• 한국염색가공학회지
• /
• 제14권6호
• /
• pp.335-341
• /
• 2002

The physical properties and the dyeability of the nylon S fibers Prepared by high speed spinning according to godet roller draw ratio form 1.1 to 1.6 were investigated. The strains of nylon 6 fibers were decreased against the increase of the godet roller draw ratio. The stresses of nylon 6 fibers were increased with the increase of the godet roller draw ratio. Birefringences, densities and crystallinities of the nylon 6 fibers were increased with the increase of godet roller draw ratio In DSC diagrams, the $\gamma$ form of crystal became dominant at higher godet roller draw ratio. The dye uptakes of C. 1. Acid Blue 113 on the fibers were decreased against the increase of godet roller draw ratio.

• 한국실내디자인학회논문집
• /
• 제20권4호
• /
• pp.63-73
• /
• 2011

In the middle of that a information form is being formlessly changed to diverse deirections, a design and a space as physical consequence show not only a allegory but mutually relational charicteristic meaning a nonboundary and nonlinear form by development of modem digital culture. Following development of the modern digital culture, a design and space which are physical results, show a point of correlative specificity, allegory, nonlinear and nonboundary, Not only a design and culture but also various circles handle a hypertext as a representative pivot in this change. this has same contexts as rhizome possessing a asignifiante and nomadic characteristic said by Felix Guattari and Gilles Deleuze. An ideal of rhizome space shows historical decisions, unexpected accidents, a concepts, an individual. a group, social compositions above an contrifugal exterior force, This study examines into surroundings designed by a hypertext and rhizome through a case accordingly and infers an ultramodern characteristic in conventional precognition with synthesizing a peculiarity of the digital generation space.

• 한국지역사회생활과학회지
• /
• 제28권2호
• /
• pp.257-271
• /
• 2017

The purpose of this study was to suggest basic data for prevention of child abuse by examining the patterns and characteristics of child abuse observed at child-care centers. Data was collected by pre-service early childhood teachers majoring in child studies in an education practice session from May 1 to May 31, 2015 based on examined information and class discussion. This study shows that emotional abuse was performed most often, followed by neglect and physical abuse. Physical abuse was observed as a form of punishment and beating, whereas emotional abuse was observed in the form of force, sarcastic remarks, verbal attacks, and disregard. Neglect was observed as exclusion and indifference. Most crucial prevention against child abuse lies in teachers' personality education and concerns with their own mental health as well as children's rights education.

• 복식문화연구
• /
• 제18권4호
• /
• pp.687-702
• /
• 2010

The purpose of this study is to study the inner meaning and formative with distorted and atypical Informel image, body image expressed in modern fashion. Method of the study is as follow. The study method examined philosophy of art 19th century?in order to consider interconnections between social and cultural characteristics of expressionistic abstract art, a form of Informel and changed physical style. Based on this method, the Informel image that appeared in the plastic arts in terms of artistic significance and aesthetic value was examined. Based on the above discussion on modern fashion Informel images were expressed in any formative characteristics were considered. The results of this study are as follows. Contingencies through the spontaneous act of art to transcend the image of atypical lines formed elements of coincidence, was developed. Liberation was expressed from liberation of physical boundaries and created outward expansion of the free formative. Atypical was organic forms pursuing spontaneous plasticity and diversity, and appeared in the form of distortion and deformation.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제1권2호
• /
• pp.89-94
• /
• 2009

The current focus of development in industrial Computational Fluid Dynamics (CFD) is integration of CFD into Computer-Aided product development, geometrical optimisation, robust design and similar. On the other hand, in CFD research aims to extend the boundaries of practical engineering use in "non-traditional" areas. Requirements of computational flexibility and code integration are contradictory: a change of coding paradigm, with object orientation, library components, equation mimicking is proposed as a way forward. This paper describes OpenFOAM, a C++ object oriented library for Computational Continuum Mechanics (CCM) developed by the author. Efficient and flexible implementation of complex physical models is achieved by mimicking the form of partial differential equation in software, with code functionality provided in library form. Open Source deployment and development model allows the user to achieve desired versatility in physical modeling without the sacrifice of complex geometry support and execution efficiency.

• 한국기계연구소 소보
• /
• 통권13호
• /
• pp.27-43
• /
• 1984

In order to obtain the high resilience, low compression set and less of hardness change in the wiper blade rubber, vulcanization system and receipes must be controlled. To improve the above the above Physical properties, the system should be taken as follows. i) peroxide vulcanization system and sulfur vulcanization system. ii) rubber having more cis-form than trans-form. iii) moderate particle size cabon black. v) usage of other improvement agent. The rubber blade with 4.4% compression set, 76% resilience, Hs 0 $\pm$ 2 hardness change could be abtained through vulcanization system, In addition, the surface of wiper blade must be treated by chemically and physically to minimize for the skid and friction.

• Journal of Pharmaceutical Investigation
• /
• 제41권2호
• /
• pp.75-82
• /
• 2011

LB71350 is an HIV protease inhibitor with poor aqueous solubility and extensive first pass effect. The purpose of the present study was to test the feasibility of solid dosage form of LB71350 with improved bioavailability utilizing solid dispersion. Three different compositions with varying ratio of (LB71350: Gelucire 44/14: Tween 20) were studied. Capsule filling of these solid dispersion compositions was tested using a semi-automatic capsule filling system. Oral bioavailability in dog was tested. Chemical and physical stability at 4, 25 and $40^{\circ}C$ was monitored by HPLC assay, dissolution test, powder XRD and microscopy. The capsule filling system yielded uniform products of drug loading up to 10%. Oral bioavailability in dog was improved compared to the aqueous suspension of crystalline LB71350. Capsules were chemically stable for up to 6 months at $40^{\circ}C$. However, there were temperature and composition dependent physical changes. Decrease in dissolution rates after storage at $40^{\circ}C$ was due to the polymorphic change. In conclusion, manufacturing process, bioavailability, and physico-chemical stability have been considered to propose a solid dispersion capsule formulation for the HIV protease inhibitor with poor physico-chemical properties. A new less soluble crystalline form identified during the physical stability test warrants further study.

• 아동학회지
• /
• 제26권6호
• /
• pp.73-88
• /
• 2005

This study aimed to develop a reliable and valid developmental test for toddlers and preschoolers. A trial form of the test with 230 items in 5 domains(cognitive, physical, language, social, and self-help) was constructed and administered to 200 children from 2 to 5-year-olds. Item analysis indicated that most items selected in cognitive, physical, and indicated domain were acceptable in terms of item response rate and item discrimination. However, some items in social and self-help domain did not show clear age trends in item response, but mostly were adequate in item discrimination. Based on item analysis, 112 items were selected for the final form : 24 items each for the cognitive, physical, and language domain; 20 items each for the social and self-help domain. Reliability indicated by internal consistency coefficients(KR-20) were high in all domains. Validity of the test was supported by inter-correlations among 5 domains(.61 to .93), and significant age differences in domain scores.

• 한국실내디자인학회논문집
• /
• 제14권3호
• /
• pp.139-146
• /
• 2005

This paper focuses on the response of architectural form to the technological characteristics in the institute facilities. For this, we study the meaning of technology in the aspect of physical, formal and social concepts and their architectural expression and sort by grouping through analyzing 27 cases of foreign current Institute facilities. Conclusions can be summarized as followings: 1) Vocabulary of technology in physical concept is presented by the environmental control through the experimental surface such as louver and glazing and the independent exposed equipment. 2) Vocabulary of technology in physical concept is presented using the machine like aesthetics by exposing the structural members and designing the exterior form using dynamical images. 3) The expression of social meaning in technology is presented by standardization, parts assembling through mass production system, the unit material for expression of today's industrial society. The expressions of technological language in the institute facilities are used not only one vocabulary but comprehensive ones.

• Archives of Pharmacal Research
• /
• 제2권1호
• /
• pp.49-64
• /
• 1979

In an atempt to elucidate further physicochemical properties of furosemide-PVP coprecipitates, extensive investigations such as TLC, UV,IR, NMR, X-ray diffraction, TGA and DTA studies were carried out for the furosemide test systems. X-ray diffraction studies revealed that the pure furosemide and the furosemide contained within a physical mixture were crystalline in nature. However, there was no crystallinity evident in the 1:5 furosemide-PVP 40,000 coprecipitate system, even after standing for two years. The various ratio furosemide-PVP 40,000 coprecipitate systems revealed that the coprecipitate containing a greater amount of PVP 40,000 than that of furosemide showed a crystalline state of furosemide and that the minimum amounts of PVP to make amorphous form of furosemide was 1:1 ratio of furosemide to PVP. From the furosemide-PVP coprecipitate systems with PVP of different molecular weights of 10,000, 40,000 and 360,000, all the 1:1 ratio coprecipitates did not exhibit any crystallinity of furosemide, whereas all the 2:1 ratio coprecipitates showed a presence of crystalline furosemide. All the coprecipitated preparations with PEG 4,000 and with PEG 6,000 showed the diffraction peaks indicating the presence of crystalline furosemide. The comparison of infrared spectra of the physical mixture and the coprecipitate showed an interaction such as association between the functional groups of furosemide and PVP in the molecular level, whereas the studies by TLC, UV and NMR showed its dissociation in methanol solution. The weight losses in TGA curves showed all the same patterns. However, a little different transition form in DTA thermograms was shown between the physical mixture and the coprecipitate, indicating the different thermal property.