• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1621-1626
• /
• 2003

This study deals with the heat transfer analysis on phase change optical disc with land/groove recording by means of numerical method. Finite difference time domain(FDTD) method was used to obtain the amount of absorption of light propagating inside disc and finite difference element(FEM) method was used to calculate the temperature distribution. The calculated results present the detailed information of recording characteristics on the phase change optical disc. The temperature profiles are quite different between the land track and the groove track. The recorded mark shape on land track is smaller and more elliptic than that on groove track. It is shown that the thermal problem to the neighboring track takes place due to secondary peaks. It is found that the different write strategy should be applied to land and groove recording, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.20-22
• /
• 1997

In ours study, we investigated the various properties in Te-light doped $Sb_{85}$G $e_{15}$ thin films such as the change of reflectance and transmittance according to phase change from amorphous to crystalline states In all films the transmittance was decreased, but the reflectance was increased by annealing. Particularly, the reflectance between as- deposited state and annealed state showed the largest change in the T $e_{0.5}$($Sb_{85}$G $e_{15}$ )$_{99.5}$ thin film at 780nm, which was about 40% in as-deposited state and about 70% in annealed state. Therefore, it might be considered that the T $e_{0.5}$($Sb_{85}$G $e_{15}$ )$_{99.5}$ thin film is recording medium showing to a good optical properties if it is used to optical recording of the phase change type. change type.ype.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.1
• /
• pp.93-98
• /
• 2005

Rewritable optical disk is one of the essential data storage media in these days, which takes advantage of the different optical properties in the amorphous and crystalline states of phase change materials. As well known, data transfer rate is one of the most important parameter of the phase change optical disks, which is mostly limited by the crystallization speed of recording media. Therefore, we doped Sn/Bi to $Ge_2Sb_2Te_5$ alloy in order to improve the crystallization speed and investigated the dependence of phase change characteristics on Sn/Bi doping concentration. The Sn/Bi doped $Ge_2Sb_2Te_5$ thin film was deposited by RF magnetron co-sputtering system and phase change characteristics were investigated by X-ray diffraction (XRD), static tester, UV-visible spectrophotometer, electron probe microanalysis (EPMA), inductively coupled plasma mass spectrometer (ICP-MS) and atomic force microscopy (AFM). Optimum doping concentration of Bi and Sn were 5${\~}$6 at.$\%$ and the minimum time for crystallization was below than 20 ns. This improvement is correlated with the simple crystalline structure of Sn/Bi doped $Ge_2Sb_2Te_5$ and the reduced activation barrier arising from Sn/Bi doping. The results indicate that Sn/Bi might play an important role in the transformation kinetics of phase change materials..

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.1
• /
• pp.34-41
• /
• 2005

We report some recent results in the rewritable Blu-ray Disc with enhanced overwrite cyclability by using the growth dominant eutectic based Ge(Sb70Te30)+Sb recording layer, GeN interface layer and write strategy optimization. We have developed phase-change optical media with appropriate write strategy for 36(i.e., 1X)-72Mbps(i.e., 2X) dual speed Blu-ray Disc system and fur the future high speed optical data storage. For recording layer, eutectic-based Ge(Sb70Te30)+Sb material was used and Sb/Te ratio and Ge content were optimized to obtain proper erasability and archival stability of recorded amorphous marks. The recording layer is wrapped up in GeN interface layers to obtain overwrite cyclability and higher crystallization speed. In addition, we designed appropriate write strategy so called Time-Shifted Multipulse (TSMP) write strategy where starting position of multipulse parts are shined from reference clock. With this write strategy, the jitter characteristics of the disc was improved and we found that leading edge jitter was improved much more than trailing edge jitter in 1X-2X speed recording. Finally, we investigated the higher speed feasibility of 144Mbps(i.e., 4X) by adopting some elemental doping to the eutectic based Ag-In-Sb-Te recording layer and structural optimization of constitution layers in Blu-ray Disc. In the paper, we report the effect of Sn addition for the feasibility of higher speed recording. The addition of Sn shows increases of the crystallization speed of phase change recording layer.

• Electrical & Electronic Materials
• /
• v.8 no.2
• /
• pp.229-236
• /
• 1995

Multimedia has created a system environment that needs a combination of diverse peripherals, faster I/O, and easier configuration. The sheer volume of data one can expect with multimedia hardware and applications storage systems of higher capacity and faster data transfer rate. Unlike the magneto-optical(MO)disk technology which uses bias magnetic field in writing, both the reading and the writing in the phase change (PC) technology are performed only by laser light. In PC optical media, an active layer is reversibly converted between amorphous state and crystalline state by changing irradiation conditions of focused laser beam. Thus, as compared with MO disk, the PC disk has such great advantages that signals can be reproduced by change of reflectance of laser beams in the same manner as the compact disc. The reflectivity of a phase-change spot can be altered in a single pass under the head only through modulation of laser power. The principles and the current status of phase-change optical recording media combined with possible applications are discussed in the present article.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.4
• /
• pp.314-320
• /
• 1998

In this study, we have investigated crystallization properties of $Te_x(Sb_{85}Ge_{15})_{100-x}$ (x=0.3, 0.5, 1.0) thin films prepared by thermal evaporation. The change of reflectance according to phase change from amorphous to crystalline phases with annealing and exposure of diode laser is measured b the n&k analyzer and the surface morphology between amorphous and crystalline phase is analyzed by SEM and AFM. The difference in reflectance($\DeltaR$) between amorphous and crystalline phase appears approximately 20% at the diode laser wavelength, 780nm in all prepared films. Especially, the reflectance difference,$\DeltaR$ comes up to about 30% in $Te_{0.5}(Sb_{85}Ge_{15})_{99.5}$ thin film. Also, amorphous-to-crystalline phase change is observed in all prepared films. As a result of the measurement of the reflectance using diode laser, the reflectance is increased in proportion to the laser power and exposure time in all films. As a result of observing each film with the SEM and AFM, the surface morphology of the annealed and the exposed films are evidently increased than those of as-deposited films. The fast crystallization is occurred by increasing in Te content. Therefore, we conclude that the $Te_{0.5}(Sb_{85}Ge_{15})_{99.5}$ and $Te_1(Sb_{85}Ge_{15})_{99}$ thin films can be evaluated as an attractive optical recording medium with high contast ratio and fast erasing time due to crystallization.

• Electrical & Electronic Materials
• /
• v.10 no.3
• /
• pp.289-294
• /
• 1997

디지탈 비디오 디스크의 약어로 지칭되는 DVD는 현대 과학이 이루어낸 레이저 광에 의한 정보의 기록과 재생을 한층 승화시킨 차세대 package형 광 기록 매체이다. 앞으로 이 제품군은 기존에 분리되어 있던 가전과 컴퓨터의 응용분야를 이어주는 교량역할을 할 새로운 개념의 상품으로 기대된다. 본 고에서는 DVD의 기술적 배경 및 이의 구현을 위해 활용된 요소기술, 그리고 미래기술로의 흐름에 관해 소개고자 한다.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.124-127
• /
• 2005

Rewritable optical memory devices such as an CD-RW and DVD+RW are data storage media, which take advantage of the different optical properties in the amorphous and crystalline states of phase change materials. The switching property, structural transformation, transformation kinetics and chemical bindings of $Ge_xSb_{100-x}$($6{\le}x{\le}$34) were studied to investigate the feasibility of applying $Ge_xSb_{100-x}$ alloys in optical memory. The $Ge_xSb_{100-x}$ thin film was deposited by RF magnetron co-sputtering system and phase change characteristics were investigated by X-ray diffraction (XRD), static tester, inductively coupled plasma atomic emission spectrometer (ICP-AES) and atomic force microscopy (AEM). Optimum fiim composition of $Ge_xSb_{100-x}$ was studied and its minimum time fur laser induced crystallization and optical contrast fur phase transition was performed. These results might be correlated with the binding energies between Ge and Sb, and indicate that $Ge_xSb_{100-x}$ have an potential far optical memory applications.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.78-79
• /
• 2003

타원법(ellipsometry)을 사용하여 광기록 매체용 Ge$_2$Sb$_2$Te／sub 5／(GST) 박막의 성장과정에 따른 타원상수 Ψ와 $\Delta$를 측정하여, GST 박막의 최적성장조건을 연구하였다. 아르곤기체압력과 DC 출력 그리고 기판의 온도를 변화시키면서 GST 박막을 성장시켰다. 제작된 시료들의 분광타원 데이터를 모델링분석하여 GST 박막의 밀도분포를 구하고 한편으로는 GST 박막이 성장하는 동안 측정한 in situ 타원 성장곡선을 분석하여 박막의 밀도분포의 변화를 추적하였다. (중략)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.9-14
• /
• 1996

The dependence of microstructural and optical properties of Ag-In-Sb-Te thin films on annealing heat-treatments was studied. It was found from the present work that the increase of reflectance after annealing heat-treatment is related with phase change of Ag-In-Sb-Te thin film from amorphous state to crystalline phases which involve Sb crystalline phase and AgInTe$_2$ stoichiometric phase. On the other hand, the reflectance is decreased after high temperature annealing (above 450$^{\circ}C$), due to the morphology .mange of film surface. For the purpose of practical application(erasable optical disk), we fabricated quadrilayered Ag-In-Sb-Te alloy disk, and annealed it with continuous laser beam. As result of this laser\ulcorner annealing treatment, we found that the increment of reflectance is 9.3% at 780nm wavelength. It might be considered that Ag-In-Sb-Te alloy optical disk is the big promising candidate for the erasable optical memory medium.