• Journal of Pharmaceutical Investigation
• /
• v.37 no.3
• /
• pp.149-158
• /
• 2007

To investigate the permeability of lidocaine, percutaneous absorption studies were performed using excised hairless mouse skin and the penetration of lidocaine via the skin was determined. To increase the skin permeation of lidocine, the effects of $Labrasol^{(R)}$, $Labrafil^{(R)}$, $Labrafac^{(R)}$ and $Transcutol^{(R)}$ were investigated. The skin permeation of lidocaine was increased when $Labrasol^{(R)}$ and $Transcutol^{(R)}$ were used as permeation enhancer. To evaluate the influence of ultrasound, various factors such as application modes (continuous mode and pulsed mode), frequency (1.0 and 3.0 MHz) and intensity (1.0, 1.5 and 2.0 w/$cm^2$) were investigated with lidocaine hydrogel. The pronounced effect of ultrasound on the skin permeation of lidocaine was observed at all ultrasound energy levels. The influence of frequency having an effect on skin permeation rate was higher in the case of using 1 MHz, 2.0 w/$cm^2$ and continuous treatment. As the intensity of ultrasound increased, the permeation of lidocaine was accelerated. The in vivo anesthetic effects were evaluated by two aspects as mechanical threshold and electrical threshold. Six healthy volunteers consented to the randomized, double-blind, and cross-over designed study in each group. In each subject, 3 groups were adapted such as K group (ultrasound with gel base only), L group (lidocaine gel) and B group (ultrasound with lidocaine gel). In conclusion, lidocaine was potent anesthetic which could be block pain threshold effectively. And ultrasound could accelerate the skin penetration of lidocaine. The phonophoretic delivery system could be a good candidate for lidocaine as a local anaesthetic to improve the skin permeation and in vivo anaesthetic effect.

• Journal of Conservation Science
• /
• v.31 no.4
• /
• pp.457-476
• /
• 2015

This study is expected to present instructions and analysis of Modern Dancheong pigments by its physical characteristics. Search pigments currently used and experiments proper mixing ratio of Jangdanyuksaek(Incarnadine). Samples are made by based on presented a mixture ratio which is less exfoliation, cracks and color change. And put into accelerated weathering test and ultraviolet ray degradation test. As a result in case of Jidang($TiO_2$) Rutile type is superior in discoloration and durability. Rutile type makes color difference remarkably because of oil absorption difference while mixing with Jangdan. Water paints which are used as a alternative present yellowness which means water paints lack in durability. whiting should be taken carefully as it has high brightness after degradation.

• Journal of Nutrition and Health
• /
• v.21 no.1
• /
• pp.23-35
• /
• 1988

This study was designed to find out the effects of aerobic exercise on lipid and Ca metabolism in seven healthy college women, aged 20 to 22 years. Metabolic studies were conducted before and after a 10-weeks exercise period, during which subjects participated in the planned aerobic dance program every day except Sunday. The initial mean time engaged in the exercise was 28 minutes and it was gradually increased up to 45 minutes around the middle point of the exercise period. During both of metabolic study periods, the subjects ate experimental diets which supplied about 120g of protein and 600mg of Ca daily and during the rest of the experimental period they ate their usual diets. The use of alcoholic beverages and drugs were prohibited. The results were summarized as follows. 1) The effect of exercise on lipid metabolism. (1) Mean body weight decreased significantly after exercise(p<0.01) and it did not show a significant decline in skinfold thickness and total body fat contents. (2) Serum total cholesterol level decreased significantly after exercise(p<0.05) and TG level also tended to be lower than that of pre-exercise period. Exercise did not exert any influence on the level of serum HDL-cholesterol in this study. (3) Exercise did not alter total lipid content in feces and apparent lipid absorption rate. 2) The effect of exercise on Ca and P metabolism. (1) After exercise, focal Ca excretion was slightly reduced, however, urinary Ca excretion was not significantly changed. In the results, a slight increase was shown in body Ca retention after exercise. (2) Exercise tended to increase urinary P excretion, but neither P balance nor fecal excretion was significantly changed after exercise. (3) Bone mineral content was not affected by exercise. In summary, aerobic exercise decreased total cholesterol and TG level in serum and tended to increase body Ca retention. With the results, it can be concluded that the additional physical activities beyond the normal daily life in college women might prevent some degenerative diseases-suchas atherosclerosis and osteoporosis.

• Macromolecular Research
• /
• v.14 no.2
• /
• pp.173-178
• /
• 2006

Poly(3-(2-hydroxyethyl)thiophene) (P3HET) was synthesized using oxidative coupling polymerization that involved the protecting and deprotecting of hydroxyl groups but not the chlorine substitution or oxidative decomposition of the hydroxyl groups. The resulting P3HET exhibited good solubility in aprotic solvents, in contrast to the insoluble polymer product synthesized directly from the monomer, 3-(2-hydroxyethyl)thiophene (3HET). P3HET had low conductivity due to the strong hydrogen bonding of its hydroxyl groups. The ester-functionalized poly(3-(2-acetoxyethyl)thiophene) and poly(3-(4-pentylbenzoateethyl)thiophene) were also prepared with reasonably high molecular weights in order to examine how this functionalization modified the physical and chemical properties of P3HET. These polymers exhibited better solubility in common solvents and higher conductivity than P3HET. All these polymers exhibited bathochromic shifts of their film state absorption maxima with respect to those found in the UV-visible spectra of their solution phases. The extent of the bathochromic shift was found to vary with the lengths of the side chains of the ester-functionalized polymers.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.1
• /
• pp.33-41
• /
• 2013

This study was performed to analyse cause of quality deterioration using byproduct of plywood and to determine physical and mechanical properties of particleboard used new bonding condition we found. The result of bending strength of Com-Ply board using EMDI is 57.7 $N/mm^2$ on linear direction and 25.1 $N/mm^2$ on vertical direction. EMDI has better water-resisting qualities than Urea formaldehyde adhesive according to result of thickness swelling and water absorption test. Pre-treatment soaked particle 72 hours in water caused increase of HCHO emission.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.06a
• /
• pp.129-129
• /
• 2011

The limited understanding of the surface properties of $Pt_3Ni$ for the oxygen reduction reaction (ORR) in polymer electrolyte membrane fuel cell (PEMFC) has motivated the study of properties and electronic structures of seven layered $Pt_3Ni$ (001), (110), and (111) surfaces. The first principle method based on density functional theory (DFT) is carried out. It is found that the bulk $Pt_3Ni$ has a ferromagnetic ground state with the ordered fcc type L12 structure, which is in good agreement with other results. Non magnetic Pt has the induced magnetic moment due to the strong hybridization between 3d Ni and 5d Pt. The magnetic moment of Pt and Ni enhanced on the surface of each due to surface effect however the magnetic moment of surface Pt in the Pt-segregated Pt3Ni (111) decreased and the magnetic moment of Ni in Ni rich subsurface increased significantly. The calculated d band centers of Pt explain the possibilities for oxygen absorption and play the important roles in altering the catalytic properties. The spin polarized densities of states are presented in order to understand physical properties of Pt in different surfaces in detail.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.5
• /
• pp.222-226
• /
• 2006

Effects of a carboxylated styrene-butadiene-based liquid additive on the microstructure, mechanical strength and decolorization resistance of inorganic pigment layer in the color block have been examined. More dense inorganic pigment layer characterized by lower apparent porosity, lower water absorption and uniform pigment distribution has been achieved by incorporation of a liquid additive. Also significant enhancements in the mechanical strength and decolorization resistance have been observed.

• KSBB Journal
• /
• v.31 no.4
• /
• pp.256-262
• /
• 2016

The need for natural cosmetic ingredients has been increasing over the world nowadays. Agarose, a natural polymer from red seaweeds, has high hydrophilic character and a function of scaffolder. As skin moisturizer, agarose is adequate for percutaneous absorption. While, blueberry fruits extract possesses rich procyanidins and anthocyanins which show health benefits, anti-oxidant effect, anti-aging and anti-melanogenesis. Stability, sensory preference, skin trouble of the emulsion formula are important for cosmetic product development. In this study, we manufactured an emulsion formula for skin moisturizers using the two ingredients and tested emulsion stability and skin trouble. Total phenolic contents of the blueberry fruits extract were evaluated as well as tyrosinase inhibitory and collagenase inhibitory activities. $IC_{50}$ values of blueberry fruits extract for anti-tyrosinase and anti-collagenase activities were 168 and $112{\mu}g/mL$, respectively using gallic acid as a control ($64.8{\mu}g/mL$). The stability (pH and viscosity) of the formula containing 2% blueberry fruits extracts and 0.1% agarose was measured at five different temperatures (room temp., $25^{\circ}C$, $55^{\circ}C$, $45^{\circ}C$, $55^{\circ}C$) under the sun light at 2 day intervals for 12 days. There has been little pH change at the different temperatures. According to the sensory evaluation, there was no significant flavor, discoloration and physical changes of the formula at $25-65^{\circ}C$. These results suggest that emulsion formula containing blueberry extract and agarose could be used as a candidate for lotion and essence products.

• Journal of the Korea Concrete Institute
• /
• v.18 no.3 s.93
• /
• pp.371-378
• /
• 2006

Recently sewage facilities mainly consisted of concrete structures are being deteriorated seriously by biodeterioration originated from sulfur-oxidizing bacteria. In this study, to prevent biochemical corrosion of the sewer concrete, antibiotics which prevent growth of sulfur-oxidizing bacteria were developed and antimicrobial performance of it was investigated. After that, to consider applicability of antibiotics to concrete, physical properties of concrete covered with antibiotics were investigated. As a results of the study, it was proved that the antimicrobial performance of antibiotics was available. Also compressive strength and bond strength of concrete didn't closely connected with antibiotics, and resistance to abrasion, water absorption, air permeability, carbonation, salt damage and chemical attack of concrete was improved remarkably by covering with it.

• Fashion & Textile Research Journal
• /
• v.18 no.1
• /
• pp.120-129
• /
• 2016

This study aimed to develop an optimal sizing system and a draping pattern for hip protector based on an analysis of anthropometric characteristics of Korean older women. A hip protector is a specialized form of pants or underwear containing pads along the outside of each hip. The 3D body scan data of Korean older women were analyzed to identify their anthropometric characteristics and a four-size system with 93% of population accommodation was developed by clustering analysis based on key dimensions derived from factor analysis. The sizing system consists of small/short, large/short, small/tall, and large/tall. A 3D physical model and hip pads were fabricated; then, a hip protector was draped on the 3D model and hip pads. The sizing system of hip protector was analyzed in terms of size and shape and a draping pattern was compared on back center, back side, front side, front center and pad. Lastly, the pattern deformation and clothing pressure were analyzed using the virtual clothing system CLO. Virtual system have disadvantage of not to suggest the objective value. In the future research the wearing comfort and impact absorption of the hip protector needs to be tested and then a hip protector design will be finalized by considering the hip protector's size, material, comfort testing results, aesthetic appeal, protection effectiveness, and practical utility of everyday use.