• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.181-182
• /
• 2016

본 논문은 최대전력점 추종 제어기법의 성능 개선을 위한 독립형 태양광 발전시스템의 하이브리드 기법을 제안한다. 하나의 기법만을 사용하는 경우, 일사량 및 온도 조건에 따라 비선형적 출력특성을 갖는 태양전지의 최대출력점을 효율적으로 추종하기 어렵다. 제안한 방법은 가변 스텝 사이즈를 적용한 Perturb and Observe (P&O) 기법으로 과도상태의 추종성능을 보장하고, Incremental Conductance (InC) 기법으로 정상상태의 자려진동을 감소시켜 출력 전력의 효율을 높일 수 있다. 1.4kW 태양광 발전시스템을 모의하여 수행된 PSIM 시뮬레이션 결과로 제안한 알고리즘의 타당성을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1041_1042
• /
• 2009

본 논문에서는 연료전지 태양광 복합발전시스템의 2가지 전력제어 알고리즘을 제안하고 각각의 성능을 비교 분석하였다. 태양광의 MPPT제어 위치에 따라 2가지 전력제어 알고리즘이 적용되었으며 각 알고리즘에 따른 MPPT성능, DC link 안정성과 출력전력 특성이 비교 분석되었으며 시뮬레이션 및 실험을 통해 타당성을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.358-359
• /
• 2018

본 논문에서는 태양광 시스템에서 전 범위 전력점을 추종하기 위한 Constant Power Generation (CPG) 알고리즘을 구현하였다. 기존의 최대 전력점 추종 (MPPT) 알고리즘은 고출력의 태양광 시스템을 위해 광범위하게 사용되고 있지만, 변화하는 계통상황에 대한 유연한 제어가 불가능하다. 구현한 알고리즘은 MPPT 제어를 수행하면서도 상황에 따라 원하는 전력을 출력할 수 있다. 전 범위의 전력점 추종이 가능한 계통 연계 태양광 컨버터를 구성하였으며 CPG 알고리즘의 두 가지 기법을 소개하였다. 시뮬레이션을 통해 두 CPG 알고리즘을 구현하고 그 성능을 비교 및 분석하였다.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.639-643
• /
• 2001

Recently, photovoltaic system has been studied widely as a renewable energy system, because it does not produce environmental pollution and it has infinity energy source from the sun. A study on photovoltaic system has a lot of problems like as reappearance and repetition of some situation in the laboratory experiment for development of MPPT algorithm and islanding detection algorithm, because output characteristics of solar cell are varied by irradiation and surface temperature of solar cell. And this system is consisted a lot of solar cell unit. Therefore, the assistant equipment which emulates the solar cell characteristics which can be controlled arbitrarily by researcher is require to the researchers for reliable experimental data. In this paper, the virtual implement of solar cell (VISC) system is proposed to solve these problems and to achieve reliable experimental result on photovoltaic system. VISC system emulates the solar cell output characteristics, and this system can substitute solar cell in laboratory experiment system. To realize the VISC, mathematical model of solar cell is studied for driving converter and the DC/DC converters are compared in viewpoint of tracking error using computer simulation. And then analysis of parallel and series characteristics was done for combination of VISC model.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.153-159
• /
• 2012

In photovoltaic system, the characteristic of photovoltaic module such as open circuit voltage and short circuit current will be changed because of cell temperature and solar radiation. Therefore, a boost converter of the PV system connects between the output of photovoltaic system and DC link capacitor of grid connected inverter as controlling duty ratio for maximum power point tracking(MPPT). This paper shows the dynamic characteristic of the boost converter by comparing single-loop control algorithm and two-loop control algorithm using both analog and digital control. The proposed both compensation method has been verified with computer simulation and simulation results obtained demonstrate the validity of the proposed control schemes.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.229-233
• /
• 2007

This paper presents the performance of PV(Photovoltaic) system, the design of MPPT(Maximum Power Point Tracker). Output of PV power system is DC, and PV power system is linked to the DC bus. The current(I)-voltage(V) output characteristic of PV cells changes with solar irradiance and cell temperature as parameters. As various PV modules respond differently to each of the parameters cited above. Maximum output of PV modules am be achieved by MPPT(Maximum Power Point Tracker) algorithm This paper includes a discussion on the performance of PV module, MPPT algorithm and the influence of PV module angle.

• Advances in Energy Research
• /
• v.1 no.2
• /
• pp.97-106
• /
• 2013

This study designs and tests a photovoltaic system with distributed maximum power point tracking (DMPPT) methodology using a field programmable gate array (FPGA) controller. Each solar panel in the distributed PV system is equipped with a newly designed DC/DC converter and the panel's voltage output is regulated by a FPGA controller using PI control. Power from each solar panel on the system is optimized by another controller where the quadratic maximization MPPT algorithm is used to ensure the panel's output power is always maximized. Experiments are carried out at atmospheric insolation with partial shading conditions using 4 amorphous silicon thin film solar panels of 2 different grades fabricated by Chi-Mei Energy. It is found that distributed MPPT requires only 100ms to find the maximum power point of the system. Compared with the traditional centralized PV (CPV) system, the distributed PV (DPV) system harvests more than 4% of solar energy in atmospheric weather condition, and 22% in average under 19% partial shading of one solar panel in the system. Test results for a 1.84 kW rated system composed by 8 poly-Si PV panels using another DC/DC converter design also confirm that the proposed system can be easily implemented into a larger PV power system. Additionally, the use of NI sbRIO-9642 FPGA-based controller is capable of controlling over 16 sets of PV modules, and a number of controllers can cooperate via the network if needed.

• Journal of Power Electronics
• /
• v.11 no.2
• /
• pp.218-227
• /
• 2011

The subject of variable step size maximum power point tracking (MPPT) algorithms has been addressed in the literature. However, most of the addressed algorithms tune the variable step size according to two variables: the photovoltaic (PV) array voltage ($V_{PV}$) and the PV array current ($I_{PV}$). Therefore, both the PV array current and voltage have to be measured. Recently, maximum power point trackers that arc based on a single variable ($I_{PV}$ or $V_{PV}$) have received a great deal of attention due to their simplicity and ease of implementation, when compared to other tracking techniques. In this paper, two methods have been proposed to design a variable step size MPPT algorithm using only a single current sensor for stand-alone battery storage PV systems. These methods utilize only the relationship between the PV array measured current and the converter duty cycle (D) to automatically adapt the step change in the duty cycle to reach the maximum power point (MPP) of the PV array. Detailed analyses and flowcharts of the proposed methods are included. Moreover, a comparison has been made between the proposed methods to investigate their performance in the transient and steady states. Finally, experimental results with field programmable gate arrays (FPGAs) are presented to verify the performance of the proposed methods.

• Journal of Power Electronics
• /
• v.17 no.5
• /
• pp.1327-1337
• /
• 2017

Photovoltaic (PV) systems are influenced by disproportionate impacts on energy production caused by frequent mismatch cases. The occurrence of multiple maximum power points (MPPs) adds complexity to the tracking process in various PV systems. However, current maximum-power point tracking (MPPT) techniques exhibit limited performance. This paper introduces an enhanced simulated annealing (ESA)-based GMPPT technique against multiple MPP issues in P-V curve with different PV system structures. The proposed technique not only distinguishes global and local MPPs but also performs rapid convergence speed and high tracking accuracy of irradiance changing and restart capability detection. Moreover, the proposed global maximum power tracking algorithm can be applied in the central converter of DMPPT and hybrid PV system to meet various application scenarios. Its effectiveness is verified by simulation and test results.

• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.826-840
• /
• 2018

This paper presents a distributed maximum power point tracking (DMPPT) algorithm based on the reference voltage perturbation (RVP) method for the PV modules of a series PV string. The proposed RVP-DMPPT algorithm is developed to accurately track the maximum power point (MPP) for each PV module operating under all atmospheric conditions with a reduced hardware overhead. To study the influence of parameters such as the controller reference voltage ($V_{ref}$) and PV current ($I_{pv}$) on the PV string voltage, a small signal model of a unidirectional differential power processing (DPP) based PV-Bus architecture is developed. The steady state and dynamic performances of the proposed RVP DMPPT algorithm and small signal model of the unidirectional DPP based PV-Bus architecture are demonstrated with simulations and experimental results. The accuracy of the RVP DMPPT algorithm is demonstrated by obtaining a tracking efficiency of 99.4% from the experiment.