• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2901-2906
• /
• 2007

A solver for icing and condensation of water has been developed. The phase change process was solved by the enthalpy method. For the code validation, the temperature and the phase change from water to ice of the driven cavity were calculated. Also, the melting process of the frost on the windshield glass of an automobile has been simulated. The calculation showed a good agreement with analytical solution and other numerical results. Using the present validated code, the condensation of water vapor has been first tried. The computed results provided some physical features of condensation phenomena even though experimental data and other numerical data were not available. For future work, it is recommended to throughly investigate the effects of boundary conditions on the solution.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2890-2895
• /
• 2007

Heat transfer on two identical nearby circular cylinders immersed in the uniform cross flow at Re = 100 and Pr = 7.0 was numerically studied. We consider all possible arrangements of the two circular cylinders in terms of the distance between the two cylinders and the inclination angle with respect to the direction of the main flow. It turns out that significant changes in the characteristics of heat transfer are noticed depending on how the two circular cylinders are positioned, resulting in quantitative changes of heat transfer coefficients on both cylinders. Collecting all the numerical results obtained, we propose a contour diagram for averaged Nusselt number for each of the two cylinders. The perfect geometrical symmetry implied in the flow configuration allows one to use those diagrams to estimate heat transfer rates on two identical circular cylinders arbitrarily positioned in physical space with respect to the main flow direction.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2851-2856
• /
• 2007

Flow patterns in the presence of two identical nearby circular cylinders at =100 were numerically studied. We considered all possible arrangements of the two circular cylinders in terms of the distance between the two cylinders and the inclination angle with respect to the direction of the main flow. Eight distinct flow patterns were identified based on vorticity contours and streamlines, which are Base-Bleed, Biased-Base-Bleed, Shear- Layer-Reattachment, Induced-Separation, Vortex-Impingement, Flip-Flopping, Modulated Periodic, and Synchronized-Vortex-Shedding. Collecting all the numerical results, we propose a general flow pattern diagram for flows past the two cylinders. The perfect geometrical symmetry implied in the flow configuration allows one to use this diagram to distinguish flow patterns in the presence of two identical circular cylinders arbitrarily positioned in physical space with respect to the main flow direction.

• Journal of computational fluids engineering
• /
• v.13 no.2
• /
• pp.42-47
• /
• 2008

Heat transfer on two identical nearby circular cylinders immersed in the uniform cross flow at Re=120 and Pr=0.7 was numerically studied. We consider all possible types of arrangements of the two circular cylinders in terms of the distance between the two cylinders and the inclination angle with respect to the direction of the main flow. It turns out that significant changes in the characteristics of heat transfer are noticed depending on how the two circular cylinders are positioned, resulting in quantitative changes of heat transfer coefficients on both cylinders. Collecting all the numerical results obtained, we propose a contour diagram for averaged Nusselt number for each of the two cylinders. The perfect geometrical symmetry implied in the flow configuration allows one to use those diagrams to estimate heat transfer rates on two identical circular cylinders arbitrarily positioned in physical space with respect to the main flow direction.

• Structural Engineering and Mechanics
• /
• v.48 no.4
• /
• pp.519-545
• /
• 2013

An outline of the Timoshenko beam theory is presented. Two differential equations of motion in terms of deflection and rotation are comprised into single equation with deflection and analytical solutions of natural vibrations for different boundary conditions are given. Double frequency phenomenon for simply supported beam is investigated. The Timoshenko beam theory is modified by decomposition of total deflection into pure bending deflection and shear deflection, and total rotation into bending rotation and axial shear angle. The governing equations are condensed into two independent equations of motion, one for flexural and another for axial shear vibrations. Flexural vibrations of a simply supported, clamped and free beam are analysed by both theories and the same natural frequencies are obtained. That fact is proved in an analytical way. Axial shear vibrations are analogous to stretching vibrations on an axial elastic support, resulting in an additional response spectrum, as a novelty. Relationship between parameters in beam response functions of all type of vibrations is analysed.

• Proceedings of the ESK Conference
• /
• 1998.04a
• /
• pp.13.1-18
• /
• 1998

IVNS(In-Vehicle Navigation System) which developed by the advance of technological system including computer, display and communication will procide the important interface functions between the driver and the ITS (Intelligent Transport System). However, hat the human factors engineer can actually offer to the designer is by no means a complete set of design specifications. Therefore, a set of boundary conditions and operational ranges within which the designer can be assured that physical, perceptual and cognitive abilities and limitations of drivers will be accommodated system atically[6]. Also, this will be the considerations to compose the IVNS HMI (Human-Machine Interface) design guidelines and IVNS HMI evaluation system. As the first phase of developing the IVNS HMI evaluation system, this paper describe the architecture and the content of this system.

• ETRI Journal
• /
• v.30 no.1
• /
• pp.152-154
• /
• 2008

We present a simple and efficient technique for a plausible elastic deformation of three-dimensional objects. An elastic sweep surface is constructed by interpolating key cross sections with positions, orientations, and boundary shapes determined by physical simulation of simple mass-spring systems. The deformable parts of an object are approximated by the elastic sweep surfaces, and the vertices of the deformable parts are bound to nearby sweep surfaces. As an external force is applied, the corresponding parts of an object change their shapes elastically. We demonstrate the effectiveness of our technique and show its real-time performance on mesh objects.

• Computers and Concrete
• /
• v.19 no.6
• /
• pp.701-710
• /
• 2017

In this study, the thermoelastic beam in modified couple stress theory due to laser source and heat flux is investigated. The beam are heated by a non-Guassian laser pulse and heat flux. The Euler Bernoulli beam theory and the Laplace transform technique are applied to solve the basic equations for coupled thermoelasticity. The simply-supported and isothermal boundary conditions are assumed for both ends of the beam. A general algorithm of the inverse Laplace transform is developed. The analytical results have been numerically analyzed with the help of MATLAB software. The numerically computed results for lateral deflection, thermal moment and axial stress due to laser source and heat flux have been presented graphically. Some comparisons have been shown in figures to estimate the effects of couple stress on the physical quantities. A particular case of interest is also derived. The study of laser-pulse find many applications in the field of biomedical, imaging processing, material processing and medicine with regard to diagnostics and therapy.

• Earthquakes and Structures
• /
• v.10 no.2
• /
• pp.451-461
• /
• 2016

A new first-order shear deformation theory is developed for dynamic behavior of functionally graded beams. The equations governing the axial and transverse deformations of functionally graded plates are derived based on the present first-order shear deformation plate theory and the physical neutral surface concept. There is no stretching-bending coupling effect in the neutral surface based formulation, and consequently, the governing equations and boundary conditions of functionally graded beams based on neutral surface have the simple forms as those of isotropic plates. The accuracy of the present solutions is verified by comparing the obtained results with the existing solutions.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.450-455
• /
• 2001

An analytical study is made of transient adjustment process of an initially stationary, stably-stratified fluid in a square. The boundary walls are highly-conducting. The overall Rayleigh number $R_a$ is large. Considerations are given to both opposing (${\delta}w/{\delta}T>0$) and cooperating (${\delta}w/{\delta}T<0$) configurations. The flow character in opposing configuration can be classified into (a) a forced-convection dominaut mode (${\delta}w/{\delta}T>1/\sqrt{2}$), (b) a buoyancy-convection dominant mode ($0<{\delta}w/{\delta}T<1/\sqrt{2}$), and (c) a static mode (${\delta}w/{\delta}T{\cong}1/\sqrt{2}$). Global evolutionary processes are depicted. and physical rationalizations are provided.