• 디지털융복합연구
• /
• 제15권7호
• /
• pp.393-400
• /
• 2017

일반적으로 특수영상 및 3D 애니메이션 제작에서 캐릭터와 배경을 3D 모델링을 할 때 MAYA나 3DS MAX 등의 3D 프로그램을 사용하여 제작한다. 그러나 이러한 제작방식은 작업 시간이 많이 소요될 뿐만 아니라 고비용이 발생한다. 본 연구에서는 2D 포토스캔 제작기술을 활용한 3D 모델링 제작방법의 우수성과 효율성을 증명하기 위하여 두 가지 실험을 하였다. 첫 번째, 동일한 오브젝트를 다양한 방법으로 모델링을 하였다. 두 번째, 동일한 백그라운드를 각기 다른 방법을 이용하여 모델링을 하였다. 이 두 가지 실험을 통하여 효과적인 2D 포토스캔 제작방법으로 모델링 시 유의해야할 사항과 제작기술 등을 제시하였다. 또한 실험에 따른 결과물을 바탕으로 2D 포토스캔 모델링 제작방법의 효율성과 우수성을 증명하였다.

• 대한원격탐사학회지
• /
• 제26권3호
• /
• pp.347-359
• /
• 2010

Ortho-photos provide valuable spatial and spectral information for various Geographic Information System (GIS) and mapping applications. The absence of relief displacement and the uniform scale in ortho-photos enable interested users to measure distances, compute areas, derive geographic locations, and quantify changes. Differential rectification has traditionally been used for ortho-photo generation. However, differential rectification produces serious problems (in the form of ghost images) when dealing with large scale imagery over urban areas. To avoid these artifacts, true ortho-photo generation techniques have been devised to remove ghost images through visibility analysis and occlusion detection. So far, the Z-buffer method has been one of the most popular methods for true ortho-photo generation. However, it is quite sensitive to the relationship between the cell size of the Digital Surface Model (DSM) and the Ground Sampling Distance (GSD) of the imaging sensor. Another critical issue of true ortho-photo generation using high resolution satellite imagery is the scan line search. In other words, the perspective center corresponding to each ground point should be identified since we are dealing with a line camera. This paper introduces alternative methodology for true ortho-photo generation that circumvents the drawbacks of the Z-buffer technique and the existing scan line search methods. The experiments using real data are carried out while comparing the performance of the proposed and the existing methods through qualitative and quantitative evaluations and computational efficiency. The experimental analysis proved that the proposed method provided the best success ratio of the occlusion detection and had reasonable processing time compared to all other true ortho-photo generation methods tested in this paper.

• Journal of Korean Dental Science
• /
• 제15권1호
• /
• pp.19-30
• /
• 2022

Purpose: The purpose of the study was to assess the validity of three-dimensional (3D) facial scan taken with facial scanner and digital photo wrapping on the cone-beam computed tomography (CBCT). Materials and Methods: Twenty-five patients had their CBCT scan, two-dimensional (2D) standardized frontal photographs and 3D facial scan obtained on the same day. The facial scans were taken with a facial scanner in an upright position. The 2D standardized frontal photographs were taken at a fixed distance from patients using a camera fixed to a cephalometric apparatus. The 2D integrated facial models were created using digital photo wrapping of frontal photographs on the corresponding CBCT images. The 3D integrated facial models were created using the integration process of 3D facial scans on the CBCT images. On the integrated facial models, sixteen soft tissue landmarks were identified, and the vertical, horizontal, oblique and angular distances between soft tissue landmarks were compared among the 2D facial models and 3D facial models, and CBCT images. Result: The results showed no significant differences of linear and angular measurements among CBCT images, 2D and 3D facial models except for Se-Sn vertical linear measurement which showed significant difference for the 3D facial models. The Bland-Altman plots showed that all measurements were within the limit of agreement. For 3D facial model, all Bland-Altman plots showed that systematic bias was less than 2.0 mm and 2.0° except for Se-Sn linear vertical measurement. For 2D facial model, the Bland-Altman plots of 6 out of 11 of the angular measurements showed systematic bias of more than 2.0°. Conclusion: The facial scan taken with facial scanner showed a clinically acceptable performance. The digital 2D photo wrapping has limitations in clinical use compared to 3D facial scans.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1601-1604
• /
• 2006

A novel photo-alignment scheme using normally incident periodically intensity-modulated UV light has been developed and demonstrated to efficiently yield a stable pretilt angle of nematic liquid crystals by single exposure. The scheme, referred to as the "photo-rubbing", consists in unidirectional scan of the intensity-modulated UV light over the photo-alignment film, which causes asymmetrical photo-reactions in the film. We show here its successful application to multi-domain alignment processing. Thanks to the normal incidence, the photo-rubbing removes the instrumental disadvantages of the conventional oblique incidence technique, thereby providing a true practical solution for photo-alignment.

• 한국산학기술학회논문지
• /
• 제14권9호
• /
• pp.4467-4471
• /
• 2013

본 연구에서는 Nano급 반도체 생산공정에서 필수적인 스피너(spinner) 설비의 감광액 도포(photo resist coating)시스템의 효율을 획기적으로 개선할 수 있는 새로운 완전스캔(Full-scan) 방식의 감광액 도포시스템(FPCS : Full-scan Photo-resist Coating System)을 개발하였다. 또한, 감광액의 미 도포로 인한 복합적인 공정불량을 예방하기 위하여 실시간(real-time)으로 상태요소들을 감시할 뿐만 아니라 상태요소의 비정상적 변화나 웨이퍼 가공불량이 발생할 경우 해당 유니트(unit)를 정지시킴과 동시에 원격지에 있는 엔지니어에게 경보를 전송함으로써 즉각적인 대처가 가능할 수 있도록 개발하였다.

• 한국인쇄학회지
• /
• 제16권3호
• /
• pp.81-95
• /
• 1998

If a image doesn't include sufficient data of output size and resolution, we will scan again the image. Interpolation generates a new pixel by methematical average of processing. In the interpolation method, there are nearest neighbor interpolation, bilinear interpolation and bicubic interpolation etc. This study was carried out for the purpose of researching compatible method to digital scan image caused by only different interpolation methods. Nearest neighbor interpolation show superior effect in the drawing image. Bilinear interpolation show reduction in detail and contrast. Bicubic interpolation show superior effect in the digital photo image USM(Unsharp Mask) application after extension by interpolation show better than extension by interpolation after USM(unsharp mask) application.

• Journal of information and communication convergence engineering
• /
• 제3권4호
• /
• pp.179-183
• /
• 2005

A photodiode capable of obtaining a sufficient photo/ dark current ratio at both forward bias state and reverse bias state is proposed. The photodiode includes a glass substrate, an aluminum film formed as a lower electrode over the glass substrate, an alumina film formed as an insulator barrier over the aluminum film, a hydrogenated amorphous silicon film formed as a photo conduction layer over a portion of the alumina film, and a transparent conduction film formed as an upper electrode over the hydro-generated amorphous silicon film. A good quality alumina $(Al_2O_3)$ film is formed by oxidation of aluminum film using electrolyte solution of succinic acid. Alumina is used as a potential barrier between amorphous silicon and aluminum. It controls dark-current restriction. In case of photodiodes made by changing the formation condition of alumina, we can obtain a stable dark current $(\~10^{-12}A)$ in alumina thickness below $1000{\AA}$. At the reverse bias state of the negative voltage in ITO (Indium Tin Oxide), the photo current has substantially constant value of $5{\times}10^{-9}$ A at light scan of 100 1x. On the other hand, the photo/dark current ratios become higher at smaller thicknesses of the alumina film. Therefore, the alumina film is used as a thin insulator barrier, which is distinct from the conventional concept of forming the insulator barrier layer near the transparent conduction film. Also, the structure with the insulator thin barrier layer formed near the lower electrode, opposed to the ITO film, solves the interface problem of the ITO film because it provides an improved photo current/dark current ratio.

• Journal of Electrical Engineering and Technology
• /
• 제8권5호
• /
• pp.1169-1174
• /
• 2013

The objective of this work was to increase the efficiency of ultraviolet-light emitting diodes at 375 nm for sterilization. Since $TiO_2$ had antibacterial properties, which were attributed to the appearance of hydroxyl radicals and superoxide radical anions on the surface species under ultra violet radiation at about 387 nm, photo-reactive layers such as Ag-doped $TiO_2$ were coated on aluminum substrates by electrostatic spraying. Crystallinity and surface morphology of the coating layer were examined by X-ray diffraction ${\theta}-2{\theta}$ scan and field emission-scanning electron microscope, respectively. In an antibacterial test, we observed above 99% reduction of Escherichia coli populations on 3 or 5 mol% Ag-doped $TiO_2$ layers after irradiation for 2 hrs at 375 nm, while very low inactivation on bare aluminum substrates occurred after irradiation as the same condition.

• Journal of Biosystems Engineering
• /
• 제29권6호
• /
• pp.515-520
• /
• 2004

A device far estimating the optimal artificial insemination time consisted of a computer, RS module, and six direct-reflex photo-sensors. Program was written in LabWindows CVI. In order to establish references for estimating optimal artificial insemination time, lying rate of the thirty three $Berkshire{\times}Hampshire crossbred sows (parity 5 to 6) was recorded from 2 days after moving into stalls to artificial insemination using a time lapse VCR and was measured every hour with one minute interval using the scan point sampling method. Twenty low hours in a day were divided into three comparing periods : 21:00 to 06:59, 07:00 to 13:59, and 14:00 to 20:59. If sum of the percentages of tying during a comparing period was less than the reference value, the starting hour of the comparing period was considered as onset of estrus and the optimal artificial insemination time was estimated at 20 to 24 hours after onset of estrus. The experimental device was evaluated with twenty five $Berkshire{\times}Hampshire$ crossbred sows (parity 2 to 7) and 23 of 25 sows $(92\%)$ were pregnant. This result suggests that the experimental device is excellent in performance for estimating optimal artificial insemination time.

• 지적과 국토정보
• /
• 제48권1호
• /
• pp.111-121
• /
• 2018

본 연구에서는 무인항공기(UAV:Unmanned Aircraft Vehicle)의 입체영상을 이용하여 사진측량학 원리를 적용하므로서 수치표고모형, 실감정사영상 및 3차원 수치 데이터를 제작 및 평가를 수행하였다. 스테레오 입체시를 수행하기 위해서는 수치도화기(DPW:Digital Photogrammetric Workstation)를 필수적으로 이용해야 하는데 본 연구에서는 최근 산자부에서 개발된 3차원 공간정보 제작시스템인 GEOMAPPER 1.0을 사용하였다. 무인항공기의 중복된 두 영상을 이용하여 입체시 생성하기 위해서는 카메라의 내부표정요소와 외부표정요소가 계산되어야 하며, 정확한 입체시를 위해서 비항측용 일반 카메라의 렌즈왜곡에 대한 정확한 보정이 필수적이다. 렌즈의 왜곡보정 및 지상기준점을 이용한 표정요소의 결정은 상업용 소프트웨어인 PhotoScan 1.4를 사용하였다. 무인항공기는 케이로보틱스의 고정익 장비(KD-2)를 사용하였고 항공삼각측량과정을 통하여 최종적으로 실감정사영상을 생성하고 수치지형도를 일부 제작하여 수치도화의 오차분석을 수행하였다. 그 결과 입체도화 방식으로 축척 1:1/2,500~1/3,000 수치지형도의 제작 가능성을 확인 할 수 있었다.