• Journal of Animal Science and Technology
• /
• v.45 no.2
• /
• pp.219-228
• /
• 2003

Two experiments were conducted to investigate the influence of dietary supplementation of yeast culture on the nutrient digestibility, performance and meat quality in growing-finishing pigs. Corn-soy basal diets contained 20, 18, and 16% CP and 3,265kcal/kg ME at different growth stages. One hundred and twenty pigs(8wk-old) were allocated into four supplementation levels of yest culture (0, 0.1, 0.2, 0.4%) in Expt 1. Weight gain, feed intake and feed efficiency were periodically recorded for 112 days. A metabolic feeding trial was conducted to measure the nutrient digestibility. Physical and chemical characteristics of the Longissimus Dorsi muscle(LM) from the pigs were measured at the end of experiment (Expt 2). In Expt 1, weight gain and feed efficiency were not different among the dietary treatment groups during the overall period. The digestibilities of protein and fiber were greater in 0.1% and 0.2% yeast culture-supplemented groups than in control (P<0.05). However, fat and ash digestibilities were not improved by the dietary treatment. In Expt 2, the LM protein content in 0.1% yeast culture-supplemented group, but not in 0.2% or 0.4%-supplemented group, was greater than that in the control group (P<0.05). The LM pH, purge loss, cooking loss and color were not affected by the dietary treatment. The LM shearing force was less in 0.2% yeast culture-supplemented group than in the control group (P<0.05). Other LM physicochemical properties did not differ between the dietary treatment groups. Total saturated and unsaturated fatty acids percentages and total cholesterol content of the LM did not differ across the dietary treatment groups.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.7
• /
• pp.1017-1024
• /
• 2011

Korean wheat semolina (FS: fine semolina) with similar characteristics to durum wheat semolina was substituted at rates of 0, 10, 20, 30, 40, and 50% in pasta dough and the physical and cooking characteristics were investigated for making optimal pasta. Water absorption of the dough increased with the 10, 20, and 30% substitution ratio of FS. Development times were high with >30% substituted FS. This result positively influenced an increase in production and the preparation of the fresh noodle pasta. Furthermore, soft textured fresh noodles could be made due to the decrease in stability and increased weakness of the >30% substituted FS. The amylograph gelatinization characteristics of Korean wheat semolina exhibited an increase of gelatinization temperature and decrease of maximum viscosity when compared with durum wheat. The handling property of the dough showed more than 4 points in all sample groups. Weight and volume decreased and turbidity and cooking loss increased according to the increasing amount of substituted FS. However, samples with ${\leq}$ 30% FS substitution ratio had similar volumes and cooking losses when compared to the control. The L- and a-values increased and the b-value of color decreased as more FS was added. In a texture analysis, the hardness of the cooking noodles showed a low value with the >30% substituted FS. Springiness, gumminess, and chewiness exhibited a high value. In the results of a sensory evaluation, overall acceptability was high score with more than 7 points for the 30% added FS. The preferences for pasta colors were divided into white, which is similar to the Korean traditional noodle, and yellow, which is similar to durum wheat. Flavor and taste were not affected by substituting with FS. Low hardness and high chewiness was the most preferred noodle. These results suggest that >30% substituted FS was suitable for increasing quality and organoleptic qualities of Korean wheat pasta.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.1
• /
• pp.1-9
• /
• 1977

The purpose of this study is to complish a method of fish glue malting with residual products such as fish head and skin discarded from sea food processing. Using the skins of Alaska pollack and file fish from fillet packers, the optimum conditions of skin glue processing were investigated and physical and chemical properties of the product were also determined. The yields of Alaska pollack, Thelagra calcogramma, skin and file fish, Novodon modestus, skin to the total body weight were $4.6\%\;and\;5.0\%$ respectively. The optimum conditions for a $49.3\%$n yield Alaska pollack skin glue processing were considered the extraction of previously tinted in $0.1\%$ calcium hydroxide solution for 3 hours with the additional water as much as 3 times of sample weight at $70^{\circ}C$ for 3 hours under the controlled pH 5.0. The conditions for file fish skin glue were similar to those of Alaska pollack except the addition of five times of water to the weight of sample skin needed for extraction. The content of crude protein of Alaska pollack and file fish skin glue were $98.0\%\;and\;96.0\%$ respectively. The contents of crude ash and crude lipid were not different from that of chemical grade gelatin. Relative viscosity, melting point, gelation temperature and jelly strength of Alaska pollack skin glue marked 5.84, $21.8^{\circ}C,\;7.1^{\circ}C\;and\;10.0g$ respectively and those of file fish skin glue showed $5.79,\;25.0^{\circ}C,\;7.4^{\circ}C\;and\;11.6g$ respectively.The color and turbidity of Alaska pollack skin glue are slightly superior to those of file fish skin glue. It is supposed that the extract residue of skin glue is valuable for use the animal feeds by the results of amino acid composition. And the ratio of each amino acid content to the total amino acid of Alaska pollack and file fish skin glue is similar to that of chemical grade gelatin.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.1
• /
• pp.3-11
• /
• 1989

This study was carried out to investigate the physical and mechanical properties. durability of adhesive bond and paint film for the basic data which were required to determine the suitability as a raw material for furniture the laminated veneer lumber (LVL) with pitch pine (Pinus rigida Mill). The results obtained were as follows; 1) The proper pressing time for making the LVL was over 45 second per milimeter of LVL thickness. 2) The bending strength of the LVL was lower than that of the solid wood but the compressive strength of the LVL was similar to that of the solid wood. The strength increased with the decrease of veneer thickness. 3) The impact bending absorbed energy of the LVL was 0 to 0.3 kg.m/$cm^2$ in the direction of parallel to the grain. The energy of the LVL was lower than that of the solid wood (0.68 kg.m/$cm^2$). 4) In warm water soaking and cold-dry tests, delamination of adhered layers surface crack, swelling, and color change were not found when the hot pressing time was over 45 second per milimeter of LVL thickness. As a result of soak under vacuum test shrinkage in the direction of parallel to the grain was about -1.0 percent and. was about 3.0 percent in the direction of the perpendicular to the grain. 6) The film cacks on the LVL's surface after the wet and cold-dry test were not found at all. 7) In the use of the LVL for interior decoration it was considered that the surface of the LVL be overlaid crossly with fancy veneers of birch and paulownia, etc. This cross overlayirg methods have resulted in few cracks on the fancy veneer.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.8
• /
• pp.1170-1176
• /
• 2016

The aim of this study was to investigate the effects of screw speed, moisture content, and die temperature on the physical properties of extruded soy protein isolate. Extrusion conditions were moisture content (20 and 25%) and die temperature (120, 130, and $140^{\circ}C$) at a fixed screw speed of 250 rpm. The other extrusion conditions for screw speed (150, 200, 250, 300, and 330 rpm) were a fixed moisture content and die temperature of 30% and $140^{\circ}C$, respectively. Specific mechanical energy input decreased as die temperature increased from 120 to $140^{\circ}C$, whereas specific mechanical energy input increased as screw speed increased from 150 to 330 rpm. Expansion ratio and specific length increased as die temperature increased. Breaking strength decreased as die temperature increased and moisture content decreased. A lower moisture content resulted in a greater color difference. Integrity index increased as die temperature increased from 120 to $140^{\circ}C$ and moisture content decreased from 25 to 20%. Nitrogen solubility index decreased as screw speed increased from 150 to 330 rpm. Nitrogen solubility index was lowest at $2.83{\pm}0.51%$ as screw speed decreased to 150 rpm. In conclusion, moisture content was a more important factor than die temperature for texturization of soy protein isolate.

• Journal of Animal Science and Technology
• /
• v.55 no.3
• /
• pp.211-217
• /
• 2013

The objective of this study was to investigate the physical and chemical composition, fatty acid profile and sensory property of horse meat according to meat quality grade (1 and 2) and cuts (loin, chuck roll and top round). The lipid content of loin was significantly higher (p<0.05) in grade 1 (4.65%) compared with grade 2 (2.31%), whereas moisture content was lower (p<0.05) in grade 1 than in grade 2. The pH value was significantly lower (p<0.05) in loin than in other cuts regardless of meat quality grade. Shear force value of loin was significantly different (p<0.05) between grades 1 (5.87 $kg/cm^2$) and 2 (10.86 $kg/cm^2$). Water-holding capacity values of loin, chuck roll and top round were not different (p>0.05) between grades 1 and 2. Meat color values ($L^*$, $a^*$ and $b^*$) of loin, chuck roll and top round were not different (p>0.05) between grades 1 and 2. Palmitoleic acid of loin in grade 1 (11.39%) was higher (p<0.05) than that in grade 2 (5.36%). Stearic acid of loin in grade 1(3.58%) was lower (p<0.05) than that in grade 2 (7.02%). Overall palatability of loin, chuck roll and top round did not differ (p>0.05) between grades 1 and 2. Therefore, meat quality grade had mainly affected lipid and moisture contents, shear force, palmitoleic acid and stearic acid of horse loin; and horse loin of grade 2 had lower pH and higher $L^*$, $a^*$ and $b^*$ than the other cuts.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.5
• /
• pp.208-215
• /
• 2005

The 10mm diameter aggregates made of clay, carbon and $Fe_2O_3$ were prepared to investigate the mechanism of black core formation. The specific gravity, absorption rate, percent of black core area, fracture strength, total Fe analysis, and XRF were measured at various compositions, sintering temperatures, sintering times, sintering atmospheres, and sintering methods. Small addition of $Fe_2O_3$ did not affect physical properties of the aggregates; however, the percent of black core area increased with increasing carbon contents and increasing sintering temperature. Specific gravity of the aggregates decreased and the water absorption ratio increased with increasing percent of black core area. The aggregates sintered at oxidation atmosphere showed clear border between shell and black core area. Hence, the aggregates sintered at reduction atmosphere showed only black core area in the cross-section of the aggregates. The specific gravity of the aggregates sintered at reduction atmosphere increased with increasing carbon contents and that was the lowest of all comparing other aggregates sintered at different atmospheres. Adsorption rate increased with increasing carbon contents at all atmospheres. The fast sintered aggregates showed lower specific gravity, higher absorption rate, and more black core area than the normally sintered aggregates. It was turned out that the aggregates having more black core area showed higher fracture strength than that of aggregates with no black core area. From the total Fe analysis, the concentration of Fe and FeO was higher at black core area than at shell. Because the concentration of $Fe_2O_3$ in the shell was higher than other area, the color of the shell appeared red. It was also turned out from the XRF analysis that carbon was exist only at black core area.

• Culinary science and hospitality research
• /
• v.21 no.1
• /
• pp.77-89
• /
• 2015

The objective of this study was to optimize processing conditions for the production of an instant puffed rice product using response surface methodology (RSM) and contour analysis. Sensory and texture qualities, and physical properties of the puffed rice were analyzed with various processing conditions related to drying and puffing temperature, and moisture content. Preference, color intensity, cohesiveness, rehydration ratio, density and lightness of the puffed rice product significantly varied depending on the processing conditions. The responses showed high $R^2$ values (0.623, 0.852, 0.735, 0.688, and 0.790) and lack-of-fit. Rehydration ratio was found to have a negative correlation with density in the condition of drying and puffing temperature. Lightness and preference scores of the puffed rice increased as the moisture content increased. According to RSM, the preference scores were very highly related to the moisture content, and the optimum processing conditions of the puffed rice product were at $40^{\circ}C$ of drying temperature, with 11.0% of moisture content, and at $232.7^{\circ}C$ of puffing temperature.

• Journal of Life Science
• /
• v.19 no.7
• /
• pp.956-962
• /
• 2009

The aim of this study was to assess the effects of dentifrice-contatning grapefruit seed extract (GSE) and processed sulfur solution (PSS) on antimicrobial effects against oral pathogens. We first evaluated the antimicrobial effects of GSE and PSS against oral microbes: Streptococcus mutans (Sm), Prevotella intermedia (Pi), Porphyromonas gingivalis (Pg) and Candida albicans (Ca). When antimicrobial activity against Sm, Pi, Pg and Ca was tested, at 40 $\mu$l/disk, the inhibition zones of GSE were 11.0, 9.5, 8.0 and 9.0 mm, respectively. With the same method, the inhibition zones of PSS were 2.0, 3.5, 0.0 and 1.5 mm, respectively. In the micro broth dilution method, the MIC values of GSE against Sm, Pi, Pg and Ca were 0.24, 0.06, 0.10 and 15.63 $\mu$l/rnl, respectively. The MIC values of PSS were 0.12, 3.91,>125 and 7.81 $\mu$l/ml, respectively. When pH, refractive index, viscosity and color value of dentifrice-containing GSE and PSS were measured, there were no significant changes in these physical properties compared to the control samples. Antimicrobial activities of dentifrice products containing 0.5% GSE and 0.5% PSS against oral pathogens were 7.3, 4.3, 2.2 and 1.5 mm, respectively. According to these results, we conclude that there may be a role for GSE and PSS in the development of new oral supplies.

• Economic and Environmental Geology
• /
• v.55 no.4
• /
• pp.317-338
• /
• 2022

Physicochemical characteristics and evaluation were studied by subdividing the concretes, bricks and earth pipes on the site of the Japanese Ministry of General Affairs in Joseon Dynasty, known as modern architecture, into three periods. Concretes showed similar specific gravity and absorption ratio, and large amounts of aggregates, quartz, feldspar, calcite and portlandite were detected. Porosity of the 1907 bricks were higher than those of 1910 and 1950 bricks. All earthen pipe is similar, but the earlier one was found to be more dense. Bricks and earthen pipes are dark red to brown in color within many cracks and pores, but the matrix of the earthen pipe is relatively homogeneous. Quartz, feldspar and hematite are detected in bricks, and mullite is confirmed with quartz and feldspar in earthen pipes, so it is interpreted that the materials have a firing temperature about 1,000 to 1,100℃. Concretes showed similar CaO content, but brick and earthen pipe had low SiO₂ and high Al₂O₃ in the 1907 specimen. However, the materials have high genetic homogeneity based on similar geochemical behaviors. Ultrasonic velocity and rebound hardness of the concrete foundation differed due to the residual state, but indicated relatively weak physical properties. Converting the unconfined compressive strength, the 1st extended area had the highest mean values of 45.30 and 46.33 kgf/cm², and the 2nd extended area showed the lowest mean values (20.05 and 24.76 kgf/cm²). In particular, the low CaO content and absorption ratio, the higher ultrasonic velocity and rebound hardness. It seems that the concrete used in the constructions of the Japanese Ministry of General Affairs in Joseon Dynasty had similar mixing characteristics and relatively constant specifications for each year. It is interpreted that the bricks and earthen pipes were through a similar manufacturing process using almost the same raw materials.