• 제목/요약/키워드: Physical Parameter

검색결과 871건 처리시간 0.037초

팔걸이 형태에 따른 편마비 환자의 보행 변수 및 비마비측 견갑대의 근활성도 변화 (The Variations in Gait Parameters and the Muscle Activities on the Non-Affected Side of the Shoulder Girdle According to Arm Sling Type in Patients with Hemiplegia)

  • 이옥경;안덕현;유원규;오재섭;윤지연
    • 한국전문물리치료학회지
    • /
    • 제17권3호
    • /
    • pp.77-86
    • /
    • 2010
  • The purpose of this study was to investigate the variations in gait parameters in terms of the type of arm sling used in hemiplegic patients. Ten patients with hemiplegia and ten healthy adults participated in this study and walked at self-selected speeds on a GAITRite-instrumented carpet. The activities of the opposite shoulder girdle muscle including the latissimus dorsi, anterior deltoid, and posterior deltoid were simultaneously recorded using surface EMG during gait. They were randomly assigned a condition: without an arm sling, a single strap arm sling, a Harris hemi arm sling, a Rolyan humeral cuff arm sling, and a Bobath roll arm sling. The following gait variables were analyzed: the temporo-spatial parameters of velocity, step length, stride length, swing phase, stance phase, single support, step time and toe in/toe out. The statistical analysis was one-way ANOVA with repeated measures to compare the variation of each variable. In comparison of parameters in each trial in the hemiplegia group, the non-affected side stride length, single support, and toe in/toe out resulted in statistically significantly changes (p<.05). But without an arm sling group did not show any gait parameter differences with arm slings. This study found that several arm slings varied gait patterns in patients with hemiplegia and in healthy adults. In the EMG analysis, the Rolyan humeral cuff arm sling and the Bobath roll arm sling were higher muscle activity for the latissimus dorsi muscle than did the single strap ann sling. Further study should examine the problems that appeared in patients who worn arm slings by focusing on a larger number of subjects and by studying the variety of responses in more detail using an assessment tool that measures variation.

복부압박벨트가 만성 뇌졸중 환자의 균형 및 보행에 즉각적으로 미치는 융복합적 영향 (Immediate Effects of Abdominal Pressure Belt on Limited of Stability and Gait Parameter in Patients after Chronic Stroke: one-group pretest-posttest design)

  • 박신준;조균희
    • 한국융합학회논문지
    • /
    • 제11권4호
    • /
    • pp.63-69
    • /
    • 2020
  • 본 연구는 복부압박벨트가 만성 뇌졸중 환자의 안정성한계와 보행 변수에 즉각적인 효과를 알아보기 위해 실시하였다. 뇌졸중 환자 30명을 모집하여 복부압박벨트 착용 전과 복부압박벨트 착용 후 변화를 확인하였다. 측정은 균형변수인 안정성한계(limited of stability), 시공간적 보행 변수(spatiotemporal gait parameter)를 측정하였다. 복부압박벨트 착용 후 마비측, 비마비측, 전방, 후방 이동면적이 유의하게 증가하였고(p<.05), 시간적 보행 변수인 분속수(cadence), 보행속도(gait velocity), 공간적 보행변수인 보폭(stride length)이 유의하게 증가하였다(p<.05). 본 연구를 통해 복부압박벨트 착용은 뇌졸중 환자에게 균형과 보행 기능 개선에 즉각적인 효과가 있다는 것을 확인할 수 있었다. 향후 연구에서는 뇌졸중 환자의 균형과 보행 기능 개선에 효율적인 복부압박 수준과 중재기간에 대한 연구가 필요하다.

TTP로 피복된 경사식구조물의 처오름높이 산정식: 사면경사 1:1.5 조건 (Empirical Formula for Wave Runup of Rubble-Mound Structure Covered by Tetrapods: 1:1.5 Slope Condition)

  • 이종인;배일로
    • 대한토목학회논문집
    • /
    • 제35권4호
    • /
    • pp.845-852
    • /
    • 2015
  • 파랑의 처오름높이는 항만 및 호안구조물의 마루높이 산정에 있어 주요한 설계요소이다. 본 연구에서는 TTP로 피복된 경사식구조물을 대상으로 2차원 수리실험을 수행하였으며, 실험에 적용된 실험파는 불규칙파로서 구조물 toe 위치에서 비쇄파, 쇄파 및 쇄파된 파의 조건을 포함한다. 본 실험결과를 이용하여 사면경사 1:1.5인 경사식구조물의 처오름높이를 산정할 수 있는 경험식을 쇄파 유사성 매개변수를 이용하여 제안하였다. 그리고 본 실험결과는 기존 연구결과인 van der Meer and Stam(1992)의 결과와 비교하였다.

Reflection and Dissipation Characteristics of Non-overtopping Quarter Circle Breakwater with Low-mound Rubble Base

  • Balakrishna, K;Hegde, Arkal Vittal;Binumol, S
    • Journal of Advanced Research in Ocean Engineering
    • /
    • 제1권1호
    • /
    • pp.44-54
    • /
    • 2015
  • Breakwaters are the coastal structures constructed either perpendicular (shore connected) or parallel (detached) to the coast. The main function of breakwater is to create a tranquil medium on its leeside by reflecting the waves and also dissipating the wave energy arriving from seaside, resulting in ease of manoeuvrability to boats or ships to their berthing places. Different types of breakwaters are being used at present, such as rubble mound breakwater, vertical wall type breakwater and composite breakwater. The objective of this paper is to investigate reflection coefficients (Kr) and dissipation (loss) coefficients (Kl) for physical models of Quarter circle caisson breakwater of three different radii of 0.550 m, 0.575 m and 0.600 m with S/D ratio of 2.5 (S=spacing between perforations, D=diameter of perforations). The models were tested in the monochromatic wave flume of the department, for different incident wave heights (Hi), Wave periods (T) and water depths (d). It was observed that reflection coefficient increased with increase in the wave steepness (Hi/gT2) and decreased with increase in depth parameter (d/gT2) and hs/d (Height of structure including rubble base/depth of water). The loss coefficient decreased with increase in the wave steepness and increased with increase in depth parameter and hs/d.

K-R 손상이론에 의한 316LN 스테인리스강의 크리프 설계 (Creep Design of Type 316LN Stainless Steel by K-R Damage Theory)

  • 김우곤;김대환;류우석
    • 대한기계학회논문집A
    • /
    • 제25권2호
    • /
    • pp.296-303
    • /
    • 2001
  • Kachanov-Rabotnov(K-R) creep damage theory was reviewed, and applied to design a creep curve for type 316LN stainless steel. Seven coefficients used in the theory, i.e., A, B, k, m, λ, r, and q were determined, and their physical meanings were analyzed clearly. In order to quantify a damage parameter ($\omega$), cavity amount was measured in the crept specimen taken from interrupted creep test with time variation, and then the amount was reflected into K-R damage equations. Coefficient λ, which is regarded as a creep tolerance feature of a material, increased with creep strain. Mater curve with λ=2.8 was well coincided with an experimental one to the full lifetime. The relationship between damage parameter and life fraction was matched with the theory at exponent ${\gamma}$=24 value. It is concluded that K-R damage equation was reliable as the modelling equation for type 316LN stainless steel. Coefficient data obtained from type 316LN stainless steel can be utilized for life prediction of operating material.

석탄화도의 지표와 석탄조직성분과의 관계 (Relationship between maceral composition and some parameters indicating the degree of coalification)

  • 박홍수
    • 자원환경지질
    • /
    • 제32권1호
    • /
    • pp.83-91
    • /
    • 1999
  • Coal properties are controlled by the following two factors : One is the maceral components and the other is the degree of coalification. In other words, even if coals in question indicate the same degree of coalification, their chemical and physical properties considerably vary one another when their maceral components are different. It is well known that virtrinite reflectance is the best single criterion for the degree of coalification covering the whole range of coal rank. Some authors have recently insisted that sporinite fluorescence is more leliable coal rank parameter than vitrinite reflectance in case of low rank coals. In this paper, to examine the relince of sporinite fluorescence as coal rank parameter, fluidity analysis of coals is newly performed and the data are analyzed in comparision with those of virinite reflectance, sporinite fluorescence and maceral components. The results of this study are as follows; 1) Vitrinite reflectance becomes low when degradinite content is high within one columnar samples, and vice versa. 2) variation of vitrinite reflectance depend on degradinite content and on difference of roiginal plant. 3) In dealing with the Japanese paleogene coals, sporinite fluorescence is more reliable parameter indicating the degree of coalification than vitrinite reflectance. 4) Maximum fluidity increases exponetially in proportion to the increases of degradinite content.

  • PDF

선택적 레이저 용융 공정의 공정변수 평가를 위한 용융풀 유한요소 모델 (A Finite Element Model of Melt Pool for the Evaluation of Selective Laser Melting Process Parameters)

  • 이강현;윤군진
    • 한국군사과학기술학회지
    • /
    • 제23권3호
    • /
    • pp.195-203
    • /
    • 2020
  • Selective laser melting(SLM) is one of the powder bed fusion(PBF) processes, which enables quicker production of nearly fully dense metal parts with a complex geometry at a moderate cost. However, the process still lacks knowledge and the experimental evaluation of possible process parameter sets is costly. Thus, this study presents a finite element analysis model of the SLM process to predict the melt pool characteristics. The physical phenomena including the phase transformation and the degree of consolidation are considered in the model with the effective method to model the volume shrinkage and the evaporated material removal. The proposed model is used to predict the melt pool dimensions and validated with the experimental results from single track scanning process of Ti-6Al-4V. The analysis result agrees with the measured data with a reasonable accuracy and the result is then used to evaluated each of the process parameter set.

YIG 단결정 후막의 열처리의 효과 (Effect of Annealing for YIG Single Crystal Thick Films)

  • 김근영;윤석규;김용탁;이성문;윤대호
    • 한국세라믹학회지
    • /
    • 제40권9호
    • /
    • pp.855-858
    • /
    • 2003
  • Liquid Phase Epitaxy (LPE)법으로 Yttrium Iron Garnet (YIG:Y$_3$Fe$_{5}$O$_{12}$) 단결정 후막을 성장시킬 때 PbO계 응제에서는 Pb 이온이 성장되는 결정내로 혼입되어 성장된 막의 격자상수를 증가시키고, 일축 자기이방성 상수값(Ku)을 변화시키거나 전기 전도도를 변화시킨다. 또한 광 흡수율을 증가시키는 등의 성장된 막의 물성에 악영향을 미친다. 열처리 후 Pb 이온의 휘발로 인한 결정내의 농도감소로 성장된 단결정 후막의 격자상수가 평균 0.0115$\AA$ 감소하였다.

Nonlocal effects on propagation of waves in a generalized thermoelastic solid half space

  • Singh, Baljeet;Bijarnia, Rupender
    • Structural Engineering and Mechanics
    • /
    • 제77권4호
    • /
    • pp.473-479
    • /
    • 2021
  • The propagation of plane waves in a linear, homogeneous and isotropic nonlocal generalized thermoelastic solid medium is considered in the framework of Lord and Shulman generalization. The governing field equations are formulated and specialized in a plane. Plane wave solutions of governing equations show that there exists three plane waves, namely, P, thermal and SV waves which propagate with distinct speeds. Reflection of P and SV waves from thermally insulated or isothermal boundary of a half-space is considered. The relevant boundary conditions are applied at stress free boundary and a non-homogeneous system of three equations in reflection coefficients is obtained. For incidence of both P and SV waves, the expressions for energy ratios of reflected P, thermal and SV waves are also obtained. The speeds and energy ratios of reflected waves are computed for relevant physical constants of a thermoelastic material. The speeds of plane waves are plotted against nonlocal parameter and frequency. The energy ratios of reflected waves are also plotted against the angle of incidence of P wave at a thermally insulated stress-free surface. The effect of nonlocal parameter is shown graphically on the speeds and energy ratios of reflected waves.

Which Information is Commonly Used for Patients with Stroke at Rehabilitation Settings?

  • Lee, Haejung;Song, Jumin
    • The Journal of Korean Physical Therapy
    • /
    • 제27권6호
    • /
    • pp.392-399
    • /
    • 2015
  • Purpose: This study investigated whether the strength imbalance between two muscles can affect the score of EMG based biofeedback game, and whether the EMG based biofeedback game score can be used as predictable indicator of the degree of muscle balance alternating the conventional strength measuring equipment. Methods: 40 participated in this study. Biodex was used to measure the peak torque/weight in order to calculate the muscle strength balance index between plantar flexor and dorsiflexor of ankle joint. And muscle balance index (MBI) was calculated. The EMG biofeedback game scores of dorsiflexor and plantar flexor were acquired, so that the EMG electrodes were attached at tibialis anterior and gastrocnemius. The relationship between the game score and the muscle balance index were analyzed. Results: There was negative correlation between the muscle balance index between plantar flexor and dorsiflexor and the peak torque/weight of plantar flexor (r=-0.70). And there was negative correlation between the muscle balance index between plantar flexor and dorsiflexor and the game score of plantar flexor (r=-0.83). Conclusion: The EMG biofeedback game score had significant relationship with muscle imbalance at ankle joint, so it seems that the game score can be used for predicting the degree of muscle imbalance as a parameter.