• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권4호
• /
• pp.338-346
• /
• 2016

Purpose: The purpose of this research is to improve the reliability of the composite material blades used for the wind power generator, by applying the phased array ultrasonic testing technique out of the many nondestructive test into the blades. Method: The wind power generation composite blades are used, as a case study, in order to evaluate the reliability of the phased array ultrasonic testing technique. Defects that are most likely occurred in the field are injected into the different locations of the three different types of artificial test pieces and then phased array ultrasonic testing technique are applied to evaluate the reliability of its effectiveness. Result: As a result of the analysis of the defect signals by applying the A scan and B scan simultaneously, depth and width of the defect could be obtained. An area of defect was proportional to the amount of energy by color in B scan image. The larger amount of energy, reflected amount of energy was appeared in the order of red, orange, yellow, blue color. Conclusion: The most reliable testing method to detect the defect in composite blades for wind power generation is considered to be the combination of the other destructive testing technique with the phased array ultrasonic testing since the PAUT alone could not detect all range of the defects in the blades.

• 한국소음진동공학회논문집
• /
• 제24권2호
• /
• pp.123-130
• /
• 2014

An ultrasonic magnetostrictive transducer-based phased-array system for imaging defects in plate structures is newly proposed. In that most ultrasonic phased array systems rely on piezoelectric transducers or electromagnetic acoustic transducers, this system has its own unique feature of employing magnetostrictive transducers. Interest in using a phased array system using magnetostrictive transducers has been recently reported for pipe inspection but no such system has been developed for plate inspection. In this investigation, we aim to propose a phased array system using OL-MPTs (Omnidirectional Lamb wave Magnetostrictive Patch Transducers) for plate inspection. The developed system consists of a multi-channel function generator, power amplifiers, preamplifiers and a data acquisition unit. In the process of its development, each of the units must be checked and in doing so, we suggest types of ultrasonic wave experiments that should be carried out. Finally, the phased system using a transducer array composed of eight OL-MPTs is newly configured and is applied for actual crack detection experiments.

• 전자공학회논문지A
• /
• 제32A권11호
• /
• pp.9-16
• /
• 1995

In this paper, an ultrasonic phased array transducer with spherical liquid lens, which utilizes both electronic focusing by linear phased array and variable geometric focusing by spherical lens. is investigated. This system reduces the elevational beamwidth which is disadvantage of the 1-dimensional linear phased array, and adds real-time dynamic focusing capability by controlling the volume of liquid in the lens. A prototype of this transducer is constructed and tested. The experimental results are compared with those of computer simulations. The range of applications are in the hyperthermia applicators or ultrasonic image system with narrow beam and rapid scanning characterisitcs.

• 비파괴검사학회지
• /
• 제26권6호
• /
• pp.440-446
• /
• 2006

The reactor vessel body and closure head are fastened with the stud bolt that is one of crucial parts for safety of the reactor vessels in nuclear power plants. It is reported that the stud bolt is often experienced by fatigue cracks initiated at threads. Stud bolts are inspected by the ultrasonic technique during the overhaul periodically for the prevention of failure which leads to radioactive leakage from the nuclear reactor. The conventional ultrasonic inspection for stud bolts was mainly conducted by reflected echo method based on shadow effect. However, in this technique, there were numerous spurious signals reflected from every oblique surfaces of the thread. In this study, ultrasonic phased array technique was applied to investigate detectability of flaws in stud bolts and characteristics of ultrasonic images corresponding to different scanning methods, that is, sector and linear scan. For this purpose, simplified stud bolt specimens with artificial defects of various depths were prepared.

• Nuclear Engineering and Technology
• /
• 제48권1호
• /
• pp.228-235
• /
• 2016

Flaws at dissimilar metal welds (DMWs), such as reactor coolant systems components, Control Rod Drive Mechanism (CRDM), Bottom Mounted Instrumentation (BMI) etc., in nuclear power plants have been found. Notably, primary water stress corrosion cracking (PWSCC) in the DMWs could cause significant reliability problems at nuclear power plants. Therefore, phased array ultrasound is widely used for inspecting surface break cracks and stress corrosion cracks in DMWs. However, inspection of DMWs using phased array ultrasound has a relatively low probability of detection of cracks, because the crystalline structure of welds causes distortion and splitting of the ultrasonic beams which propagates anisotropic medium. Therefore, advanced evaluation techniques of phased array ultrasound are needed for improvement in the probability of detection of flaws in DMWs. Thus, in this study, an investigation of focusing and steering phased array ultrasound in DMWs was carried out using a time reversal technique, and an adaptive focusing technique based on finite element method (FEM) simulation. Also, evaluation of focusing performance of three different focusing techniques was performed by comparing amplitude of phased array ultrasonic signals scattered from the targeted flaw with three different time delays.

• 비파괴검사학회지
• /
• 제37권1호
• /
• pp.13-20
• /
• 2017

일반 위상배열초음파 시스템은 배열된 개별의 소자에 시간지연을 적용함으로써 초음파 빔을 조향하고 초음파 이미지를 구성한다. 반면, full matrix capture(FMC)은 위상배열탐촉자에서 가능한 모든 송수신 조합의 A-scan 데이터 전체를 수집하는 신호 수집 방법이며, FMC 데이터의 후처리를 통해 기존 위상배열초음파와 동등한 이미지뿐만 아니라 기존 위상배열초음파에서 구현하지 못하는 다양한 이미지를 합성할 수 있다. 본 논문에서는, 균열 형태의 결함을 영상화할 수 있는 LLL mode total focusing method(TFM)에 대한 기본 알고리즘을 기술하고, 실험 및 초음파 시뮬레이션을 통해 수집된 FMC 데이터에 대해 이 기법을 적용하여 결함의 이미지를 합성하였다.

• 비파괴검사학회지
• /
• 제35권5호
• /
• pp.299-306
• /
• 2015

일반 위상배열 시스템에서는 다수의 압전소자를 가지는 탐촉자의 개별 소자에 인가하는 시간지연을 조절함으로써 초음파빔을 전자적으로 제어하고 초음파 영상을 획득한다. 반면, full matrix capture(FMC) 기술은 위상배열 탐촉자에 대해 하나의 소자에서 초음파를 입사시킨 신호를 모든 압전소자에서 수신하고, 이 방법으로 모든 가능한 송수신 조합의 신호 데이터를 수집하는 방법이다. 이 FMC 데이터는 후처리를 통해 초음파 영상으로 재구성될 수 있으며, 기존 위상배열 초음파 영상과 동등한 영상뿐만 아니라 가상적으로 관심영역의 모든 지점에 집속하여 분해능과 선명도가 향상된 total focusing method(TFM) 영상으로도 합성이 가능하다. 본 논문에서는 일반 위상배열장치를 이용하여 FMC가 가능하도록 시스템을 구현하고, 취득된 FMC 신호로부터 sector B-scan 및 TFM 이미지를 영상화하는 알고리즘에 대한 연구를 수행하였다.

• 한국전자통신학회논문지
• /
• 제14권1호
• /
• pp.137-146
• /
• 2019

다수의 초음파 트랜스듀서를 이용한 초음파 위상 배열은 초점제어에 의해 인체 내 종양을 치료하는 목적 등으로 사용되고 있다. 초점제어에 의해 결정된 각 초음파 트랜스듀서 표면음압의 크기와 위상은 각 초음파 트랜스듀서에 인가되는 전압의 크기와 위상을 제어하여 구현 가능하다. 본 논문에서는 초음파 트랜스듀서의 인가전압과 표면음압 사이의 관계를 모델링하고, 요구되는 초음파 트랜스듀서의 표면음압을 생성하기 위한 인가전압을 PWM 기법으로 제어하는 방법을 제안한다. 제안한 방법의 타당성은 61개의 초음파 트랜스듀서로 구성된 초음파 위상배열의 초점제어를 예로 들어 시뮬레이션으로 검증하였다.

• 비파괴검사학회지
• /
• 제25권4호
• /
• pp.304-310
• /
• 2005

용접부 및 구조물에 발생된 결함의 깊이를 정밀하게 측정하기 위한 노력은 현재까지 계속되어 왔으며 앞으로도 계속되어야 할 연구분야중의 하나이다. TOFD 검사기법은 현재까지 결함의 깊이를 측정하기 위한 여러 가지 검사 방법중에 가장 정밀한 것으로 알려져 있다. 그러나 사용하는 초음파 굴절각에 따른 빔의 도달범위에 의하여 결함을 놓칠 우려가 있다. 본 여구에서는 일반적인 TOFD 기법대신 위상배열 초음파 기법을 이용한 TOFD 검사를 적용하여 두께가 두꺼운 검사대상에 대하여 결함의 검출능 및 깊이 측정결과를 비교하였다. 위상배열 초음파를 이용한 TOFD 검사를 사용함으로써 다양한 결함에 대하여 검출능 및 정확한 깊이 측정이 가능함을 실험적으로 확인하였다. 본 연구에서 개발된 위상배열 TOFD 기법은 발전설비의 압력용기와 같은 두꺼운 검사대상에 적용될 경우 검사 신뢰도 향상에 기여할 것으로 판단된다.

• 비파괴검사학회지
• /
• 제25권6호
• /
• pp.467-474
• /
• 2005

The expanded multi-Gaussian beam model has recently been developed that can calculate the radiation beam field from a single, rectangular transducer with great computational efficiency. In this study, this model is adopted to calculate the radiation beam field for a phased array transducer with various time delays to achieve steering and/or focusing. The calculation beam fields are compared to those obtained by well known Rayleigh-Sommerfeld integral that provides the exact solution in order to explore the validity of the expanded multi-Gaussian beam model And then, this study proposes a complete ultrasonic measurement model including the expanded beam model, far-field scattering model and system efficiency, Using the proposed model, phased array ultrasonic testing signals for a flat-bottomed hole with/without focusing were performed.