• 보존과학연구
• /
• s.32
• /
• pp.5-24
• /
• 2011

Neunghwaji(Embossed patterned paper) is a unique paper used for a traditional book cover in Korea. The research was carried out to investigate Neunghwaji's features. Physical property was studied through a test of tensile strength and folding endurance. Also, comparative analysis of virus resistance and waterproof ability was undertaken on Neunghwaji. 1. Folding endurance test showed that strength of non-embossed CB and HB decreased during deteriorating duration. Embossed CN and HN showed the strength increasing at early stage and decreasing from the 27th day of the deteriorating duration. Tensile strength was decreasing in both cases as deterioration progressed. 2. Growth of Arthrinium sp. fungus on embossed paper was 10% less than plain paper while Cladosporium sp. showed 20~30% less growth. Amur cork dyeing(H) showed 10~30% lower fungi growth than Gardenia seed dyeing(C). The result indicated that embossed paper has better virus resistance than Hanji, and Amur cork dyeing has better virus resistance than Gardenia seed dyeing. 3. Average contact angle of CN, CB, HN, and HB was $85{\sim}92^{\circ}$ and NON-N and NON-B was $59{\sim}63^{\circ}$. In detail, CN's contact angle was $1{\sim}7^{\circ}$ higher than CB's; HN was $1{\sim}6^{\circ}$ higher than HB. Therefore, it was found that embossed paper has higher contact angle than Hanji thus the former has better waterproof ability. The research suggested production technique of Neunghwaji and studied its features related to the technique. Neunghwaji was confirmed to have superior quality to Hanji though further study regarding above test result is needed to complement the research.

• Journal of the Korean Applied Science and Technology
• /
• v.41 no.3
• /
• pp.813-824
• /
• 2024

This study was conducted to evaluate the long-term effects of training on the physical development and exercise performance of adolescent weightlifters, aiming to provide effective training and management strategies for improving competitive performance. In order to achieve the objectives of the study, adolescent weightlifters from middle and high schools in Chungcheongnam-do province [male middle school-aged athletes, n=5; female middle school-aged athletes, n=5; male high school-aged athletes, n=12; female high school-aged athletes, n=8] were examined over approximately 10 months of weightlifting-based training to analyse the changes in body composition, physical fitness (muscular strength, muscular endurance, agility, flexibility, dynamic balance, coordination), and isokinetic muscular function (trunk and lower extremity). As a result, it was found that the physical development of middle and high school-aged athletes underwent physical development primarily characterized by an increase in lean body mass. Additionally, back muscle strength and power, which contribute to rapid and efficient force transmission between the upper and lower body, as well as grip strength necessary for controlling the barbell with a stable grip, are significant factors. These aspects were notably enhanced through specialized training and competitive experience for weightlifting performance at the high school level. On the other hand, changes in factors beyond the primary physical attributes contributing to weightlifting performance were limited, suggesting differences in effectiveness likely stemming from the specific composition of training programs or the athletes' experience and skill levels. Collectively, the findings from this study, which evaluates the physical characteristics and exercise abilities of adolescent weightlifters, are expected to contribute to improved competitive performance of weightlifters.

• Korean Journal of Adult Nursing
• /
• v.25 no.5
• /
• pp.483-493
• /
• 2013

Purpose: The purpose of this study was to examine late-onset hypogonadism, erectile dysfunction, depression, and quality of life among middle-aged male workers. Methods: The subjects included 343 men aged between 40 and 64, responded to self-report questionnaires on general characteristics, late-onset hypogonadism, erectile dysfunction, depression, and quality of life. Data were collected from May 16, 2012 to October 9, 2012 and analyzed using t-test, ANOVA, $x^2$-test, hierarchical multiple regression. Result: The prevalence rate of late-onset hypogonadism was 63.8% with high points in reduction of libido, energy, physical strength and endurance, and erectile function. There were significant differences in late-onset hypogonadism according to age($x^2$=8.98, p=.048) and in erectile dysfunction according to age(F=11.03, p<.001), monthly income(F=2.84, p=.024) and smoking( t=2.96, p=.018). Significant differences were also found in depression according to educational level(F=8.12, p<.001) and in quality of life according to monthly income(F=7.21, p<.001). The factors which influenced quality of life were late-onset hypogonadism, erectile dysfunction, depression, marital status and religion. Conclusion: Symptoms of erectile dysfunction can be improved by smoking cessation education program. In order to improve the life quality of middle-aged men, nursing intervention programs that would both provide proper knowledge on climacteric syndrome and alleviate symptoms should be designed while, at the same time, other programs to evaluate, prevent and control depression are developed.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.4
• /
• pp.449-457
• /
• 2012

The program/erase (P/E) cyclic endurances including bias temperature instability (BTI) behaviors of Metal-$Al_2O_3$-Nitride-Oxide-Semiconductor (MANOS) memories are investigated in comparison with those of Semiconductor-Oxide-Nitride-Oxide-Semiconductor (SONOS) memories. In terms of BTI behaviors, the SONOS power-law exponent n is ~0.3 independent of the P/E cycle and the temperature in the case of programmed cell, and 0.36~0.66 sensitive to the temperature in case of erased cell. Physical mechanisms are observed with thermally activated $h^*$ diffusion-induced Si/$SiO_2$ interface trap ($N_{IT}$) curing and Poole-Frenkel emission of holes trapped in border trap in the bottom oxide ($N_{OT}$). In terms of the BTI behavior in MANOS memory cells, the power-law exponent is n=0.4~0.9 in the programmed cell and n=0.65~1.2 in the erased cell, which means that the power law is strong function of the number of P/E cycles, not of the temperature. Related mechanism is can be explained by the competition between the cycle-induced degradation of P/E efficiency and the temperature-controlled $h^*$ diffusion followed by $N_{IT}$ passivation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.257-257
• /
• 2016

최근에 메모리의 초고속화, 고집적화 및 초절전화가 요구되면서 resistive random access memory (ReRAM), ferroelectric RAM (FeRAM), phase change RAM (PRAM)등과 같은 차세대 메모리 기술이 활발히 연구되고 있다. 다양한 메모리 중에서 특히 resistive random access memory (ReRAM)는 빠른 동작 속도, 낮은 동작 전압, 대용량화와 비휘발성 등의 장점을 가진다. ReRAM 소자는 절연막의 저항 스위칭(resistance switching) 현상을 이용하여 동작하기 때문에 SiOx, AlOx, TaOx, ZrOx, NiOx, TiOx, 그리고 HfOx 등과 같은 금속 산화물에 대한 연구들이 활발하게 이루어지고 있다. 이와 같이 다양한 산화물 중에서 AlOx는 ReRAM의 절연막으로 적용되었을 때, 우수한 저항변화특성과 안정성을 가진다. 하지만, AlOx 박막을 형성하기 위하여 기존에 많이 사용되어지던 PVD (physical vapour deposition) 또는 CVD (chemical vapour deposition) 방법에서는 두께가 균일하고 막질이 우수한 박막을 얻을 수 있지만 고가의 진공장비 사용 및 대면적 공정이 곤란하다는 문제점이 있다. 한편, 용액 공정 방법은 공정과정이 간단하여 경제적이고 대면적화가 가능하며 저온에서 공정이 이루어지는 장점으로 많은 관심을 받고 있다. 본 연구에서는 sputtering 방법과 용액 공정 방법으로 형성한 AlOx 기반의 ReRAM에서 메모리 특성을 비교 및 평가하였다. 먼저, p-type Si 기판 위에 습식산화를 통하여 SiO2 300 nm를 성장시킨 후, electron beam evaporation으로 하부 전극을 형성하기 위하여 Ti와 Pt를 각각 10 nm와 100 nm의 두께로 증착하였다. 이후, 제작된 AlOx 용액을 spin coating 방법으로 1000 rpm 10 초, 6000 rpm 30 초의 조건으로 증착하였다. Solvent 및 불순물 제거를 위하여 $180^{\circ}C$의 온도에서 10 분 동안 열처리를 진행하였고, 상부 전극을 형성하기 위해 shadow mask를 이용하여 각각 50 nm, 100 nm 두께의 Ti와 Al을 electron beam evaporation 방법으로 증착하였다. 측정 결과, 용액 공정 방법으로 형성한 AlOx 기반의 ReRAM에서는 기존의 sputtering 방법으로 제작된 ReRAM에 비해서 저항 분포가 균일하지는 않았지만, 103 cycle 이상의 우수한 endurance 특성을 나타냈다. 또한, 1 V 내외로 동작 전압이 낮았으며 104 초 동안의 retention 측정에서도 메모리 특성이 일정하게 유지되었다. 결론적으로, 간단한 용액 공정 방법은 ReRAM 소자 제작에 많이 이용될 것으로 기대된다.

• Advanced Composite Materials
• /
• v.18 no.4
• /
• pp.315-326
• /
• 2009

PCC (precipitated calcium carbonate) and ground calcium carbonate have been widely used in alkaline papermaking. Unfortunately, although increasing filler level in papers can improve the paper properties such as brightness, opacity, stiffness gloss, smoothness, porosity, and printability, as well as decrease cost, some strength of the paper is negatively affected. In this research, needle-like aragonite was synthesized using $Ca(OH)_2$ and $CO_2$ as reactants in the presence of $MgCl_2$ and characterized with scanning electronic microscopy (SEM) and X-ray diffraction (XRD). The physical and optical properties of the paper handsheets containing these needle-like aragonite fillers were evaluated. Results indicated that tensile strength, Z-direction tensile strength and folding endurance of the paper were improved by the needle-like aragonite crystals compared to the paper using commercial PCC (precipitated calcium carbonate) as filler. The stiffness of the paper handsheet on the machine direction was increased, but no evident difference in the cross direction was found. The improvement of paper strength mainly resulted from the twining effect between the aragonite whiskers and paper fibers. The optical properties of the paper were slightly decreased with the use of the needle-like aragonites compared to commercial PCC. These results suggest that paper cost can be decreased by increasing the content of needle-like aragonite filler while paper strength will not be decreased compared to PCC filler.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.20.1-20.1
• /
• 2011

The nano-sized quantum structure has been an attractive candidate for investigations of the fundamental physical properties and potential applications of next-generation electronic devices. Metal nano-particles form deep quantum wells between control and tunnel oxides due to a difference in work functions. The charge storage capacity of nanoparticles has led to their use in the development of nano-floating gate memory (NFGM) devices. When compared with conventional floating gate memory devices, NFGM devices offer a number of advantages that have attracted a great deal of attention: a greater inherent scalability, better endurance, a faster write/erase speed, and more processes that are compatible with conventional silicon processes. To improve the performance of NFGM, metal nanocrystals such as Au, Ag, Ni Pt, and W have been proposed due to superior density, a strong coupling with the conduction channel, a wide range of work function selectivity, and a small energy perturbation. In the present study, bismuth metal nanocrystals were self-assembled within high-k $Bi_2Mg_{2/3}Nb_{4/3}O_7$ (BMN) films grown at room temperature in Ar ambient via radio-frequency magnetron sputtering. The work function of the bismuth metal nanocrystals (4.34 eV) was important for nanocrystal-based nonvolatile memory (NVM) applications. If transparent NFGM devices can be integrated with transparent solar cells, non-volatile memory fields will open a new platform for flexible electron devices.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.2
• /
• pp.286-291
• /
• 1997

The purpose of this study is to examine the effect of clothing habits wearing cool or warm in daily life on motor ability. A group of ten healthy young females were divided into a cold (C) group and a warm (W) group. From autumn to winter, C group was advised to wear cool clothing, and W group, warm Clothing. The subject's physical fitness were tested in October, initial stage of the clothing training and March of the following year, final stage of the training. The measurements were taken after the subjects rested in a thermoneutral room conditioned at 23$\pm$2$^{\circ}C$ over 1 hour. The test items were weight, skinfold thickness, grip strength (right, left), back-lift strength, vertical jump, sit-ups, Irosmax, side step test, single-foot standing test with eyes closed, and standing trunk flexion. Changes in motor ability of each group between initial stage and final stage of the training were compared. 1. Muscle strength, part of the motor revelation capacity, showed no significant change in the both ,Troops. On the other hand, strength and power showed a decrease in the both groups and C group showed a sharp decrease. 2. Muscular endurance and cardio-pulmonary fitness, part of the motor continuation capacity, were increased after the training and the degree of increase was great in C group. 3. C group showed significant increase in motor coordination capacity including agility, balance, and flexibility after the training, while Wgroup showed significant increases only in balance. 4. Weight and skinfold thickness as a part of the physique showed no significant change.

• Journal of the Korea Furniture Society
• /
• v.19 no.6
• /
• pp.475-486
• /
• 2008

In this study, fire-retardant chemicals were melt with mixed composition ratios of dibasic ammonium phosphate and each half of boric acid and borax in hot water, in which hammer-milled chips were immersed to increase swelling of waste particleboards. Also, fire-retardant treated particles from sawn lumber chip and recycled particleboard chip were composed in ratio of 70:30 in core layer to improve boards' properties. Retention ratio of fire-retardant chemicals for the particles for face layer was high due to high specific surface area, and that of sawn lumber chips was somewhat higher than that of recycled particleboard chips. The mixture of particles from sawn lumber chips and recycled PB of 70:30 in weight ratio exceeded bending strength of 100 $kgf/cm^2$. It seemed that the relatively greater portions of dibasic ammonium phosphate affected adversely to dimensional stability, however fire-retardants treatment resulted in distinct effect lowering formaldehyde emission such as $E_0$ type(0.5mg/$\ell$ or less) in KS F 3104. In fire-retardancy, the recycled boards with a mixed ratio of dibasic ammonium phosphate to boric acid borax(50:50 mixture) of 70% to 30% in weight satisfied fire-retardancy 3rd grade in KS F 2271, and also this composition from cone calorimeter test met same standard grade figuring total heat release of 4.6MJ/$m^2$.

• PNF and Movement
• /
• v.15 no.3
• /
• pp.333-341
• /
• 2017

Purpose: This study was to explore the effects of trunk exercise using PNF combined with treadmill training on balance and walking ability in patients with Parkinson's disease. Methods: This study included 16 patients with Parkinson's disease. Participants were randomly assigned to 2 groups: an experimental group (n=8) and a control group (n=8). All participants underwent treadmill training for 30 minutes. In addition, the experimental group (trunk exercise using PNF) and control group (conventional training) participated in a 30-minute exercise program. Both groups performed the training 5 times per week for 4 weeks. Disease severity (determined using the unified Parkinson's disease rating scale motor subscale, UPDRS-3), balance (determined using the Berg balance scale, BBS), walking speed (determined using the 10-meter walking test, 10MWT), and walking endurance (determined using the 6-minute walking test, 6MWT) were measured at baseline and after 4 weeks. Results: Pre- to post-intervention improvement was noted on all outcome measures for both groups (p<0.05). Post-intervention, there was a significant improvement in the experimental group as compared to the control group for the following measured outcomes (p<0.05): UPDRS-3 (p=0.03; 95% CI, -5.52 to -0.24), BBS (p=0.04; 95% CI, 0.59 to 6.45), 10MWT (p=0.01; 95% CI, -2.19 to -0.42), and 6MWT (p=0.04; 95% CI, 1.81 to 96.72) Conclusion: The results of this study revealed that trunk exercise using PNF plus treadmill training improves balance and walking ability as compared to conventional training plus treadmill training in patients with Parkinson's disease.