• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.11a
• /
• pp.235-239
• /
• 2001

In recent years, as Chemical Mechanical Planarization(CMP) has been routinely utilized in integrated circuit(IC) fabrication, the consumption of slurry, main consumable in a CMP process, is greatly increased. Thus the reprocess of CMP slurries has been actively considered in the industry to reduce cost-of-consumable (COC). The main purpose of this study was to recycle the used oxide slurry using filters as a new method. As a result, Ultra Fine(UF) Filter could distinguish silica from the used oxide slurry and Reverse Osmosis(RO) Filter could distinguish Deionized(DI) Water and chemistry from chemistry solution. The tetraethylorthosilicate removal rate was almost the same as the number of recycle polishing was increased, when it was modified by slightly adding new SS-12 slurry. The microscratch didnt found as the number of recycle polishing was increased.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.9
• /
• pp.2007-2010
• /
• 2009

Donepezil hydrochloride is a reversible acetylcholinesterase inhibitor that is used in the treatment of Alzheimer’s disease to improve the cognitive performance. It shows different crystalline forms including hydrates. Therefore, it is very important to confirm the polymorphic forms in the formulations of pharmaceutical materials because polymorphs of the same drug often exhibit significant differences in solubility, bioavailability, processability and physical/chemical stability. In this paper, four different forms of donepezil hydrochloride were prepared and characterized using X-ray powder diffraction, Fourier transform infrared, and solid-state nuclear magnetic resonance (NMR) spectroscopy. This study showed that solid-state NMR spectroscopy is a powerful technique for obtaining structural information and the polymorphology of pharmaceutical solids.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.609-611
• /
• 2004

Sodium salt of photoluminescent Eu-containing polyoxometalate (Eu-POM) was newly synthesized and its chemical structure and physical properties characterized. The Eu-POM was unstable outside the pH range 5.5-8.5, and a pH just over 7 gave the best yield. We have investigated the photoluminescent properties of Eu-POM with changing the reactants ratio of heteropolytungstate and $EuCl_3{\cdot}6H_2O}$. The Eu-POM was characterized by UV/Vis, FT-IR, $^1H$-NMR, PL and XPS. Eu-POM emits orange light of 590nm when excited with the light of 280nm. Furthermore, we made dodecyltrimethylammonium (DDTA) salt of Eu-POM (Eu-POM/DDTA) by exchange of the counter cation. The Eu-POM/DDTA is soluble in common organic solvents, while Eu-POM is only soluble in water. And it emits reddish orange light of 625nm when excited with light of 250nm.

• Proceedings of the KIEE Conference
• /
• 2006.10b
• /
• pp.171-174
• /
• 2006

본 연구에서 새로 합성한 적색 도판트 Red-1을 Physical vapor Deposition (PVD) 법을 이용하여 다층구조의 유기 발광 다이오드를 제작하였다. 적층된 유기물 층으로 정공주입층은 4,4',4"-tri [2-naphthyl(phenyl)amino]triphenylamine(2-TNATA) 정공 수송층으로4-4bis [N-(1-napthyl-N-phenyl-amino)biphenyl] (NPB)를 사용하였으며 전자 수송층은 tris (8-quinolinolato)-aluminum ($Alq_3$), 발광층에서의 host 재료로 사용한 물질은 $Alq_3$. 4,4'- N-N'-dicarba zole-biphenyl (CBP), 게스트재료는 Red-1, 정공저지층으로 2,9-dimethyl-4, 7-diphenyl -1 10-phen antroline (BCP), 전자 주입층으로는 lithiumquinolate (Liq)를 사용하여 보다 향상된 전기적, 발광특성을 보이는 소자를 제작하였다. 전하를 주입하는 전극으로 일함수가 큰 투명전극인 ITO (indium-tin-oxide)를 양전극으로, Al을 음전극으로 사용하였다. 그리하여, 발광층 내에서의 host재료 $Alq_3$와 CBP와의 energy transfer의 관점에서 그 특성을 연구하였다.

• Journal of the Korean Ceramic Society
• /
• v.24 no.5
• /
• pp.431-436
• /
• 1987

High purity Al2O3 has been extracted from serlcite of clayminerals, selicite was treated by H2SO4(2N∼18N) solution, NH4OH treatment(PH8.5∼10.0) and metallic impurities such as Fe were removed by NaOH treatment. The tendency of extraction yield of ${\alpha}$-Al2O3 have been investigated by relating reaction time, acid concentration. Reaction products were analyzed by DT-TGA, chemical analysis and X-ray diffractometer. Prepared ${\alpha}$-Al2O3 power is fired in air at 1400$^{\circ}C$, 1600$^{\circ}C$ 2hr. The results are as follows; 1. The most suitable extracting conditions of ${\alpha}$-Al2O3 from Selicite were N-H2SO4, 120 min acidtreating time. 2. The optimum pH condition was 9.0. 3. Physical properties of sintered Al2O3 bodies were as follows. Relative density is 99%. Water absorption is 0.26%. Rock well hardness is 89.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.248-251
• /
• 2005

Graphite reinforced conductive polymer composites for PEMFC bipolar plates were fabricated by the compression molding technique. Graphite powder was mixed with an phenol resin to impart electrical property in composites. In this study, conductive polymer composites with high filler $loadings(>60wt.\%)$ were manufactured to accomplish high electrical conductivity above 100S/cm. The level of compaction is important because graphite powder increase electrical conductivity of composites by direct physical contact between particles. The optimum molding pressure according to filler was proposed experimentally. Various tests(electrical conductivity, flexural strength, compressive strength, leach test, etc) were carried out to verify the performance of fabricated composites for PEMFC bipolar plates. Fabricated composites have good electrical conductivity and mechanical strength. The results of leach test and contact angle measurement showed similar characteristics compared with commercial bipolar plates.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.35-35
• /
• 2011

The design and preparation of novel dye rotaxanes have gained much interest recently, since such structure usually exhibits peculiar spectral and optical changes. In spite of the promising results to date, increasing pressure remains to develop novel supramolecular structures based on stimuli-responsive systems. This presentation covers the study of inclusion complexes of cyclodextrins and various chromophores, with an emphasis on our most recent outcome of anisotropic hydrogel. In this system, physical gelation prepared from simple mixture of CD and a azo dye is completed through specific host-guest interaction. The obtained hydrogel exhibits respective morphological transitions based on supramolecular assembly and dissociation, leading to either precipitation or a sol-to-gel transition. It can identify different classes of metal ions, and, among them, naked-eye differentiation of lead ion is possible due to the coordination-induced unthreading of dye molecules. Accompanying structural changes were verified by numerous characterization techniques, including 2D-ROESY, HR-MAS, UV-Visible absorption, small-angle X-ray scattering, and induced circular dichroism measurements. Such properties discussed here will find useful in analytical applications, such as metal ion sensing and removal applications.

• Journal of Pharmaceutical Investigation
• /
• v.22 no.3
• /
• pp.17-34
• /
• 1992

A novel drug delivery system, detergent-phospholipid mixed micelles as proliposomes, for water-insoluble compounds was developed by investigating (i) spontaneous formation of small unilamellar vesicles (SUV) from bile salt-egg phosphatidylcholine mixed micelles, (ii) the molecular mechanism of micelle-to-vesicle transition in aqueous mixtures of detergent-phospholipid, (iii) preparation and screening of a suitable liposomal formulation for a lipophilic drug: solubilization of the drug within the lipid bilayer, evaluation of the solubility limit, and characterization of the resulting product with respect to the physical properties and stability of the drug in the system, and (iv) testing antitumor activity in vitro. The results showed that the new carrier had a strong possibility to be a biocompatible universal formulation for water-insoluble drugs.

• Current Research on Agriculture and Life Sciences
• /
• v.27
• /
• pp.35-41
• /
• 2009

In this study, waste natural fibers and natural adhesions were used to prepare an environmental biodegradable nonwoven type mulching material. Especially, the nonwoven mulching with higher content of cotton shows a improved biodegradation. Also, the physical properties of nonwoven mulching with different ratios of cotton/rayon were studied. It was found that the degree of biodegradation was controlled by the type of nonwoven materials and adhesions.

• Progress in Superconductivity
• /
• v.4 no.2
• /
• pp.168-171
• /
• 2003

It was known that properties of superconducting tapes could be influenced by mechanical processing method. In this presentation, the effect of drawing method on the final properties of superconductor tape has been systematically studied. Firstly, BSCCO/Ag tapes have been fabricated via two-stage drawing method and conventional rolling process. The two-stage drawing process consists of circular dies drawing and rectangular dies drawing. Important parameters such as fill factor and critical current values of fully processed superconducting tapes have been evaluated to elucidate the effect of drawing method.