• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.55-61
• /
• 2021

In this paper, we proposed and implemented defect detection methods of polarized film with half-wave phase retardation plates. We investigated the principles of phase retardation compensation and optical principle of half-wave phase retardation plates. We analyzed of samples of polarized film with half-wave phase retardation plates. The optical defect detection methods are proposed and the performance is validated with experiments.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.115-119
• /
• 2001

Contaminant retardation factor is derived from the colloidal and contaminant transport equations for a four-phase porous medium: an aqueous phase, two mobile colloidal phases, and a solid matrix. It is assumed that the contaminant sorption to solid matrix and colloidal particles and the colloidal deposition on solid matrix follow the linear isotherms. The behavior of the contaminant retardation factor in response to the change of model parameters is examined employing the experimental data of Magee et al. (1991) and Jenkins and Lion (1993). In the four-phase system, the contaminant retardation factor is determined by both the contaminant association with solid matrix and colloidal particles and the colloidal deposition on solid matrix. The contaminant mobility is enhanced when the affinity of contaminants to mobile colloids increases. In addition, as the affinity of colloids to solid matrix decreases, the contaminant mobility increases.

• 마이크로전자및패키징학회지
• /
• 제30권3호
• /
• pp.78-82
• /
• 2023

본 연구에서는 Reactive mesogen (RM) 기반 λ/2 위상지연 필름과 편광필름을 이용하여 3단계로 투과율 가변이 가능한 스마트윈도우 제조 기술을 제안한다. λ/2 위상지연 필름은 위상차 (Γ) 값이 π (Δn·d=λ/2)이며, 위상지연 필름에 입사된 빛의 진행방향을 필름의 광축에 대칭된 각도로 변환시키는 특징이 있다. 위상지연 필름의 Δn·d 값이 λ/2에 근접할수록 변환 특성이 우수하기 때문에 본 연구에서는 복굴절 물질인 RM 두께별 retardation (Δn·d) 특성 평가를 통해 Δn·d가 λ/2(=275 nm@550 nm)에 근접한 276.1 nm의 값을 갖는 위상지연 필름을 제작하였다. 최종적으로 (편광필름)/(유리기판)/(배향막)/(λ/2 retardation film) 구조의 스마트윈도우를 제작하여 투과모드, 반투과모드, 차단모드에서의 광 투과 특성을 평가하였다. 평가결과 투과율은 각각 35.8%, 27.8%, 18.2%의 값을 나타내었으며, 이를 통해 λ/2 위상지연 필름을 이용하여 3단계로 투과율 제어 가능함을 확인하였다. 또한 150×200 mm² 크기의 스마트윈도우를 구현함으로써 건축물, 자동차 등 다양한 분야의 활용 가능성을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제17권3호
• /
• pp.305-310
• /
• 2004

We have studied the optimal phase retardation value of a homogeneously aligned liquid crystal (LC) driven by fringe-field when using the LC with positive dielectric anisotropy. In general, the transmittance of a homogeneous aligned LC cell under crossed polarizer is maximum when a twist angle of LC by in-plane rotation is 45$^{\circ}$ with polarizer and the cell retardation becomes λ/2. However, the device using the LC with positive dielectric anisotropy does not follow this since the degree of rotation of the LC is dependent on electrode position and in addition the LCs tilt up along the fringe-field. At the center of common and pixel electrode, the LC is most twisted around a middle position of a cell whereas at the edge position of pixel electrode, the LC is most twisted near bottom surface of a cell. Consequently, the optimal phase retardation of the device becomes much larger than λ/2 and the transmittance can be described using the combination of the in-plane switching and twisted nematic mode.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 INTERNATIONAL SYMPOSIUM ON SOIL & GROUNDWATER ENVIRONMENT
• /
• pp.62-63
• /
• 2005

• 마이크로전자및패키징학회지
• /
• 제29권4호
• /
• pp.29-34
• /
• 2022

위상지연 필름을 이용하여 가시광선 투과도 제어가 가능한 스마트윈도우 제작 기술을 제안한다. 위상지연 필름의 phase retardation(𝚪)이 𝛑/2(𝚫n·d = 𝛌/4)인 경우 선편광을 원편광으로 변환시켜줄 수 있으며, 서로 다른 배향각도를 갖는 두 장의 𝛌/4 위상지연 필름을 이용하여 광투과 모드(45°/-45°)와 광차단 모드(45°/45°) 제어가 가능한 스마트윈도우를 제작할 수 있다. 본 연구에서는 복굴절 물질인 reactive mesogen (RM)의 두께에 따른 retardation 특성(𝚫n·d)을 평가함으로써 𝚫n·d가 𝛌/4인 위상지연 필름을 제작하였다. 서로 다른 𝚫n·d 값을 갖는 위상지연 필름이 적용된 스마트윈도우의 광차단 특성을 평가한 결과, 𝛌/4 위상지연 필름 기반의 스마트윈도우에서 가장 높은 광차단율(≥20%)을 보였다. 이를 통해 𝚫n·d의 값이 𝛌/4 일 때 위상지연 효과가 가장 높다는 것을 확인하였으며, 𝛌/4 위상지연 필름을 적용하여 150×150 mm² 크기의 스마트윈도우를 구현하였다.

• 대한물리의학회지
• /
• 제3권2호
• /
• pp.113-119
• /
• 2008

Purpose : In this case report, we demonstrated the improvement of gait ability on the child who has mental retardation with incomplete gait pattern. Methods : The subject was a 4 years old boy with mental retardation. We applied the Bobath approach to the subject. Treatments included to facilitate trunk alignment and stability, and to train weight bearing and shifting, to facilitate pelvis posterior-anterior movement, and to train walk especially stance phase and assist up-down stairs locomotion in environment similar to actual daily life. It was performed 24 sessions for 12 weeks. Results : With this treatment, he could accomplish dynamic standing stability and he could independent walk at the out door after 12 weeks. In gross motor function measure(GMFM), total motor function was improved to 85.6% from 75.7%. Conclusion : The gait ability of child with mental retardation was improved by using the bobath approach.

• Corrosion Science and Technology
• /
• 제5권6호
• /
• pp.189-195
• /
• 2006

Effects of tungsten (W) on the precipitation kinetics of secondary phases and the associated resistance to pitting corrosion of 25%Cr duplex stainless steels were investigated through microstructural and electrochemical noise analyses. With the partial substitution of W for Mo in duplex stainless steel, the potential and current noises of the alloy were significantly decreased in chloride solution due to retardation of the ${\sigma}$ phase precipitation. The preferential precipitation of the $\chi$ phase in the W-containing alloy during the early period of aging contributed to retarding the precipitation of the $\sigma$ phase by depleting W and Mo along grain boundaries. In addition, the retardation of the nucleation and growth of the $\sigma$ phase in the W-containing alloy appears to be attributed to the inherently low diffusivity of W compared with that of Mo.

• Journal of Information Display
• /
• 제10권1호
• /
• pp.19-23
• /
• 2009

In this paper, we review the proposed liquid crystal display (LCD) with a tunable viewing angle consisting of a conventional liquid crystal display (LCD) panel and a thermally variable retardation layer (TVRL) characterized by uniformly aligned LC film with transparent indium-tin-oxide electrodes for Joule heating. In the TVRL, nematic phase is transitioned into isotropic by Joule heating. The numerical calculation showed that the intrinsic wide viewing angle was achieved at the isotropic phase of the TVRL by Joule heating, whereas the narrow viewing angle was obtained at the nematic phase of the TVRL. The simulated and experimental results of the proposed LCD show continuous and symmetrical viewing angle characteristics by tuning the retardation of TVRL using Joule heating. The structure of the viewing angle control proposed here is adoptable to all LCD modes with wide viewing angle characteristics.

• 한국전기전자재료학회논문지
• /
• 제25권3호
• /
• pp.209-212
• /
• 2012

In this paper, we have studied on the optimal design of the optical compensation film for the TN-LCDs. To have wide viewing angle panels, several methods such as multi-domain method, optical path method, and phase compensation method have been proposed. Among these methods, this paper focused on the phase compensation method. In the phase compensation method, the phase retardation generated from the optical birefringence for the off-axis incident is compensated by using optical films with refractive anisotropy. To compensate the phase retardation of the TN-LCDs, we have proposed design concept for the biaxial optical films and analyzed the optical performance for the proposed structures. The calculation of the dynamic motion of the liquid crystals was based on the Ericksen-Leslie theory and the optical performance of the TN-LCD was calculated from the Extended Jones Matrix Method. From the results, we have confirmed that the optical characteristics of the TN-LCDs with the biaxial films have been improved considerably compared with the TN-LCDs compensated by the combination of the uniaxial films.