• Journal of Communications and Networks
• /
• v.11 no.5
• /
• pp.480-488
• /
• 2009

Cooperative transmission is an effective solution to improve the performance of wireless communications over fading channels without the need for physical co-located antenna arrays. In this paper, selection combining is used at the destination instead of maximal ratio combing to optimize the structure of destination and to reduce power consumption in selective decode-and-forward relaying networks. For an arbitrary number of relays, an exact and closed-form expression of the bit error rate (BER) is derived for M-PAM, M-QAM, and M-PSK, respectively, in both independent identically distributed and independent but not identically distributed Rayleigh fading channels. A variety of simulations are performed and show that they match exactly with analytic ones. In addition, our results show that the optimum number of relays depend not only on channel conditions (operating SNRs) but also on modulation schemes which to be used.

• Nuclear Engineering and Technology
• /
• v.30 no.3
• /
• pp.235-244
• /
• 1998

The parametric model method determines the accident source term which is Presented by a set of source term parameters. In this method, the cumulative distribution of each source term parameter should be derived for its uncertainty analysis. This paper introduces a method of generating the parameters in the form of cumulative distribution using MAAP version 4.0. In MAAP, there are model parameters which could incorporate uncertain physical and/or chemical phenomena. In general, the model parameters do not have a point value but a range. In this paper, considering that, the input values of model parameters influencing each parameter are sampled using LHS. Then, the computation results are shown in cumulative distribution form. For a case study, the CDFs of FCOR and WES of Kori Unit 1 are derived. The target scenarios for the computation are the ones whose initial events are large LOCA, small LOCA and transient, respectively. It is found that the computed CDF's in this study are consistent to those of NUREG-1150 and the use of MAAP is proven to be adequate in assessing the parameters of the severe accident source term.

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.3
• /
• pp.141-149
• /
• 2003

The ship STEP is an international standard for the computer-interpretable representation of ship product information and for the exchange of ship product model data. The ship STEP consists of several APs(Application Protocol), such as AP215(ship arrangement), AP216(ship moulded form), AP218(ship structures), AP226(ship mechanical systems), and AP234(operating logs, records, message). The STEP AP216(ISO 10303) are an application protocol for the exchange of ship arrangement and ship moulded forms. The AP216 specifies the geometric shape and the hydrostatic properties of the ship moulded form. This paper introduces the state-of-the-art of ship STEP AP216 and develops the test case for the validation of data structure of AP216.

• Nuclear Engineering and Technology
• /
• v.49 no.8
• /
• pp.1680-1688
• /
• 2017

In this study, analysis is performed on entropy generation during cilia transport of water based titanium dioxide nanoparticles in the presence of viscous dissipation. Moreover, thermal heat flux is considered at the surface of a channel with ciliated walls. Mathematical formulation is constructed in the form of nonlinear partial differential equations. Making use of suitable variables, the set of partial differential equations is reduced to coupled nonlinear ordinary differential equations. Closed form exact solutions are obtained for velocity, temperature, and pressure gradient. Graphical illustrations for emerging flow parameters, such as Hartmann number (Ha), Brinkmann number (Br), radiation parameter (Rn), and flow rate, have been prepared in order to capture the physical behavior of these parameters. The main goal (i.e., the minimizing of entropy generation) of the second law of thermodynamics can be achieved by decreasing the magnitude of Br, Ha and ${\Lambda}$ parameters.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.2
• /
• pp.1-10
• /
• 2003

It is important to understand the flow characteristics such as wave and wake development around a ship for the design of the hull forms with better resistance and propulsive performance. The experimental results explicating the local flow characteristics are also invaluable for validation of the physical and numerical modeling of CFD codes, which are recently gaining acknowledgements as efficient tools for hull form evaluation This paper describes velocity and wave profiles measured in the towing tank for the KRISO 138K LNG Carrier (KLNG) model with propeller and rudder. The results contained in this paper can provide the valuable information on the effect of propeller and rudder on stern flow characteristics of the modern commercial hull form, furthermore, the present experimental data will provide important database for CFO validation.

• Journal of The Korean Astronomical Society
• /
• v.14 no.2
• /
• pp.89-93
• /
• 1981

Weibull analyses given to the initial mass function (IMF) deduced by Miller and Scalo (1979) have shown that the mass dependence of IMF is an exp$[-{\alpha}m]$- form in low mass range while in the high mass range it assumes an exp$[-{\alpha}\sqrt{m}]/\sqrt{m}$-form with the break-up being at about the solar mass. Various astrophysical reasonings are given for identifying the exp$[-{\alpha}m]$ and exp$[-{\alpha}\sqrt{m}]/\sqrt{m}$ with halo and disk star characteristics, respectively. The physical conditions during the halo formation were such that low mass stars were preferentially formed and those in the disk high mass stars favoured. The two component nature of IMF is in general accord with the dichotomies in various stellar properties.

• Journal of electromagnetic engineering and science
• /
• v.16 no.2
• /
• pp.126-133
• /
• 2016

Wireless power transfer (WPT) efficiencies for multiple-input multiple-output (MIMO) systems are formulated with a goal of achieving their maximums using Z matrices. The maximum efficiencies for any arbitrarily given configurations are obtained using optimum loads, which can be determined numerically through adequate optimization procedures in general. For some simpler special cases (single-input single-output, single-input multiple-output, and multiple-input single-output) of the MIMO systems, the efficiencies and optimum loads to maximize them can be obtained using closed-form expressions. These closed-form solutions give us more physical insight into the given WPT problem. These efficiencies are evaluated theoretically based on the presented formulation and also verified with comparisons with circuit- and EM-simulation results. They are shown to lead to a good agreement. This work may be useful for construction of the wireless Internet of Things, especially employed with energy autonomy.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.21 no.2
• /
• pp.8-16
• /
• 1993

The purpose of this paper is to analyze the linguistic origin of the species manes of landscape plants in order to help students understand the physical characteristics of the plants through the botanical names. This study includes the plants that are possible to use as landscape material as well as both the native and foreign plants that are already used. Name of Species of Scientific name in Landscape plant be derived from region or nations of habitat, botanist, plant explors, and their sponser, and plant form and number of leaves or flowers, character or ingredient of plants and shape of stem, tree crown form. In this paper, about 300 species(contains varieties, formas) are interpreted into etymological meanings.

• Korean Journal of Pharmacognosy
• /
• v.29 no.1
• /
• pp.35-39
• /
• 1998

The famous prescription of So Cheong Ryong Tang (小靑龍湯)in Chinese herb medicine, which has been used for the treatment of common cold, influenza, asthmatic bronchitis, and bronchial asthma and, is being commercially produced in the form of decoction. However, the storage problem for this dosage form remains unsettled. The quantitative changes of the major constituents, at different temperature and time course, were examined employing HPLC and GC. Cinnamaldehyde, cinnamic acid, ephedrine, albiflorine, paeoniflorin, benzoic acid, glycyrrhizin, and liquiritin were choosen as phytochemical markers. The content of cinnamaidehyde significantly decreased when stored at increased temperature, while that of benzoic acid has increased. By overall consideration of the present experimental data, it was suggested that most constituents are considerably stable when preserved below freezing temperature.

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1185-1189
• /
• 2018

Thickness-dependent magnetic domain structure of ultrathin Co wedge films (0.3 nm-1.0 nm) sandwiched by Pt layers was investigated by scanning transmission x-ray microscopy (STXM) employing X-ray magnetic circular dichroism (XMCD), utilizing elliptically polarized soft x-rays and electromagnetic fields, with a spatial resolution of 50 nm. The magnetic domain images measured at the Co $L_3$ edge showed the evolution of the magnetic domain structures from maze-like form to the bubble-like form as the perpendicular magnetic field was applied. The asymmetric domain expansion of a 500 nm-scale bubble domain was also measured when the in-plane and perpendicular external magnetic field were applied simultaneously.