• Carbon letters
• /
• 제13권4호
• /
• pp.212-220
• /
• 2012

Orange peel (OP) exhibits a sorption capacity towards anionic dyes such as reactive blue 19 (RB19). Cetyltrimethylammonium bromide (CTAB) as a cationic surfactant was used to modify the surface nature of OP to enhance its adsorption capacity for anionic dyes from an aqueous solution. Four adsorbents were investigated: the OP, sodium hydroxide-treated OP (SOP), CTAB-modified OP and CTAB-modified SOP. The physical and chemical properties of these sorbents were determined using nitrogen adsorption at 77 K and by scanning electron microscope and Fourier transform infrared spectroscopy techniques. The adsorption of the RB19 dye was assessed with these sorbents at different solution pH levels and temperatures. The effect of the contact time was considered to determine the order and rate constants of the adsorption process. The adsorption data were analyzed considering the Freundlich, Langmuir, Elovich and Tempkin models. The adsorption of RB19 by the assessed sorbents is of the chemisorption type following pseudo-first-order kinetics. CTAB modification brought about a significant increase in RB19 adsorption, which was ascribed to the grafting of the sorbent with a cationic surfactant.

• 한국폐기물자원순환학회지
• /
• 제34권5호
• /
• pp.468-473
• /
• 2017

This study was carried out to examine the characteristics of hydrogen sulfide adsorption using an iron hydroxide-based adsorbent. The prepared adsorbent was discussed with regard to its adsorption capacity and analyzed via surface analysis methods to illustrate the physical characteristics of hydrogen sulfide adsorption. As the drying temperature increased, the adsorption capacity of the adsorbent decreased from 29.15wt% to 22.73wt%. The adsorption capacity was decreased as the space velocity increased and showed an adsorption capacity of about 3.65 at $3,157.6h^{-1}$. The effect of sulfur dioxide was to decrease the adsorption capacity from 29.15wt% to 27.94wt%. The adsorbent exhibited the amorphous type in its physical appearance based on XRD and EDS analysis.

• Carbon letters
• /
• 제12권3호
• /
• pp.152-161
• /
• 2011

Activated carbon was prepared from pre-carbonized petroleum coke. Textural properties were determined from studies of the adsorption of nitrogen at 77 K and the surface chemistry was obtained using the Fourier-transform infrared spectrometer technique and the Boehm titration process. The adsorption of three aromatic compounds, namely phenol (P), p-nitrophenol (PNP) and benzoic acid (BA) onto APC in aqueous solution was studied in a batch system with respect to contact time, pH, initial concentration of solutes and temperature. Active carbon APC obtained was found to possess a high surface area and a predominantly microporous structure; it also had an acidic surface character. The experimental data fitted the pseudo-second-order kinetic model well; also, the intraparticle diffusion was the only controlling process in determining the adsorption of the three pollutants investigated. The adsorption data fit well with the Langmuir and Freundlich models. The uptake of the three pollutants was found to be strongly dependent on the pH value and the temperature of the solution. Most of the experiments were conducted at pH 7; the $pH_{(PZC)}$ of the active carbon under study was 5.0; the surface of the active carbon was negatively charged. The thermodynamic parameters evaluated for APC revealed that the adsorption of P was spontaneous and exothermic in nature, while PNP and BA showed no-spontaneity of the adsorption process and that process was endothermic in nature.

• 한국응용과학기술학회지
• /
• 제17권2호
• /
• pp.149-156
• /
• 2000

For the adsorption of polyelectrolyte at the surface of polyacrylamide gel particle, preferential adsorption of the large polyelectrolyte such as DNA is governed by the surface area of an adsorbent. The adsorption equilibrium constant can be varied by surface geometry of porous polymer, and it can be described as a function of ionic strength and surface area. Physical parameters affecting the adsorption were estimated using the theoretical governing equation of polyelectrolyte which electrophoretically moved along the column, and geometrical surface area was estimated by Waldman-Mayer's physical model. The separation of polyelectrolytes was studied using the physical parameters estimated by ionic strength and surface geometry.

• Bulletin of the Korean Chemical Society
• /
• 제2권2호
• /
• pp.56-59
• /
• 1981

In this paper a further generalization of the theory of multilayer physical adsorption previously developed by the authors is attempted so that the effect of vertical interactions between adsorbent and adsorbate can be explicitly taken into account. In this attempt we have to discard the previously adopted assumption that the molecules in the second layer or above are all in the same physical state. In order to estimate the effect of vertical interactions on the adsorption isotherm the interaction energy between an adsorbed molecule and the adsorbent surface is assumd to vary as $r^{-3}$ where r is the distance that the molecule under consideration is separated from the adsorbent surface. Resulting adsorption isotherm is applied to interpret the adsorption data of tetramethylsilane vapor on iron film and good agreements between observed and calculated values are obtained over wide range of pressure.

• Carbon letters
• /
• 제10권4호
• /
• pp.293-299
• /
• 2009

Potassium hydroxide activated carbons were prepared from Egyptian petroleum cokes with different KOH/coke ratios and at different activation temperatures and times. The textural properties were determined by adsorption of nitrogen at $-196^{\circ}C$. The adsorption of iodine and methylene blue was also investigated at $30^{\circ}C$. The surface area and the non-micropore volume increased whereas the micropore volume decreased with the increase of the ratio KOH/coke. Also the surface area and porosity increased with the rise of activation temperature from 500 to $800^{\circ}C$. Textural parameter considerably increased with the increase of activation time from 1 to 3 h. Further increasing of activation time from 3 to 4 h was associated with a less pronounced increase in textural parameters. The adsorption of iodine shows the same trend of surface area and porosity change exhibited by nitrogen adsorption, with KOH/coke ratio and temperature of activation. Adsorption of methylene blue follows pseudo-first-order kinetics and its equilibrium adsorption follows Langmuir and D-R models.

• Journal of the Korean Physical Society
• /
• 제73권9호
• /
• pp.1324-1328
• /
• 2018

By employing ab-initio total-energy and electronic-structure calculations based on the density-functional theory, we studied the effects of surface strain ${\varepsilon}_s$ on the adsorption properties of a Au adatom on defective MgO(001) surfaces with surface oxygen vacancies ($F_s$ centers). The formation energy of the $F_s$ center on MgO(001) varied very slightly in the region of ${\varepsilon}_s$ from -6% to -4% and monotonically decreased with the increase in ${\varepsilon}_s$, from -4% to +6%. As ${\varepsilon}_s$ increased, the adsorption energy ($E^{Fs}_{ads}$) of Au on the $F_s$ center of strained MgO(001) monotonically decreased and, in particular, showed a much larger decrease in $E^{Fs}_{ads}$ for a tensile surface strain of ${\varepsilon}_s$ > +4%. The surface strain dependence on the physical properties, such as the charge states, the spatial charge rearrangement, for Au on the $F_s$ center of strained MgO(001) surfaces was also analyzed. These results provide important physical information on the effects of surface strain on the adsorption of Au on MgO(001) surfaces with $F_s$ centers.

• 한국물환경학회지
• /
• 제26권3호
• /
• pp.491-496
• /
• 2010

This study aimed to obtain equilibrium concentration on adsorption removal of phosphorus by activated carbon, to express the adsorption characteristics following Freundlich isotherm and also, based on the value obtained, to investigate the relationship between physical properties of activated carbon and dynamics of phosphorus removal by obtaining rate constant and effective pore diffusivity. The results summarized from this study are as follows. Phosphorus adsorption equilibrium reaching time of powdered activated carbon was reduced as the dosage of activated carbon increases, while granular activated carbon despite increased dosage did not have influence on adsorption equilibrium reaching times of phosphorus as well, taking more than 10 hours. It was also noted that powdered activated carbon showed better adsorption ability than granular activated carbon. The value of constant (f) of Freundlich isotherm of powered activated carbon on phosphorus was 4.26 which is bigger than those of granular activated carbon. The adsorption rate constant on phosphorus of powered activated carbon with low effective diameter and iodine number was highest as $8.888hr^{-1}$ and the effective pore diffusivity ($D_e$) was lowest as $2.45{\times}10^{-5}cm^2/hr$, and the value of phosphorus adsorption rate constant of granular activated carbon was $0.174{\sim}0.372hr^{-1}$, It was revealed that, with the same amount of dosage, the adsorptive power of activated carbon with lower effective diameter was better and its rate constant was also high.

• 대한화학회지
• /
• 제15권5호
• /
• pp.265-274
• /
• 1971

A significant structure theory of monolayer physical adsorption is developed. The theory is tested with the adsorptions on graphite of gases Ar, $N_2$, $CHCl_3$, and $CCl_4$. A restricted rotation model is used for the polyatomic molecules $N_2$, $CHCl_3$, and $CCl_4$. The computed isotherms and heats of adsorption are in good agreement with experiment in all cases studied.

• 한국물환경학회지
• /
• 제24권3호
• /
• pp.311-316
• /
• 2008

This study aimed to obtain equilibrium concentration on adsorption removal of ammonia nitrogen by activated carbon, to express the adsorption characteristics following Freundlich isotherm and also, based on the value obtained, to investigate the relationship between physical characteristics of activated carbon and dynamics of ammonia nitrogen removal by obtaining rate constant and effective pore diffusivity. The results summarized from this study are as follows. It was noted that powdered activated carbon showed better adsorption ability than granular activated carbon. The value of constant (f) of Freundlich isotherm of powered activated carbon was $4.6{\times}10^{-8}$ which is bigger than that of granular activated carbon. The adsorption rate constant on ammonia nitrogen of powered activated carbon with high porosity and low effective diameter was highest as 0.416 hr-1 and the effective pore diffusivity ($D_e$) was lowest as $1.17{\times}10^{-6}cm^2/hr$, and the value of ammonia nitrogen adsorption rate constant of granular activated carbon was $0.149{\sim}0.195hr^{-1}$. It was revealed that, with the same amount of dosage, the adsorptive power of activated carbon with lower effective diameter and bigger porosity was better and its rate constant was also high. With a little adsorbent dosage of 2 g, there was no difference removal ability of ammonia nitrogen as change of adsorption properties.