• Journal of the Korean Ceramic Society
• /
• v.33 no.4
• /
• pp.405-410
• /
• 1996

The partial substitution of LiTaO3 with Al2O3 caused the variation of dielectric properties and a lower melting temperature yielding an easier growth of single crystal. The lattice constants and Raman band broadening were measured for the LiTaO3 solid solution in which the cations of Li+ and Ta5+ were partially substituted by Al3+ cation. The LiTaO3 type limit phases were obtained. ; Li1.15Al0.45Ta0.7O3 for cationic excess Li1.15Al0.45Ta0.7O3 for stoichiometry Li0.85Al0.05TaO3 for cationic deficit. The second phase was formed beyond the solubility limit. The limit phase (Li0.85Al0.05TaO3) in the region of cationic deficit showed the lowest Cuire temperature of 61$0^{\circ}C$ and melting point of 152$0^{\circ}C$ compared to the solid solutions in other regions (TMp=1$650^{\circ}C$, Tc=69$0^{\circ}C$ for LiTaO3)

• Analytical Science and Technology
• /
• v.13 no.3
• /
• pp.269-276
• /
• 2000

Chromatographic retention mechanism of seven benzoic acids in RPLC were investigated. Inorganic salt is pertinent for the measurement of dead time in benzoic acid. Logarthims of capacity factor (log k') and Hildebrand solubility parameter (${\delta}$) showed proportional relationship which imply the hydrophobic effect of the retention mechanism in RPLC. Enthalpies of solute transfer showed inverse proportion to temperature and organic modifier ratio of the mobile phase. It was found that the S value showed positive slope in plot of log k' vs. volume fraction of water in mobile phase. Free energy change increases with increasing organic volume fraction. The hydrophobicity index, ${\varphi}_0$(organic volume fraction) is inversely proportional to column temperature.

• Journal of the Korean Ceramic Society
• /
• v.43 no.1 s.284
• /
• pp.48-54
• /
• 2006

Hydroxyapatite $(HAp,\;Ca_{10}(PO_4)_6(OH)_2)$/alumina composites were fabricated with the addition of fluorides, such as $MgF_2$ and $CaF_2$. In this study, the effect of fluorides on the inhibition of phase decomposition and the mechanical properties of HAp was investigated. Due to the higher solubility of F ion in HAp structure, $MgF_2$ additive was more effective compared to $CaF_2$ additive in the lowering decomposition temperature of HAp. Therefore, the dissociation tendency of HAp was fully inhibited below $1400^{\circ}C$. The mechanical properties of HAp composites with $MgF_2$ additive showed higher value (flexural strength: $\~170MPa$, Vickers hardness: $\~7\;GPa$, fracture toughness: $\~1.5\;MPam^{1/2}$) compared to $MgF_2-free$ composites. The linear thermal expansion coefficient of HAp composites with $MgF_2$ showed the value of $16.4\times10^{-6}/^{\circ}C\;at\;20\~400^{\circ}C $.

• Applied Chemistry for Engineering
• /
• v.18 no.2
• /
• pp.130-135
• /
• 2007

Entrapment of (-)-epigallocatechin gallate (EGCG) into ethosome was carried out for improving its stability against decomposition. Solubility of EGCG was increased by the addition of ethanol into water, which enable ethosome to entrap appropriate amount of EGCG. It was observed that the EGCG solution concentration and constituent lipid composition had a considerable effect on the particle size and entrapment efficiency of ethosomes. The formation of liquid crystalline phase in ethosome was investigated by polarized optical microscopy. By comparing the stability of EGCG in solution and in ethosome exposed to UV or high temperature, we evaluated the EGCG stabilization effect through its entrapment in ethosome. Incorporation of tocopherol into ethosome retarded the decomposition of EGCG under UV.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1996.11a
• /
• pp.174-176
• /
• 1996

In the YBCO matrix, 10wt.% Y$_2$BaCuO$\_$5/ (211 phase) was added, the final 211 content of YBCO made by MTG process could reach about 20wt.% which was the optimum value for the critical current density. And also 10wt.% Ag was added in the matrix of YBCO, which was nearly about the saturate solubility of silver in textured YBCO. SmBaCuO crystal was grown by the melted-condensed process. A 5${\times}$5${\times}$2㎣ single crystal of SmBaCuO was used to be the seed in the preparation of YBCO. It was proved the orientation of YBCO was the same as the orientation of the SmBaCuO seed. The oxygen absorption of bulk oriented YBCO was studied and the heat treatment of oxygen absorption would be in flowing oxygen, at 400$^{\circ}C$ for about 24 hours. the magnetic hysteresis loops were measured by Vibrating Smaple Magnetometer and the J$\_$c/ was calcuated by means of Bean's model.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.3
• /
• pp.355-361
• /
• 1999

To improve the volatility and stability of lead complexes, the principle of stabilization by saturating the metal coordination sphere by intramolecular coordination through a β-diketonates with an ethereal group has was tested. Several new lead complexes with alkoxyalkyl-substituted β-diketonates, Pb(R1C(O)CHC(O)(CH2)3OR2)2(Rl=t-Bu, Me, OMe, i-Pr, R2=Me, Et), or carboxylate, Pb(OC(O)(CH2)3OEt)2, were prepared by the reaction between Pb(OAc)2 and corresponding alkoxyalkyl-substituted β-diketonates, and they were found to have a viscous liquid phase. The nature of the head (β-diketonate or carboxylate) or tails and substituents of β-diketonates appeared not to be important for the formation of the liquid phase. It is worth mentioning that Pb(OAc)2, which has limited use due to its low solubility, was successfully adopted as a starting material for the preparation of new lead complexes. Easy hydrolysis, reaction with HCl, and 13C NMR spectra indicated that tail portions were not coordinated to the metal as a copper derivative, Cu(t-BuC(O)CHC(O)(CH2)3OMe)2. All these complexes were not volatile enough for the MOCVD experiments, but a methyl derivative, Pb(MeC(O)CHC(O)(CH2)3OEt)2, showed some sublimation. The methoxy derivative, Pb(MeOC(O)CHC(O)(CH2)3OEt)2, was thermally unstable due to possible equilibrium between species coordinating with a keto oxygen atom and an ethereal atom of a methoxy group, which was confirmed by IR and 13C NMR spectra.

• Analytical Science and Technology
• /
• v.33 no.6
• /
• pp.252-261
• /
• 2020

Currently, the potentiometric titration and the high pressure liquid chromatography (HPLC) method were utilized in Korean Pharmacopoeia XII (KP XII) as well as other pharmacopoeias (USP, EP, BP) for determination of loperamide hydrochloride in raw materials and capsules, respectively. The research objective is to overcome the remaining drawbacks from current methods such as solubility of mobile phase (KP XII), less scientific approach (USP 43) or using paired-ion chromatography reagent which shows some limitations (BP2017 and other formulation monographs). The proposed method was optimized by Design of Experiment (DoE) tool to obtain the satisfied method for determination of loperamide hydrochloride. The optimal condition was performed on the common C18 column (150 mm × 4.6 mm; 5 ㎛) using isocratic elution with the mobile phase containing 40 mM of potassium phosphate monobasic (pH 3.0) and acetonitrile (56:44), at a flow rate of 0.7 mL/min. The optimized method was validated and met the requirements of the International Conference on Harmonization. The developed method was applied to determine loperamide hydrochloride in capsules and can be used to update the current monograph in KP XII.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.913-916
• /
• 2001

From 1994 the cooperation between NEU of China and MJU of South Korea for study of ReBaCuO (Re=Rare earth elements) superconductors has been carried out. The progress has been got in following projects. Critical current density ($J_c$) of YBaCuO superconductor prepared by Melting Textured Growth (MTG) was improved. In the preparation of textured YBaCuO, 20 wt.% of YBaCuO 211 phase was added, which would be climactic for the microcracks in the textured YBaCuO. The effects of the 211 phase and Ag content on the superconductivity were studied and discussed in detail. The improved $J_c$ value was reached to 8$\times$10^4 A/cm^2 (77K,0T). Single phase $YbBa_{2}Cu_{3}O_{x}$ superconductor was sintered by the traditional powder metallurgical method, and its reaction process was studied. In recent years, NdBaCuO superconductor is being performed. The behavior of $Nd_{4}Ba_{2}Cu_{2}O_{10}$(Nd422 phase) and the solid solubility, x in the superconductor $Nd_{1+x}Ba_{2-x}Cu_{3}O_{y}$ by the heat treatment in the low oxygen partial pressure (1%) or Ar at $950{\circ}C$ were investigated. The zone-melting process was used to make oriented NdBaCuO superconductor in order to increase the critical current density.

• Membrane Journal
• /
• v.23 no.1
• /
• pp.80-91
• /
• 2013

Metal-templated condensation of cyclohexanedione dioxime and phenylboronic acid in the presence of Fe(II) sulfate heptahydrate proceeds cleanly in methanol to furnish the Fe(II) clathrochelate. An organic/inorganic hybrid membranes composed of Fe(II) clathrochelate and polyethersulfone was prepared by using phase inversion method. For membrane preparation, the Fe(II) clathrochelate was highly soluble (3~5 g/L) in DMF, NMP, and DMAc, which meets the requirements for the solubility of metal complexes in polar aprotic solvent used in membrane preparation. It was stable even in the presence of strong acids, such as trifluorosactic acid (pKa = 0.3). It was characterized by UV-vis spectroscopy, and their stability in solution phase studied in the presence of (i) strong acids or (ii) competing chelates. Organic/inorganic hybrid membranes were prepared with polyethersulfone, polyvinylpyrrolidone, p-toluenesulfonic acid, Fe(II) clathrochelate and DMF by using nonsolvent induced phase inversion method. The addition of Fe(II) clathrochelate leads increase of surface pore density, mean pore size and flux. We can obtain highly asymmetric membranes by addition of Fe(II) clathrochelate.

• Journal of the Korean Society for Heat Treatment
• /
• v.20 no.1
• /
• pp.17-21
• /
• 2007

In this study, brazing characteristics of the dissimilar Ti and Cu metals using a Zr-base amorphous filler ($Zr_{41.2}Ti_{13.8}Cu_{12.5}Ni_{10.0}Be_{22.5}$ in at.%) have been investigated for various bonding temperatures. In the sample brazed at $790^{\circ}C$ for 10 min., the Ti-rich phases in the joint were observed, while the Cu-rich phases were obtained in the sample brazed at $825^{\circ}C$ for 10 min.. Such a different microstructure and composition in the joints could be explained by the degree of the dissolution reaction. At $790^{\circ}C$, the reaction between the Zr-rich liquid phase and the Ti base metal was actively occurred to form Ti-rich liquid phase in the joint. As the temperature increased to $825^{\circ}C$, however, the reaction between the Ti-rich liquid phase and the Cu base metal was promoted to form the Cu-rich liquid phase in the joint finally. Such a different interface reaction is attributed to the reactivity or solubility between the Zr as a main element in the filler and the Ti and Cu as a base metal element.