• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.269-270
• /
• 2009

The biased vertical alignment (BVA) liquid crystal (LC) mode shows a has a distinct advantage of lower manufacture cost due to the elimination of a lithographic process step to form either ITO-patterning or protrusions on the color-filter substrates. However, those devices have complex voltage conditions which is the respective induce voltage on common electrode, pixel electrode and bias electrode when positive and negative frame. In order to overcome the complex voltage condition, the pretilt angles is controlled by photo polymerization of the UV-curable reactive mesogen (RM). According to our studies, voltages to the cell are critical to achieve an optimized surface-modified quality BVA (Q-BVA) mode which provides the well defined reorientation of the LCs with respect to an electric field.

• 대한소아치과학회지
• /
• 제33권4호
• /
• pp.693-698
• /
• 2006

유구치 1급 와동의 복합레진 수복 시 C-factor가 가장 크게 나타나며 중합수축에 의한 응력도 가장 크게 나타난다. 이 실험에서는 응력이 각 와동벽 위치에 따라 다르게 나타나는 양상을 microtensile bond strength(MTBS)실험을 통해 확인해보았다. 하악 제2유구치 20개를 두 개의 군으로 나누었다. 각각 다른 종류의 복합레진으로 수복하였고 개별 치아에서 각각 치수벽 시편과 축벽 시편을 얻어 총 4개의 군으로 나누었다. MTBS를 측정하였으며 통계적 유의성을 student T-test를 통해 검정하였다. ZP: Filtek Z250- 치수벽, ZA: Filtek Z250- 축벽, SP : Filtek Supreme - 치수벽, SA: Filtek Supreme - 축벽, 다음과 같은 결과를 얻을 수 있었다. 1. ZP군과 ZA군, SP군과 SA군 사이에서는 유의한 차이가 존재하였다(p<.001). 2. ZP군과 SP군, ZA군과 SA군 사이에서는 유의한 차이가 존재하지 않았다(p<.001).

• 한국산업보건학회지
• /
• 제30권2호
• /
• pp.153-162
• /
• 2020

Objectives: 3D printing technologies have become widely developed and are increasingly being used for a variety of purposes. Recently, the evaluation of 3D printing operations has been conducted through chamber test studies, and actual workplace studies have yet to be completed. Therefore, the objective of this study was to determine the emission of volatile organic compounds(VOCs), metals, and particles from printing operations at a workplace. This included monitoring conducted at a commercial 3D printing service workplace where the processes involved material extrusion, material jetting, binder jetting, vat photo polymerization, and powder bed fusion. Methods: Area samples were collected with using a Tenax TA tube for VOC emission and MCE filter for metals in the workplace. For particle monitoring, Mini Particle Samplers(MPS) were also placed in the printer, indoor work area, and outdoor area. The objective was to analyze and identify particles' size, morphology, and chemical composition using transmission electron microscopy with energy dispersive spectroscopy(TEM-EDS) in the workplace. Results: The monitoring revealed that the concentration of VOCs and metals generated during the 3D printing process was low. However, it also revealed that within the 3D printing area, the highest concentration of total volatile organic compounds(TVOC) was 4,164 ppb at the vat photopolymerization 3D printing workplace, and the lowest was 148 ppb at the material extrusion 3D printing workplace. For the metals monitoring, chromium, which, is carcinogenic for humans, was detected in the workplace. As a characteristic of the particles, nano-sized particles were also found during the monitoring, but most of them were agglomerated with large and small particles. Conclusions: Based on the monitoring conducted at the commercial 3D printing operation, the results revealed that the concentration of VOCs and metals in the workplace were within Korea's occupational exposure limits. However, due to the emission of nano-sized particles during 3D printing operations, it was recommended that the exposure to VOCs and metals in the workplace should be minimized out of concern for workers' health. It was also shown that the characteristics of particles emitted from 3D printing operations may spread widely within an indoor workplace.

• Restorative Dentistry and Endodontics
• /
• 제23권2호
• /
• pp.701-709
• /
• 1998

Many dental composites are Bis-GMA based resin which diluted with the more fluid monomer triethylenglycol dimethacrylate(TEGDMA). TEGDMA is often present in exess so that some quantity remains unreacted following photo-initiated polymerization. TEGDMA is a component of some resin composites which contributes to their cytotoxicity. The presence of dentin between resin composite and pulp space reduce the cytotoxicity in vitro. The root system from extrcted human third molar was removed and then a circular occlusal cavity 4mm in diameter was prepared, leaving a remaining dentinal thickness to the roof of the pulpal chamber within the range 1.0-1.5mm. Dentine was treated with 37% phosphoric acid prior to Z 100 placement without using bonding resin(group 1). In group 2, SMP(Scotchbond Multi Purpose) primer, bonding resin prior to Z 100 placement were applied sequently. In group 3, moulds with internal dimensions 4mm diameter by 2mm depth were used to contain the composite alone with an equvalent mass on tooth model, and then they were immersed directly into water. The purpose of this study is to evaluate the release rate and quantity of TEGDMA with or without the application of bonding resin. Both release rate and total cumulative amount of TEGDMA for the three groups were determined using reversed-phase HPLC at times up to 10 days. The results were as follows: 1. All experimental groups showed the highest rate of release was in the first sample period(0-4.32 min) and the rate of release declined exponentially thereafter. 2. The maximum release rate and total cumulative account of TEGDMA in the tooth model of group 1 and group 2 with the use of SMP bonding resin were reduced however ther were no significant differences between these groups(P>0.05). 3. In the first sample period(0-4.32 min), the rate of release of TEGDMA from composite resin in group 3 immersed directly into water was significantly higher than that in group 1 and group 2 of tooth model(P<0.05). Conclusively, TEGDMA diffusion from Z 100 resin was not effectively prevented by the presence of dentin in spite of using the SMP bonding resin.

• 공업화학
• /
• 제31권5호
• /
• pp.539-544
• /
• 2020

본 연구에서는 넓은 면적의 나노필라 배열 필름을 기반으로 포토 및 소프트 리소그래피 기술과 화학적 희석 고분자 중합을 조절하여 3차원 다공성의 폴리아닐린 필름을 제조하였다. 3차원 폴리아닐린 필름은 계층 간 연결된 폴리아닐린 나노파이버들로 구성되어 있어, 넓은 표면적과 개방형의 다공성 구조를 가지는 3차원 계층형 나노웹 필름을 형성한다. 전기화학분석법을 기반으로 3차원 폴리아닐린 필름이 유연한 pH 센서 전극이 되는 것을 증명하였다. 3차원 폴리아닐린 필름은 이상적인 네른스트 거동과 근접한 60.3 mV/pH의 높은 민감도를 보였다. 또한, 3차원 폴리아닐린 전극은 10 min의 빠른 반응 속도, 우수한 반복성 그리고 높은 선택성을 나타내었다. 3차원 폴리아닐린 전극을 기계적으로 굽힌 상태에서 센서 특성을 측정하였을 때, 전극이 60.4 mV/pH의 높은 민감도를 보여줌으로써, 유연한 pH 센서 성능을 증명하였다.

• Restorative Dentistry and Endodontics
• /
• 제12권2호
• /
• pp.45-53
• /
• 1987

The purpose of this study was to evaluate the tensile bond strength between composite resin and the human enamel. Three composite resin systems, two chemical (Clearfil Posterior, and Clearfil Posterior-3) and one light cure (Photo Clearfil-A), used with and without an intermediate resin (clearfil bonding agent), were evaluated under different amounts of load (10g, 200g and 200g for a moment) for in vitro tensile bond strength to acid-eched human enamel. Clinically intact buccal or lingual surfaces of 144 freshly extracted human permanent molars, embedded in acrylic were flattened with No #600 carborundum discs. Samples were randomly assigned to the different materials and treatments using a table of random numbers. Eight samples were thus prepared for each group(Table 2) these surfaces were etched with an acid etchant (Kurarey Co. Japan) in a mode of etching for 30 seconds, washing for 15 seconds, and drying for 30-seconds. During the polymerization of composite resin on the acid-etched enamel surfaces with and without bonding agent 10-gram, 200 gram and temporary 200 gram of load were applied. The specimens were stored in 50% relation humidity at $37^{\circ}C$ for 24 hours before testing. An universal Testing machine (Intesco model No. 2010, Tokyo, Japan) was used to apply tensile loads in the vertical directed (fig 5), and the force required for separation was recorded with a cross head speed of 0.25 mm/min and 20 kg in full scale. The results were as follow: 1. The tensile bond strength was much greater in applying a bonding agent than in not doing that. 2. The tensile bond strength of chemical cure composite resin was higher than that of light cure composite resin with applying on bonding agent on the acid-etched enamel. 3. In case of not applying a bonding agents on the acid-etching enamel, the highest tensile bond strength under 200 gram of load was measured in light cure composite resin. 4. The tensile bond strength under 200-gram of load has no relation with applying the bonding agent. 5. Under the load of 10-gram, There was significant difference in tensile bond strength as applying the bonding agent.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.424-432
• /
• 1998

To get a satisfactory result in the composite resin restorations, it is necessary to choose correct shade. At present, most of the commercial composite resins are based on the Vita Lumin shade guide or Bioform shade guide, but color differences might be expected even using the same shade in various materials. In this study, five kinds of light-cured composite resins with A2 and B3 shade were used to measure and compare the color each other while one porcelain served as a control. All composite resins (Spectrum TPH (SP), VeridonFil- Photo (VE), Z100 (Z100), Charisma (CH), Prodigy (PRO)) were filled in to the metal mold (12 mm diameter, 2 mm depth), followed by compression, polymerization and polishing with wet sandpaper. The specimens of porcelain were fabricated by using the refractory mold for porcelain. After 24 hours, the specimens were placed on the spectrocolorimeter and spectral reflectance were measured under CIE illuminant D65. After measuring the values of $L^*$, $a^*$, $b^*$ and ${\Delta}E^*$, following results were obtained; 1. The $L^*$, $a^*$ and $b^*$ values of both shade of porcelain specimens showed significantly higher than those of resin specimens(p<0.05). 2. In comparing the resin specimens of the A2 shade, differences were significant except $L^*$ values of SP-CH and PRO-VE, $a^*$ values of the VE-SP and $b^*$ values of the VE-Z100 and SP-PRO(p<0.05), 3. In comparing the resin specimens of the B3 shade, differences were significant except $L^*$ values of PRO-SP, $a^*$ values of the SP-PRO and Z100-VE and b* values of the PRO-SP(p<0.05). 4. In comparing the resin specimens of the A2 shade, color differences between materials (${\Delta}E^*$) showed the lowest value of 1.66, and the highest was 5.16. ${\Delta}E^*$ values of the materials of VE-PRO, CH-PRO, SP-PRO, SP-Z100 and SP-CH were lower than 3.3. 5. In comparing the resin specimens of the B3 shade, the lowest value of the ${\Delta}E^*$ was 0.57 and the highest was 5.92. ${\Delta}E^*$ values of Z100-CH and SP-PRO were lower than 3.3. The present study revealed there was perceptible color difference between materials even if they have the same designated shade based on Vita shade guide. The results of the present study suggested that it would be necessary to establish the reproducible and constant color specification system for an esthetic restoration.

• Restorative Dentistry and Endodontics
• /
• 제33권4호
• /
• pp.405-412
• /
• 2008

본 연구의 목적은 여러 가지 계면조건의 변화를 통해서 layering시 복합레진 층간의 결합에 oxygen inhibition layer (OIL)가 필수적인지를 고찰해보는 것이다. 가로 $\times$ 세로 $\times$ 두께가 16 $\times$ 28 $\times$ 2.5 mm인 알루미늄판에 지름 3.7 mm의 구멍을 형성하여 몰드를 제작하고 다음과 같이 복합레진 (Z-250, 3M ESPE)을 충전하여 광중합하였다. 1 군: 하층판에 복합레진을 충전하고 광중합 한 후, 상층판을 접합하고 레진을 충전하여 광중합을 하였다 (OIL를 남김). 2 군: 하층판에 복합레진을 충전하고 광중합 한 후 acetone에 적신 cotton으로 문질러서 OIL를 제거하고 상층판을 접합하여 복합레진을 충전하고 광중합을 하였다 (OIL를 제거). 3 군: 하층판에 복합레진을 충전하고 Mylar strip을 접합하여 공기와의 접촉을 차단한 후 광중합을 하였다. Mylar strip을 제거하고 상층판을 접합 후 복합레진을 충전하여 광중합을 하였다 (OIL형성을 억제). 4 군: 하층판에 복합레진을 충전하고 광중합 한 후 glycerin을 OIL 표면에 도포하고 다시 광중합하였다. 상층판을 접합하여 복합레진을 충전하고 광중합을 하였다 (OIL를 중합). 5군 (대조군): 하층판과 상층판의 경계에 복합레진층의 계면이 위치하지 않도록 복합레진을 bulk충전하였다 (계면형성 없이 bulk 충전한 복합레진). 24 시간 100% 습도에서 보관 후 상층판과 하층판 사이의 계면 전단결합강도를 측정하고 파절 양상을 관찰하였다. 계면을 통한 중합과정의 확산을 관찰하기 위하여 제조한 광개시제가 들어있지 않은 실험적 복합레진 (Exp_Com)을 몰드에 충전하고 상부에 flowable 복합 레진 (Aelite Flow) 또는 접착레진 (ScotchBond Multipurpose)을 접촉시킨 후 광조사하였다. 몰드내의 미중합된 Exp_Com을 acetone bath 에서 5 분 동안 제거한 후 몰드내에 다시 Aelite Flow를 충전하고 광중합을 시행하였다. 경화된 복합레진 시편의 단면을 관찰하여 Exp_Com 층의 두께를 측정하였다. OIL를 배제하거나 중합시킨 2-4군은 OIL이 존재하는 1 군과 통계적으로 유의한 결합강도의 차이를 보이지 않았으며, Mylar strip을 이용하여 OIL의 생성을 억제했던 3군과 glycerin을 도포하여 OIL를 중합시킨 4군은 계면을 생성하지 않은 대조군인 5 군과도 통계적으로 유의한 차이를 보이지 않았다. 중합과정의 확산에 의해 중합개시제가 포함되지 않은 Exp_Com내에 중합된 층이 생겨난 것을 시각적으로 확인할 수 있었으며, Exp_Com의 중합층 두께는 flowable 레진의 경우 20.95 (0.90) um였고 접착레진의 경우 42.13 (2.09) 였다.