• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.851-856
• /
• 1996

In this paper, we introduce the design method using CAE(Computer Aided Engineering) which is profitable in the compatability and standardization of the developed product, and the reduction of construction time and price to develop and design a machine equipment. Particularly, we select the standard model to design or develop from the large machinery to the super precision one, extract the peculiar characters of the model by the close analysis of the physical and technical part, the experiment for the characteristics of objective dimensions by analogical mathematical analysis for previous results, and can induce the design model demanded by user investigating optimal data in the design previous We present the analogical algorithms and process method of design factors and restriction factors in the systematization design with computer. Then we analyze step functions for each systematization equipment and induce the process of technical data with actuator model.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.156-160
• /
• 1994

Use of engineering ceramics has been increasing due to the outstanding physical and chemical properties. Conventional machining processes, however, are not applicable due to their hardness and brittleness. Laser cutting is a promising alternative for these ceramics. In this study, experimental data of CO $_{2}$ laser cutting of $Al_{2}$ $O_{3}$ and Si $_{3}$ N $_{4}$ are obtained to give a guide in the industry. Results of $Al_{2}$ $O_{3}$ cutting showed extreme weakness to thermal crack and it was found that pulsed beam has to be used for thick $Al_{2}$ $O_{3}$ specimen. Si $_{3}$ N $_{4}$ showed good results for both CW and pulsed beams. Using pulsed beam resulted narrower kerf width with increased surface roughness a nd reduced cutting speed. It was also found that a parameter call path energy is useful for representing minimum threshold value for possible cutting range with pulsed beam.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.1
• /
• pp.12-20
• /
• 1997

Physical interconnect such as Printed Circuit Board(PCB) traces introduces new challenges for parameter extraction and delay calculation for high-speed system design. PCB traces are dominated by frequency dependent LC propagation which makes precharacterization difficult for all possible configurations. Moreover, simulating the transient behavior of the trace for noise and delay analysis requries the combined used of a variety of models and techniques for efficiently handling lossy, low-loss, frequency dependent, and coupled transmission lines together with lumped elements. In this paper we explain how the frequency dependence caused by ground plane proximity and skin effects can be modeled using the adstracted models. These abstracted (lumped) models are SPICE-compatible and can be simulated in time-domain, along with precharacterized lumped parasitic elements and nonlinear driver and load models.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.261-264
• /
• 1990

The specific contact resistance(SCR) of metal-semiconductor interface is an important design parameter for VLSI interconnecting technology. As the critical feature size of the integrated structures decrease, the physical size of ohmic contacts will also decrease and the series contact resistance will increase. Al-Si contacts on the annealing condition are studied. The propreties of the contacts depend considerably on the annealing procedures. Barrier height is measured from Capacitance-Voltage characteristics. The specific contact resistance are analyzed using a modified four point method.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.2
• /
• pp.94-103
• /
• 2004

The vision system model used for this study involves the six parameters that permits a kind of adaptability in that relationship between the camera space location of manipulable visual cues and the vector of robot joint coordinates is estimated in real time. Also this vision control method requires the number of cameras to transform 2-D camera plane from 3-D physical space, and be used irrespective of location of cameras, if visual cues are displayed in the same camera plane. Thus, this study is to investigate the optimal number of cameras used for the developed vision control system according to the change of the number of cameras. This study is processed in the two ways : a) effectiveness of vision system model b) optimal number of cameras. These results show the evidence of the adaptability of the developed vision control method using the optimal number of cameras.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.2
• /
• pp.77-84
• /
• 2005

Foliated metamorphic, stratified sedimentary and regularity jointed rocks have properties(physical, mechanical) that vary with direction (${\beta}^{\circ}$) and are said to be anisotropic. The ground in Daegu area consists of shales, clastic sedimentary rocks. These shales have plane anisotropic or transversely isotropy characteristics. Engineering characteristics of shale in Daegu area are investigated by performing a series of rock test to the bedding(${\beta}$ =0, 30, 60, and 90 degrees). The results of tests show that the uniaxial compressive strength is a maximum at ${\beta}$ = 0, $90^{\circ}$ and is a minimum when ${\beta}$ is around 60 degree.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.393-396
• /
• 2003

Soil contains the several kinds of metal oxides. Magnetite in soil may contribute the generation of secondary waste during the decontamination of soil by citric acid. Dissolution of magnetite powders by citric acid was investigated in the pH range between 2.0 and 5.0. The dissolution behaviour of magnetite was well described by the equation, A[1 - $e^{-B(x-c)}$]. The parameters of the equation were optimized by the iteration method, and the physical meaning of each parameter was explained. Concentration of each of the dissociated chemical species of citric acid was calculated using the ionization constants. The dissolution reaction was explained by the concentration of the dissociated chemical species of citric acid.d.

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.363-365
• /
• 2007

Titanium and its alloys have excellent corrosion resistance, high strength to weight ratios and high temperature creep properties, which make them using many various fields of application. Responding to these needs, welding processes for titanium are also being used including TIG, MIG, resistance welding, plasma arc welding, diffusion welding, electron beam welding and laser welding. In this study, It is possible to get sound beads without humping bead and spatter with the decrease of peak power according to increase of pulse width and change of welding speed for heat input control at pulsed Nd:YAG laser welding of titanium plates for Lap welding.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.6
• /
• pp.677-682
• /
• 2011

In this study, a simulation model developed for a hydraulic breaker is verified through comparison of simulation results to the experimental results. For performance optimization, the design parameters are selected based on the physical parameters of the equipment for ease of modification. Also a factorial experiment and regression analysis were conducted to observe the effect of each parameter on the performance of the hydraulic breaker. As a result, a method for optimizing the performance of a hydraulic breaker is proposed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.2
• /
• pp.220-227
• /
• 2002

This paper describes an integrated approach process to carry out pre-test, model correlation and updating analysis on the sub-frame of a vehicle. In this study, it was found that the modal test could be more efficient when the exciting point was selected on the area with high driving point residue. Such area could be located with the aid of finite element modal analysis. The model correlation was appraised in conjunction with the modal parameters between modal test and finite elements analysis. Also, the finite element model updating was obtained the good resultant using the iteration method based on sensitivity analysis results that carried out the variation of natural frequencies and MAC for the material properties. Finally, optimization of vehicle subframe was carried out the analysis of core location and physical properties by tow steps.