• 전자공학회논문지A
• /
• 제29A권11호
• /
• pp.62-69
• /
• 1992

In this paper, a measurement system of surface flatness test using 2-Bucket algorithm phase-shifting interferometry is designed and constructed. In the conventional surface flatness test system using phase shifting interferometry, it is needed more than 3 fringe datas but we propose 2-Bucket algorithm phase-shifting interferometry which only uses two fringe datas. 2-Bucket algorithm uses the relative phase differences of the neighbour pixels. If we watch the result of phase-shift error test simulation, 2-Bucket algorithm has the same calculating values that 3-Bucket, 4-Bucket and 5-Bucket algorithm have them. Experiments have been carried out on the silicon wafer. The measurement of silicon wafer's surface flatness shows that the flatness topography using 2-Bucket algorithm is similar to that of other algorithms.

• 한국광학회지
• /
• 제4권4호
• /
• pp.397-402
• /
• 1993

위상변이간섭법(phase-shifting interferometry)의 측정정도는 광원의 불안정성, CCD센서의 비선형성, 열팽창, 기계적 진동과 위상변이기(phase shifter)의 위치결정정도 등에 의해 영향을 받는다. 위상변이 간섭법에서 형상을 측정하기 이해 사용되는 이론적인 기준위상(theoretical reference phase)은 위상변이기의 이동오차와 광경로차에 변화를 주는 열팽창, 기계적 진동 등에 의해서 실제의 기준위상(actual reference phase)과 다르게 되고 이것은 측정에 심각한 오차를 야기시킨다. 이러한 종류의 위상측정오차를 제거하기 이해 본 연구에서는 최소자승법과 반복연산법을 사용하여 간섭무늬의 광강도로부터 직접 기준위상을 구하고, 이를 이용하여 위상을 산출하는 방법이 제안되었다.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권12호
• /
• pp.567-572
• /
• 2005

This paper presents a scheme to design optimal placement of phase-shifting transformers for power system congestion problems. A good design of phase-shifting transformers placement can improve total transfer capability in interconnected systems. In order to find the optimal placement of phase-shifting transformers, the power flows of the interesting transmission lines are evaluated using sequential quadratic programming technique. This algorithm considers power balance equations and security constraints such as voltage magnitudes and transmission line capacities. The proposed scheme is tested in 10 machines 39 buses and IEEE 57 buses systems. Test result shows that the proposed method can find the optimal placement of phase-shifting transformers to solver power system congestion problems.

• Current Optics and Photonics
• /
• 제5권2호
• /
• pp.155-163
• /
• 2021

We propose a novel optical encryption scheme for cipher-feedback-block (CFB) mode, capable of encrypting two-dimensional (2D) page data with the use of two-step phase-shifting digital interferometry utilizing orthogonal polarization, in which the CFB algorithm is modified into an optical method to enhance security. The encryption is performed in the Fourier domain to record interferograms on charge-coupled devices (CCD)s with 256 quantized gray levels. A page of plaintext is encrypted into digital interferograms of ciphertexts, which are transmitted over a digital information network and then can be decrypted by digital computation according to the given CFB algorithm. The encryption key used in the decryption procedure and the plaintext are reconstructed by dual phase-shifting interferometry, providing high security in the cryptosystem. Also, each plaintext is sequentially encrypted using different encryption keys. The random-phase mask attached to the plaintext provides resistance against possible attacks. The feasibility and reliability of the proposed CFB method are verified and analyzed with numerical simulations.

• 한국정밀공학회지
• /
• 제25권1호
• /
• pp.85-91
• /
• 2008

White light scanning interferometry has gotten a firm position in 3D surface profile measuring field. Recently, the LCD industry gave a chance for this technology to enter into real industry fields. It is known that white-light phase-shifting algorithm give a best resolution compare to other algorithms, but there are some problems to be resolved. One of them is 300nm jump in height profile, called bat-wing effect. The main reason of this problem is an ambiguity of phase-peak detection algorithm, and some solution has been proposed, but it didn't work perfectly. In this paper, I will show the cases when these effects are occurred, and these height discrepancies will be almost disappeared when broad-band illuminators are used.

• Journal of the Optical Society of Korea
• /
• 제13권2호
• /
• pp.245-250
• /
• 2009

We propose a digital holographic interference analysis method based on a 2-frame phase-shifting technique for measuring an optical mirror surface. The technique using 2-frame phase-shifting digital interferometry is more efficient than multi-frame phase-shifting techniques because the 2-frame method has the advantage of a reduced number of interferograms, and then takes less time to acquire the wanted topography information from interferograms. In this measurement system, 2-frame phase-shifting digital interferograms are acquired by moving the reference flat mirror surface, which is attached to a piezoelectric transducer, with phase step of 0 or $\pi$/2 in the reference beam path. The measurements are recorded on a CCD detector. The optical interferometry is designed on the basis of polarization characteristics of a polarizing beam splitter. Therefore the noise from outside turbulence can be decreased. The proposed 2-frame algorithm uses the relative phase difference of the neighbor pixels. The experiment has been carried out on an optical mirror which flatness is less than $\lambda$/4. The measurement of the optical mirror surface topography using 2-frame phase-shifting interferometry shows that the peak-to-peak value is calculated to be about $0.1779{\mu}m$, the root-mean-square value is about $0.034{\mu}m$. Thus, the proposed method is expected to be used in nondestructive testing of optical components.

• Journal of the Optical Society of Korea
• /
• 제10권4호
• /
• pp.178-183
• /
• 2006

An in-line phase-shifting digital holographic microscopy system was constructed by inserting a conventional microscope in the object arm of a Mach-Zehnder interferometer. It was used to measure the three dimensional shape of a micro Fresnel lens. It was also shown that both the lateral and the axial resolutions of the in-line phase-shifting system using a self-calibration algorithm were superior to those of the best off-axis system.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.230-235
• /
• 2014

Two-step quadrature phase-shifting digital holography based on the calculated intensity of a reference wave is proposed. In the Mach-Zehnder interferometer (MZI) architecture, the method only records two quadrature-phase holograms, without reference-wave intensity or object-wave intensity measurement, to perform object recoding and reconstruction. When the reference-wave intensity is calculated from the 2D correlation coefficient (CC) method that we presented, the clear reconstruction image can be obtained by some specific algorithm. Its feasibility and validity were verified by a series of experiments with 2D objects and 3D objects. The presented method will be widely used in real-time or dynamic digital holography applications.

• Current Optics and Photonics
• /
• 제7권6호
• /
• pp.673-682
• /
• 2023

In this paper, a three-key triple data encryption algorithm (TDEA) of a digital cryptosystem based on phase-shifting interferometry is proposed. The encryption for plaintext and the decryption for the ciphertext of a complex digital hologram are performed by three independent keys called a wavelength key k₁(λ), a reference distance key k₂(d_r) and a holographic encryption key k₃(x, y), which are represented in the reference beam path of phase-shifting interferometry. The results of numerical simulations show that the minimum wavelength spacing between the neighboring independent wavelength keys is about δλ = 0.007 nm, and the minimum distance between the neighboring reference distance keys is about δd_r = 50 nm. For the proposed three-key TDEA, choosing the deviation of the key k₁(λ) as δλ = 0.4 nm and the deviation of the key k₂(d_r) as δd_r = 500 nm allows the number of independent keys k₁(λ) and k₂(d_r) to be calculated as N(k₁) = 80 for a range of 1,530-1,562 nm and N(d_r) = 20,000 for a range of 35-45 mm, respectively. The proposed method provides the feasibility of independent keys with many degrees of freedom, and then these flexible independent keys can provide the cryptosystem with very high security.

• 한국자동차공학회논문집
• /
• 제5권6호
• /
• pp.202-214
• /
• 1997

In automotive industries, one of major issues is the shifting shock, which is brought out when two clutches are engaged in an automatic transmission. The engagement and disengagement if two clutches means the variation of the D.O.F(degree of freedom) of system. Therefore to analyze the shifting performance, the variation of D.O.F should be considered in detail. Generally, the programs for analyzing the shifting transients have been developed as the problem-dependent codes because the artificial maris were usually used to indicate the change of shifting phase. To develop a software applicable to a general mechanism of transmissions, a self-determining algorithm of D.O.F must be applied. Through the experiences for the last several years, a generalized analysis software of shifting mechanism(so called by POTAS-MSM Version 2.0) has been developed. In this study, some major ideas of the software and the concept for the analysis of shifting characteristics are presented. In addition to that, this paper shows how to self -determine D.O.F of he multi-slipping systems using the stick-slip criterion on a single slipping mechanism. By using this software, the shifting characteristics of a vehicle are analyzed and compared with the experimental results.