• 한국식품조리과학회지
• /
• 제24권4호
• /
• pp.473-479
• /
• 2008

The principal objective of this study was to evaluate the sensory properties and physical characteristics of muffins produced using different fats(butter, grape seed oil) and mixing methods(Creaming method, Foam method, Single-stage method). The muffins weighed between $63.25{\sim}64.50$ g and were $5.77{\sim}6.42$ cm in height. In a texture analyzer test, muffins prepared via the single-stage method with butter evidenced the highest hardness, gumminess, and chewiness values among the five kinds of muffin prepared in these experiments. The springiness value was highest in the muffin prepared via the foam method with grape seed oil. In the sensory evaluation, we detected no significant differences among the muffins in terms of flavor($4.76{\sim}5.24$), taste($4.65{\sim}5.29$), softness ($4.65{\sim}5.41$), and overall acceptability ($4.47{\sim}5.29$). In the chemical composition analysis, moisture and crude protein contents were found to be higher in the control group(p<0.05) than in the muffin prepared via the foam method with grape seed oil(p<0.01). We noted no significant differences among the muffins in terms of crude lipids or crude ash content.

• Structural Engineering and Mechanics
• /
• 제88권3호
• /
• pp.239-249
• /
• 2023

The Radial Point Interpolation Method (RPIM) has been proposed to overcome the difficulties associated with the use of the Radial Basis Functions (RBFs). The RPIM has the following properties: Simple implementation in terms of boundary conditions as in the Finite Element Method (FEM). A less expensive CPU time compared to other collocation meshless methods such as the Moving Least Square (MLS) collocation method. In this work, we propose an adaptive high-order numerical algorithm based on RPIM to simulate the thermoviscoplastic behavior of a material mixing observed in the Friction Stir Welding (FSW) process. The proposed adaptive meshfree RPIM algorithm adapts well to the geometric and physical data by choosing a good shape parameter with a good precision. Our numerical approach combines the RPIM and the Asymptotic Numerical Method (ANM). A numerical procedure is also proposed in this work to automatically determine an improved shape parameter for the RBFs. The efficiency of the proposed algorithm is analyzed in comparison with an iterative algorithm.

• Elastomers and Composites
• /
• 제29권2호
• /
• pp.121-130
• /
• 1994

The physical properties of rubber blend between natural rubber(NR) and ethylene propylene diene terpolymer(EPDM) were investigated as a study of EPDM composite materials. For EPDM/NR blends, the effects of ethylene and diene contents in EPDM, blend ratio, dicumyl peroxide(DCP) curing system on the physical properties, interfacial adhesion force and dynamic crack growth etc. were studied. EPDM/NR blends loaded with carbon black were prepared by mechanical mixing and cured by plate heating cure press. Crosslinking density was measured by swelling method with toluene. The physical properties of all blends were measured with Instron, fatigue to failure(FTF), Demattia flex cracking tester(DMFC), scanning electron microscopy (SEM), etc. As the ethylene and diene contents in EPDM increased, the physical properties, such as dynamic crack growth, adhesion to other component were increased too. Interfacial adhesion force of EPDM/NR blends to dissimilar layer was improved by the use of optimum peroxide curing system.

• 헤리티지:역사와 과학
• /
• 제53권1호
• /
• pp.34-51
• /
• 2020

성남 고등동 회곽묘는 한 지역에서 다른 시기에 제작된 6기의 회곽묘가 발굴되었으며, 회곽묘 조성에 사용된 삼물회의 다양한 제작 기법이 확인되었다. 삼물회의 제작 기법을 규명하기 위하여 고문헌 기록을 바탕으로 석회 원료와 제작 기법 및 배합 방법을 고찰하였다. 조선시대 고문헌에는 석회의 원료 중 저품위 석회석을 사용한 기록과 배합 재료로 황토와 백토, 기와 가루 등과 같은 석회의 강도를 향상시킬 수 있는 포졸란 물질 사용에 대한 기록이 남아있다. 또한 삼물회의 다양한 배합 방법이 기록되어 있어 이에 대한 재현 실험을 바탕으로 석회 원료, 배합 재료, 배합 비율에 따른 삼물회 제작 기법 분석이 요구되었다. 조선시대 전기에는 석회를 다방면으로 사용하였으나 공급이 적고 기술적인 미숙함으로 지속적인 문제가 발생하였으며, 조선시대 후기에 이르러 대량 생산됨과 함께 석회 제작 기술이 발달하였다. 16세기와 18세기 회곽묘 삼물회의 제작 기법 분석을 바탕으로 고문헌에 기록된 배합비와 배합 방법들이 적용된 것을 알 수 있었으며, 회곽묘 삼물회는 시기에 따라 석회의 품질이 변화하였고 배합 재료 또한 변화됨에 따라 배합 비율이 다르게 나타나는 것으로 판단된다. 회곽묘 삼물회의 배합 비율은 시기에 따라서 변화하였으며, 주례와 가례를 기준으로 정해진 배합 방법으로 제작되었기 때문에 회곽묘 삼물회의 제작 기법에 대한 과학적 분석 자료가 지속적으로 구축된다면 회곽묘 편년 연구에 도움이 될 것으로 기대된다.

• 대한기계학회논문집B
• /
• 제22권11호
• /
• pp.1571-1581
• /
• 1998

A flow visualization study was carried out for the branch pipe mixing flow in which a jet was issued normally to the fully developed pipe flow. An instantaneous laser tomographic method was used for cross flow Reynolds numbers based on the cross flow diameter D ranged $Re_{cf}=5.26{\times}10^3{\sim}1.13{\times}10^4$, diameter ratios d/D = 0.1 ~ 0.2 and velocity ratios R = 0.5 ~ 10. Oil mist with the size of about $10{\mu}m$ diameter was used for the scattering particle. The main purpose of this study was to reveal the physical mechanism and the structure of vortices formation with varying the velocity ratios and diameter ratios in the branch pipe flow. It was found that the physical mechanism and the structures of vortices formation were quite different depending on the velocity ratios. Particularly in the case of R < 1, the typical vortex shows single loop shape and that for the case of R > 1 depicts mushroom-like structure in the cross flow jet.

• 보존과학회지
• /
• 제36권4호
• /
• pp.284-295
• /
• 2020

This study focuses on reinforcement agents for wall damage, such as cracks, breakage, or delamination, for mural paintings from the Payathonzu temple. Experiments were conducted with filling and grouting agents based on the reinforcing method. In the filling reinforcement experiment, different mixing ratios of lime to sand, and additives (jaggery, seaweed glue, and Primal SF-016) were used. In the grouting reinforcement experiment, the mixing ratio of lime and pozzolan was the same, and the additive types were identical to the filling reinforcement experiment. The filling reinforcement experiment showed that there were fewer physical changes such as contraction, with a greater mixing ratio of lime to sand, however, the compressive strength decreased as the mixing ratio increased. With additives, the change in volume of agent decreased and the compressive strength increased, which was especially prominent for jaggery and Primal SF-016. The grouting reinforcement experiment showed that there was a remarkable contraction with an increased amount of moisture that originates from the characteristic of grouting agents that requires flowability. With additives, the water content of the agent decreased, whereas the compressive strength and adhesion increased. Among the additives, Primal SF-016 exhibited the highest compressive strength, and seaweed glue exhibited the most considerable viscosity and adhesion. The study results showed that the characteristics of reinforcement agents vary according to the mixing ratio and additives of the filling and grouting agents. Therefore, it is necessary to selectively apply the mixing ratio and additives for different reinforcement agents considering the wall damage for conservation treatments.

• Elastomers and Composites
• /
• 제50권2호
• /
• pp.132-137
• /
• 2015

A self actuated photocatalyst $Weltouch^{(R)}$ used to the remove the odor gases generated in the foaming process of shoes insole was prepared by sol-gel method and studied its property. Specially, with mixing $Weltouch^{(R)}$ in the foaming process of shoes insole, the physical functionality such as specific gravity, hardness, elongation, compression set was studied. The physical functionality of shoes insole was no variation by added $Weltouch^{(R)}$. The odor gases generated in the foaming process of shoes insole was detected to be reduced to 60~80% by self actuated photocataylst $Weltouch^{(R)}$ even in the dark conditions, which was observed for both anatase and rutile phase.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 춘계종합학술대회
• /
• pp.135-138
• /
• 2007

누구나 한번쯤은 스트레스란 말을 사용해본 경험이 있을 것이다. 왜냐면 살아가는 동안 주변의 여러 가지 정신적 육체적 압박, 갈등, 좌절, 결핍 등이 발생하기 때문이다. 그만큼 스트레스는 우리 주변에 언제나 존재하고 있다. 현재 대부분의 스트레스 측정방식은 심리적 방법과 생체적 방법으로 이루어져 있는데, 주관성, 객관성, 그리고 과학성의 불균형으로 스트레스 정도의 정확성이 부족하다. 따라서 본 논문에서는 심리적 측정결과와 생체적 측정결과를 혼합해서 지수화 하여 보다 스트레스 완화에 도움이 되기 위한 지수 처리 알고리즘을 제안한다.

• Carbon letters
• /
• 제10권4호
• /
• pp.320-324
• /
• 2009

We investigated the effect of diameter and content of carbon nanotubes (CNTs) on the physical properties of styrenebutadiene rubber (SBR)/CNTs nanocomposites. CNTs-reinforced SBR nanocomposites were prepared by the melt mixing process. CNTs with different diameters were synthesized by the chemical vapor deposition method (CVD). In this work, the mechanical property and other physical properties of SBR/CNTS nanocomposites were discussed as a function of the content and diameter of CNTs.

• Journal of the Korean Wood Science and Technology
• /
• 제26권1호
• /
• pp.76-86
• /
• 1998

Effects of processing variables and MAPP (maleic anhydride polypropylene) coupling agent on the properties of composite were discussed for turbulent-air-mixed woodfiber-polypropylenefiber composites. In this research, density, composition ratio, and mat moisture content were established as processing variables, and emulsified MAPP prepared by direct pressure method was incorporated as the coupling agent. And the turbulent air mixer, which was improved in function through alteration of our previous fiber mixer, was used to mix wood fibers and polypropylene fibers. At the addition level of 1% MAPP, based on oven-dried wood fiber weight, woodfiber-polypropylenefiber composites generally showed enhanced the physical and mechanical properties. And composites with low to medium densities of 0.6 to 0.8g/$cm^3$ greatly increased in these property values than with high densities of 1.0g/$cm^3$ or more by adding 1 % MAPP. Thus, MAPP addition was thought to be an effective way of enhancing properties for nonwoven web composites. At the mat moisture contents of 5 to 20%, however, the physical and mechanical properties were not enhanced by adding 1% MAPP. In the composites containing 15% polypropylene fibers, the lowest thickness swelling and water absorption values were observed at the 1% MAPP level. The addition of more than 1% MAPP had the adverse effect on the physical and mechanical properties of composites.