E joint mobilization to DRFs once, thrice, and fivefold. Nevertheless, there were significant within-group differences in all the above.

• Geomechanics and Engineering
• /
• v.31 no.1
• /
• pp.15-30
• /
• 2022

Slope stability during the excavation of twin road tunnels is considered crucial in terms of safety. In this research, physical model testing and numerical analysis were used to investigate the characteristics of the settlement (uz) and vertical stresses (σz) along the two tunnel sections. First, two model tests for a (fill-rock) slope were conducted to study the settlement and stresses in presence and absence of slope support (plate support system). The law and value of the result were then validated by using a numerical model (FEM) based on the physical model. In addition, a finite element model with a slope supported by piles (equivalent to the plate) was used for comparison purposes. In the physical model, several rows of plates have been added to demonstrate the capacity of these plates to sustain the slope by comparing excavating twin tunnels in supported and unsupported slope, the results show that this support was effective in the upper part of the slope, while in the middle and lower part the support was limited. Additionally, the plates appear to induce less settlement in several areas of the slope with differing settlement and stress distribution as compared to piles. Furthermore, as a results of the previous mentioned investigation, there are many factors influence the stress and settlement distribution, such as the slope's cover depth, movement during excavation, buried structures such as the tunnel lining, plates or piles, and the interaction between all of these components.

• Physical Therapy Rehabilitation Science
• /
• v.6 no.4
• /
• pp.208-213
• /
• 2017

Objective: Despite reliable evidence of abnormal scapular motions increases, there is not yet sufficient evidence of abnormal humeral translations. This study aims to analyze the motion of the humeral head toward the scapula when the shoulder is actively abducted using the C-arm. Design: A case report. Methods: The participant was a healthy man without any limitation and pain during shoulder movement. The participant's shoulder was abducted; this movement in the frontal plane was measured using a C-arm (anterior-posterior view) and was analyzed with computer-aided design. The starting posture was $15^{\circ}$, and as the participant abducted his shoulder measurements were taken and analyzed at $30^{\circ}$, $60^{\circ}$, $90^{\circ}$, $120^{\circ}$, $150^{\circ}$, and ending at $165^{\circ}$. A line was drawn perpendicularly to the line connecting the humeral head axis to the glenoid, and another line was drawn perpendiculary to the line connecting the scapular axis to the glenoid. The distance between the two lines measured is defined as the e value. Results: At the starting posture ($15^{\circ}$), the central axis of the humeral head was located 1.92 mm inferior to the central axis of the scapula. The humeral head was superiorly translated from the starting posture to $120^{\circ}$, and then, showed an inferior translation to the ending posture ($165^{\circ}$). Conclusions: The results of this study showed that the humeral head moved upward from the starting posture ($15^{\circ}$) up to $120^{\circ}$ indicating, superior translation, and it moved downward when the posture was past $120^{\circ}$, indicating inferior translation.

• Journal of Korean Clinical Health Science
• /
• v.4 no.1
• /
• pp.542-549
• /
• 2016

Purpose. The purpose of this study was to determine the effect of massage program on muscle strength (MMT), range of motion (ROM) and activities of daily living (ADL) in children with spastic cerebral palsy. Methods. The child welfare center of J city were measurement goniometer by range of motion and evaluation of activities of daily living scale and muscle strength scale. The massage program was applicated with 40 min, 2 times per a week and total 8 weeks. Massage program constituted surface of effleurage, petrisage, deep part of effleurage, friction in regular sequence. Result. For muscle strengths were significantly differenced after 8 weeks. For range of motion were dose dependent increased different two groups. And activities of daily living scale were significantly difference between massage group and non-massage group. Conclusion. In this study, the therapeutic massage program showed a positive effect for muscle strength, range of motion and activities of daily living in spastic cerebral palsy.

• Journal of Digital Convergence
• /
• v.11 no.6
• /
• pp.205-212
• /
• 2013

The purpose of this study was to analyze the factors of health services that satisfy chronic musculoskeletal patients in the northern part of Gyeong-buk, South Korea. One hundred and seven chronic musculoskeletal patients who had visited a clinic in Gyeong-buk were recruited for this study. The data were collected through a questionnaire survey administered from May 7 to June 6, 2012. The collected data were analyzed by multiple regression analysis. The major findings of this research are as follows. The chronic musculoskeletal patients' satisfaction was determined by the "physical therapist's explanation," "registration process," "home exercise," "respect from staff," and whether the physical therapist and staff "listened to concerns." The chronic musculoskeletal patients' likely to revisit is strongly related to "physical therapist's explanation," "registration process," and "up-to-date equipment." Therefore, it is very important for clinics to improve the quality of the "physical therapist's explanation," "registration process," "respect from staff," "informed consent," "up-to-date equipment," and "home exercise." Furthermore, it is expected that the outcomes of this study will contribute to the customer satisfaction of chronic musculoskeletal patients in clinics.

• Asian Journal of Turfgrass Science
• /
• v.19 no.2
• /
• pp.95-102
• /
• 2005

USGA green specification is currently accepted in construction method of Korea. This study was carried out to find the factors influencing growth of turfgrass associated with soil physical properties of soil root-zone on golf green constructed with USGA method. Three putting greens in poor turfgrass and one in good turfgrass condition were selected for investigation on one golf course site at mid-South Korean peninsula. Soil hardness, moisture content, root length, and turf density were measured on-site greens, and soil physical properties and soil chemical properties also analyzed in laboratory. As a result of on-site surveys and soil physical tests in laboratory, soil physical properties were most important factors which influenced on turfgrass growth at tested greens. The results of soil particle analysis on green No. 2, in good turf condition, matched USGA sand particle recommendations. But those greens such as Nos. 1, 11 and 16, in poor putting greens, showed high soil compaction and improper soil particle distribution. Those factors created low leaf density, poor root depth, and higher moisture content compared with lower part of topsoil. Such phenomena caused inadequate turfgrass growth with soil hardening associated with poor drainage. Therefore, declines of soil physical properties associated with improper particle distribution caused a major factor influencing on turfgrass growth in golf green. Adequate test of soil particle analysis by USGA specification and proper construction method followed by adequate turf maintenance should be performed to obtain optimal turf quality on putting green.