• Elastomers and Composites
• /
• 제45권3호
• /
• pp.206-211
• /
• 2010

실온의 초음파 조건에서 질산 아연과 수산화 나트륨을 각각 물과 알코올 용액에서 반응시켜 산화 아연(ZnO) 나노입자를 합성하였다. 풀러렌($C_{60}$)과 ZnO 나노입자들은 전기로를 이용하여 각각 $700^{\circ}C$ 에서 2 시간 동안 가열하였다. 풀러렌($C_{60}$)과 ZnO 나노입자들의 형태와 광학성질은 XRD, SEM, TEM 과 UV-vis spectroscopy를 이용하여 분석하였다. 가열한 $C_{60}$과 ZnO 나노입자, 비가열한 $C_{60}$과 ZnO 나노입자를 각각 methylene blue(MB), methyl orange(MO), rhodamine B(RhB)용액에서 UV-vis spectroscopy를 사용하여 광촉매 분해반응을 연구하였다.

• 공업화학
• /
• 제19권6호
• /
• pp.674-679
• /
• 2008

수처리에 있어서 분말 $TiO_2$ 광촉매가 안고 있는 문제점을 극복하기 위하여 스테인리스 강 섬유를 지지체로 한 $TiO_2$ 담지 광촉매($TiO_2/SSF$)를 제조하였다. 초음파 세척기를 이용하여 담지된 $TiO_2$의 부착강도를 살펴보았으며, 메틸렌블루와 포름산 분해실험을 통하여 광촉매 활성을 평가하였고, 대장균과 비브리오균에 대한 살균실험을 통하여 살균능력을 평가하였다. 담지된 $TiO_2$는 30 min간의 초음파 처리 후에도 95% 이상이 남아 있을 정도로 강한 부착력을 보였으며, UV 하에서 60%의 메틸렌블루와 38%의 포름산을 1 h 만에 각각 분해시키는 광촉매 활성을 보였고, 대장균과 비브리오균에 대하여 99.9% 이상의 높은 살균능력을 보였다. 포름산 분해의 경우에는 산화제를 첨가하면 분해율이 증가하였으며, 특히 과산화수소를 첨가할 경우에는 분해율이 1 h 만에 80%로 증가하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.81-81
• /
• 2010

Growth of TiO2 films prepared by atomic layer deposition (ALD) was studied on C fiber. Moreover, adsorption and photocatalytic decomposition of methylene blue on TiO2 thin films were studied. Preferential growth of TiO2 on steps of C surfaces could be identified by scanning electron microscopy (SEM). X-ray Photoelectron Spectroscopy (XPS) showed thickness-dependent positive core level shift of Ti, which can be interpreted in terms of enhanced final state charging for thicker films. Adsorption and photocatalytic behaviors of TiO2 thin films will be discussed in this poster.

• 한국분말재료학회지
• /
• 제25권4호
• /
• pp.316-321
• /
• 2018

Composites of P25 $TiO_2$ and hexagonal $WO_3$ nanorods are synthesized through ball-milling in order to study photocatalytic properties. Various composites of $TiO_2/WO_3$ are prepared by controlling the weight percentages (wt%) of $WO_3$, in the range of 1-30 wt%, and milling time to investigate the effects of the composition ratio on the photocatalytic properties. Scanning electron microscopy, x-ray diffraction, and transmission electron microscopy are performed to characterize the structure, shape and size of the synthesized composites of $TiO_2/WO_3$. Methylene blue is used as a test dye to analyze the photocatalytic properties of the synthesized composite material. The photocatalytic activity shows that the decomposition efficiency of the dye due to the photocatalytic effect is the highest in the $TiO_2/WO_3$ (3 wt%) composite, and the catalytic efficiency decreases sharply when the amount of $WO_3$ is further increased. As the amount of $WO_3$ added increases, dye-removal by adsorption occurs during centrifugation, instead of the decomposition of dyes by photocatalysts. Finally, $TiO_2/WO_3$ (3 wt%) composites are synthesized with various milling times. Experimental results show that the milling time has the best catalytic efficiency at 30 min, after which it gradually decreases. There is no significant change after 1 hour.

• 한국세라믹학회지
• /
• 제45권6호
• /
• pp.324-330
• /
• 2008

Activated carbon/$TiO_2$ (AC/$TiO_2$) composites modified with different concentrations of Fe were prepared. The $N_2$ adsorption data showed that the composites had decreased surface area compared with the pristine activated carbon. This indicated the blocking of the micropores on the surface of AC, which was further supported by observation via SEM. XRD results showed patterns for the composites and an anatase typed titanium dioxide structure with a small part of rutile in a higher Fe concentration (> 1.0 mol/L). EDX results showed the presence of C and, O, with Ti peaks on the composites of Fe-AC/$TiO_2$ with relatively lower Ti concentration, which may be due to the higher Fe concentration incorporated into the composites. Subsequently, the photocatalytic effects on methylene blue (MB) were investigated. The improved decomposition of MB showed the combined effects of adsorptions and photodegradation. Especially, the composites modified by Fe revealed enhanced photodegradation behaviors of MB.

• Journal of Welding and Joining
• /
• 제21권4호
• /
• pp.46-55
• /
• 2003

TiO$_2$-WO$_3$(8.2wt%) coatings were prepared by the APS (Atmospheric Plasma Spraying) process to clarify the relationship between the process parameters(H$_2$ gas flow rate of plasma 2nd gas and spraying distance) of the APS coating and photo-decomposition efficiency kinetics of the MB(methylene blue) aqueous solution decomposition and to understand the effect of addition of WO$_3$ on photocatalytic properties of TiO$_2$ sprayed coating. Further, the temperature and velocity of flying particles were measured by DPV-2000 to investigate the relationship between microstructure of coatings and process parameters. Properties of coatins were investigated by XRD, SEM, XPS, RAMAN, UV/VIS spectrometer. In case of the TiO$_2$-WO$_3$(8.2wt%) coating, it had a lower anatase fraction than that of pure-TiO$_2$ coatings because of flying in the higher temperature plasma plume by the heavy weight of TiO$_2$, WO$_3$. And, when WO$_3$ added powders were spayed, the doping effects of W ions substituted into the Ti ion sites was not occured during melting and solidification cycles of spraying. It was found that the addition of WO$_3$ was ineffective effective on increasing photo-decomposition efficiency of TiO$_2$ sprayed coating.

• Bulletin of the Korean Chemical Society
• /
• 제30권11호
• /
• pp.2637-2642
• /
• 2009

In this present paper, we prepared $MWCNT/TiO_2$ composites by using pre-oxidized multi-walled carbon nanotubes (MWCNTs) with different titanium alkoxide precursors in benzene solvent. The composites were comprehensively characterized by BET surface area, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy dispersive X-ray analysis (EDX) and UV-Vis absorption spectroscopy. The photoactivity of the prepared materials, under UV irradiation, was tested using methylene blue (MB) in aqueous solution. Finally, according to the results of MB removal experiment, it can be considered that the MB degradation infect mainly caused by photocatalytic effect of $TiO_2$. Furthermore, the bactericidal test of the composites was also determined. It was indicated that $MWCNT/TiO_2$ composites with sunlight had greater effectiveness for B. cereus, S. aureus and E. coli than any other experimental conditions.

• 한국재료학회지
• /
• 제20권7호
• /
• pp.345-350
• /
• 2010

For the present paper, we prepared MgO/MWCNT/$TiO_2$ photocatalyst by using multi-walled carbon nanotubes (MWCNTs) pre-oxidized by m-chlorperbenzoic acid (MCPBA) with magnesium acetate tetrahydrate $(Mg(CH_2COO)_2\cdot4H_2O)$ and titanium n-butoxide $(Ti\{OC(CH_3)_3\}_4)$ as magnesium and titanium precursors. The prepared photocatalyst was analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) analysis. The decomposition of methylene blue (MB) solution was determined under irradiation of ultraviolet (UV) light. The XRD results show that the MgO/MWCNT/$TiO_2$ photocatalyst have cubic MgO structure and anatase $TiO_2$ structure. The porous structure and the $TiO_2$ agglomerate coated on the MgO/MWCNT composite can be observed in SEM images. The Mg, O, Ti and C elements can be also observed in MgO/MWCNT/$TiO_2$ photocatalyst from EDX results. The results of photodegradation of MB solution under UV light show that the concentration of MB solution decreased with an increase of UV irradiation time for all of the samples. Also, the MgO/MWCNT/$TiO_2$ photocatalyst has the best photocatalytic activity among these samples. It can be considered that the MgO/MWCNT/$TiO_2$ photocatalyst had a combined effect, the effect of MWCNT, which could absorb UV light to create photoinduced electrons $(e^-)$, and the electron trapping effect of MgO, which resulted in an increase of the photocatalytic activity of $TiO_2$.

• 한국분말재료학회지
• /
• 제24권6호
• /
• pp.477-482
• /
• 2017

Nitrogen-doped titanium dioxide (N-doped $TiO_2$) is attracting continuously increasing attention as a material for environmental photocatalysis. The N-atoms can occupy both interstitial and substitutional positions in the solid, with some evidence of a preference for interstitial sites. In this study, N-doped $TiO_2$ is prepared by the sol-gel method using $NH_4OH$ and $NH_4Cl$ as N ion doping agents, and the physical and photocatalytic properties with changes in the synthesis temperature and amount of agent are analyzed. The photocatalytic activities of the N-doped $TiO_2$ samples are evaluated based on the decomposition of methylene blue (MB) under visible-light irradiation. The addition of 5 wt% $NH_4Cl$ produces the best physical properties. As per the UV-vis analysis results, the N-doped $TiO_2$ exhibits a higher visible-light activity than the undoped $TiO_2$. The wavelength of the N-doped $TiO_2$ shifts to the visible-light region up to 412 nm. In addition, this sample shows MB removal of approximately 81%, with the whiteness increasing to +97 when the synthesis temperature is $600^{\circ}C$. The coloration and phase structure of the N-doped $TiO_2$ are characterized in detail using UV-vis, CIE Lab color parameter measurements, and powder X-ray diffraction (XRD).

• 한국산학기술학회논문지
• /
• 제10권11호
• /
• pp.3031-3038
• /
• 2009

코발트 적재된 활성탄소섬유(ACFs)는 이산화티탄($TiO_2$) 광촉매 반응을 촉진시키는 것을 발전되었다. Co-ACFs/$TiO_2$ 광촉매는 SEM, XRD, EDX 및 UV-vis 분광기를 사용하여 분석하였다. Co-ACFs/$TiO_2$ 광촉매에 대한 메틸렌불루(MB)의 분해 효과는 300분 반응해서 거의 100%를 도달하였다. 용액에 있는 MB 분자들은 ACFs의 흡착에 의해 $TiO_2$ 입자의 주위에 응축한다고 가정되었다. 그래서 이 광촉매 복합체는 MB 광분해에 대한 활성탄의 흡착성과 $TiO_2$의 광촉매 특성의 결합한 성능을 가지고 있다. 코발트가 전자 천이 효과를 가지고 있기 때문에 MB 용액의 광분해가 증가되는 것으로 판단된다.