• Analytical Science and Technology
• /
• v.7 no.1
• /
• pp.25-31
• /
• 1994

As for analytes which did not represent the differences of the selectivity on the stationary and mobile phase, secondary chemical equilibrium theory was applied to study pH effects on the separation of alkylphenols. Mobile phase was consisted of an aqueous sodium carbonate-bicarbonate buffer and acetonitrile. The maximum selectivity for adjacent peak pairs was predicted from those values of $k^{\prime}_{HA}/k^{\prime}_{A-}$ and ${\Delta}pK$. The optimum pH determined by this method was 11.18 pH and solvent selectivity were considered at the same time to invoke the full range of selectivity effects possible for separations. Quaternary mixture composed of methanol, acetonitrile, tetrahydrofuran and water was adjusted to optimum pH 11.18. As the statistical simplex technique of an overlapping resolution map (ORM) was used to predict the optimized solvent system. The optimum solvent, which gives complete separation of alkylphenols, was determined as follws MeOH : ACN : THF = 14.4 : 81.8 : 2.8.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.463-468
• /
• 2021

In this paper, when a refractive index grating and a gain grating were simultaneously present in a DFB laser having a wavelength of 1.55 ㎛, a dielectric film coating was applied so that reflection did not occur on the right mirror surface, so that 𝜌_r=0. In case of 𝛿L>0, the characteristics of the oscillation frequency and oscillation gain were analyzed. When the grating phase of the left mirror surface continues to decrease from 𝜋, the graph lines of each mode gradually shift to the left. In case of 𝜅L=10, the threshold gain of the oscillation mode is the lowest. In this case, the mode selectivity is relatively low. From 𝜅L=0.5 to 𝜅L=6, the mode selectivity and the frequency stability are excellent. In the case of DFB lasers with an anti-reflection coated mirror, the threshold gain of the oscillation mode increases but the mode selectivity is about twice as excellent, compared with DFB lasers of having two cleaved facets.

• Proceedings of the Optical Society of Korea Conference
• /
• 1999.08a
• /
• pp.40-41
• /
• 1999

• Korean Journal of Environmental Agriculture
• /
• v.13 no.2
• /
• pp.209-215
• /
• 1994

Absorption, translocation, and metabolism of the herbicide alachlor in soybean, Chinese cabbage, and barnyard grass seedlings were examined and compared with each other using [phenyl-U-$^{14}C$] alachlor in search of a primary factor contributing to the selectivity of alachlor. When root of each seedling was immersed into the solution containing [$^{14}C$]alachlor, the amount of absorbed radioactivity/mg dry matter of seedling which was suggested to be correlated with the susceptibility of plants to alachlor decreased in the order of soybean ${\gg}$ Chinese cabbage ${\geq}$ barnyard grass and the rate of translocation to shoot was Chinese cabbage ${\geq}$ barnyard grass ${\gg}$ soybean. These orders did not consistently explain the selective phytotoxicity of alachlor. Analyses of extracts by reverse phase chromatography showed that alachlor was detoxified by conjugation with glutathione in all three plants and the rate of glutathione conjugation of soybean, the resistant species to alachlor, was the greatest, while that of barnyard grass, the susceptible, was the lowest among three plants. This result explained well the selective phytotoxicity of alachlor. Both absorption and translocation contribute undoubtedly to the selectivity by influencing the active internal concentration of alachlor. However, neither of them appeared to be a primary factor. It was concluded that the most important primary factor was the rate of glutathione conjugation, which detoxifies alachlor and plays an important role in selectivity.

• Journal of the Korean Chemical Society
• /
• v.31 no.2
• /
• pp.123-132
• /
• 1987

Nucleophilic substitution reactions of methylthiocyanate(MTC) with anion nucleophiles,$SH^-,\;CN^-$ and $OH^-$, have been investigated using MNDO method. For the three reaction centers of MTC, gas-phase and solution-phase selectivities are discussed for each nucleophile by considering potential energy profiles calculated(intrinsic term) and magnitudes of negative charge on the nucleophile at the transition state(solvation term). It was found that both components of the selectivity for $SH^-$agreed with the experimental results obtained for 4-methylbenzylthiocyanate (4-MBTC), but the selectivity order for TEX>$CN^-$ was found to agree only with that of the intrinsic term and that of $OH^-$disagreed with any theoretical selectivity order. The MNDO optimized geometries for all species at the stationary points are reported.

• Membrane and Water Treatment
• /
• v.2 no.4
• /
• pp.207-223
• /
• 2011

Supported Liquid Membranes (SLMs) have been widely studied as feasible alternative to traditional processes for separation and purification of various chemicals both from aqueous and organic matrices. This technique offers various advantages like active transport, possibility to use expensive extractants, high selectivity, low energy requirements and minimization of chemical additives. SLMs are not yet used at large scale in industrial applications, because of the low stability. In the present paper, after a brief overview of the state of the art of SLM technology the facilitated transport mechanisms of SLM based separation is described, also introducing the small and the big carrousel models, which are employed for transport modeling. The main operating parameters (selectivity, flux and permeability) are introduced. The problems related to system stabilization are also discussed, giving particular attention to the influence of membrane materials (solid membrane support and organic liquid membrane (LM) phase). Various approaches proposed in literature to enhance SLM stability are also reviewed. Modification of the solid membrane support, creating an additional layer on membrane surface, which acts as a barrier to LM phase loss, increases system stability, but the membrane permeability, and then the flux, decrease. Stagnant Sandwich Liquid Membrane (SSwLM), an implementation of the SLM system, results in both high flux and stability compared to SLM. Finally, possible large scale applications of SLMs are also reviewed, evidencing that if the LM separation process is opportunely carried out (no production of byproducts), it can be considered as a green process.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2405-2408
• /
• 2007

Oxidation of alkylaromatics including toluene and p-methoxytoluene has been carried out over alkali metal (AM)-containing catalysts such as AM-V/TiO2 and AM-VSb/Al2O3 in vapor-phase using oxygen as an oxidant. The selectivity for partial oxidations increases with incorporation of an alkali metal or with increasing the basicity of alkali metals (from Na to Cs), irrespective of the supports or reactants. However, the conversion is nearly constant or slightly decreasing with the addition of alkali metals in the catalyst. The increased selectivity may be related with the decreased acidity even though more detailed work is necessary to understand the effect of alkali metals in the oxidation. The AM-VSb/Al2O3 may be suggested as a potential selective catalyst for vapor-phase oxidations.

• Journal of Hydrogen and New Energy
• /
• v.15 no.2
• /
• pp.119-128
• /
• 2004

DME(Dimethyl Ether) was directly produced from the synthesis gas using the slurry phase reactor. The catalyst for DME production prepared two types (A type; Cu:Zn:Al=57:33:10, B type; Cu:Zn:Al=40:45:15, molar ratio). It was evaluated for the effect of the reaction medium oil using the small size slurry phase reactor. DME production yield and the methanol selectivity decreased in the order: n-hexadecane oil> mineral oil> therminol oil. The long-term test of DME production was carried out using A and B type catalyst, and n-hexadecane oil and mineral oil, respectively. It was confirmed that the use of A type for the catalyst and n-hexadecane for the reaction medium oil was very useful for the viewpoint of the DME production form the synthesis gas.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.251-252
• /
• 2006

A development of surface acoustic wave gas sensor to detecting volatile gas has been observed by monitoring output signal as function of time onto the network analyzer. The SAW sensor with a center frequency of 200MHz was fabricated on $42^{\circ}$ S-T Quartz substrates. Using the gas chromatography column has been selectivity. Experimental results, which show the phase change of output signal under the absorption of volatile gas onto sensors, were presented. The proposed sensor has the properties of high sensitivity compare to the conventional SAW gas sensor and chemical selectivity. Thus, it is thought these results are applicable for use in sensor array of an high performance electronic nose system.

• KSBB Journal
• /
• v.17 no.2
• /
• pp.207-211
• /
• 2002

The theophylline imprinted membrane was prepared by a wet phase inversion method. Theophylline was implanted during copolymerization of acrylonitrile with acrylic acid or implanted in the dimethyl sulfoxide solution containing10 wt% copolymer, p(AN-co-AA). Rolling the glass plate, on which the copolymer solution was cast, in water removed the sponge layer and thus made the membrane symmetric. The adsorption selectivity of the membrane toward template molecule was increased with the coagulation temperature of the membrane and the initial concentration of the theophylline and caffeine mixture.