• Geophysics and Geophysical Exploration
• /
• v.20 no.1
• /
• pp.18-24
• /
• 2017

We performed seismic imaging based on relative S-wave travel times to examine S-wave velocity of upper mantle structure beneath East Asia. We used teleseismic events recorded at 129 broadband stations of the Korea Institute of Geoscience and Mineral Resources (KIGAM), Korea Meteorological Administration (KMA), and National Research Institute for Earth Science and Disaster Prevention (NIED). Relative travel time residuals were obtained by a multi-channel cross-correlation method designed to automatically determine accurate relative phase arrival times. The resulting images show high-velocity anomalies along plate boundaries around the Japanese islands region. These anomalies may indicate subducting Pacific and Philippine Sea plates. On the other hand, a low-velocity anomaly is revealed beneath east of the Korean peninsula down to around 300 km depth, which is thought to be related to the formation of the Ulleung basin and the Ulleung island. Low-velocity anomalies revealed beneath the Jeju island may imply that the formation and volcanism of the Jeju island have been caused by magmatic sources from the deep mantle.

• Mycobiology
• /
• v.44 no.3
• /
• pp.162-170
• /
• 2016

In this paper, we demonstrate the ability of Arabidopsis thaliana to detect different mixtures of volatile organic compounds (VOCs) emitted by the common indoor fungus, Aspergillus versicolor, and demonstrate the potential usage of the plant as a bioindicator to monitor fungal VOCs in indoor air. We evaluated the volatile production of Aspergillus versicolor strains SRRC 108 (NRRL 3449) and SRRC 2559 (ATCC 32662) grown on nutrient rich fungal medium, and grown under conditions to mimic the substrate encountered in the built environment where fungi would typically grow indoors (moist wallboard and ceiling tiles). Using headspace solid phase microextraction/gas chromatography-mass spectrometry, we analyzed VOC profiles of the two strains. The most abundant compound produced by both strains on all three media was 1-octen-3-ol. Strain SRRC 2559 made several terpenes not detected from strain SRRC 108. Using a split-plate bioassay, we grew Arabidopsis thaliana in a shared atmosphere with VOCs from the two strains of Aspergillus versicolor grown on yeast extract sucrose medium. The VOCs emitted by SRRC 2559 had an adverse impact on seed germination and plant growth. Chemical standards of individual VOCs from the Aspergillus versicolor mixture (2-methyl-1-butanol, 3-methyl-1-butanol, 1-octen-3-ol, limonene, and ${\beta}-farnesene$), and ${\beta}-caryophyllene$ were tested one by one in seed germination and vegetative plant growth assays. The most inhibitory compound to both seed germination and plant growth was 1-octen-3-ol. Our data suggest that Arabidopsis is a useful model for monitoring indoor air quality as it is sensitive to naturally emitted fungal volatile mixtures as well as to chemical standards of individual compounds, and it exhibits relatively quick concentration- and duration-dependent responses.

• Korean Journal of Veterinary Service
• /
• v.32 no.3
• /
• pp.281-286
• /
• 2009

Fluoroquinolones in muscle and egg were separated by liquid extraction and determined. The analysis was carried out using following conditions; C18 column ($150{\times}4.6mm$, $5{\mu}m$), mobile phase composed of D.W. (containing 0.4% triethylamine and phosphoric acid) : methanol : acetonitrile (780:100:120, v/v/v), quarternary pump at a flow rate of 0.9ml/min and $20{\mu}l$ of injection volume, fluorescence detector with EX 278nm/Em 456nm. The calibration range of seven fluoroquinolones showed linearity ($r^2{\geq}0.999$) at concentration range of $0.025{\sim}0.8{\mu}g/ml$. The recoveries in fortified muscle and egg represented more than 81.3%. The detection limits for ofloxacin, norfloxacin, ciprofloxacin, enrofloxacin, danofloxacin, saraloxacin and orbifloxacin were 3.1, 2.5, 3.6, 1.7, 0.9, 2.5 and $2.1{\mu}g/kg$, respectively. We also monitored fluoroquinolones residue in the sample (chicken muscle 182, cattle muscle 140, pig muscle 139, egg 212) using EEC-plate (E. coli ATCC 11303) screening and HPLC confirmation methods. The screening test results, fluoroquinolones, antibacterial substances were all negative.

• Advances in Traditional Medicine
• /
• v.10 no.4
• /
• pp.304-309
• /
• 2010

Scutellaria pinnatifida A. Hamilt. (Lamiaceae) is an endemic Turkish herb. This plant is also endemic to Iran, and grows abundantly in other central and western Asian countries. Several species of the Scutellaria are known for their traditional uses in the treatment of hypertension, arteriosclerosis, inflammatory diseases, hepatitis, allergy, cancer and diarrhoea. Free-radical-scavenging property, antibacterial activity and brine shrimp toxicity of the n-hexane, dichloromethane (DCM) and methanol (MeOH) extracts of S. pinnatifida were assessed using the 2,2-diphenyl-1-picryl-hydrazyl (DPPH) assay, the resazurin microtitre plate based assay, and the brine shrimp lethality assay, respectively. The DCM and MeOH extracts exhibited free-radical-scavenging property, with the $RC_{50}$ values of 0.362 and 0.127 mg/ml, respectively. Among the solid-phase extraction fractions of the MeOH extract, the 50% aqueous-MeOH fraction showed the highest level of free-radicalscavenging activity ($RC_{50}$ = 0.039 mg/ml). While the DCM extract showed low level of antibacterial activity against Bacillus subtilis and ampicillin-resistant Escherichia coli, the MeOH extract was active against B. cereus, B. subtilis, E. coli and ampicillin-resistant E. coli. However, the minimum inhibitory concentrations (MIC) of the MeOH extract against these bacterial strains were >10 mg/ml. None of the extracts showed any significant toxicity towards brine shrimps ($LD_{50}$ = > 1.00 mg/ml).

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1706-1713
• /
• 2020

Functionally gradient material (FGM) is promisingly effective in mitigating the thermal stress between plasma facing materials (PFM) and structural materials. However, the corresponding research with respect to W/V FGM has not been reported yet. In this work, we firstly report the successful fabrication of W/V FGM by a combined technology of mechanical alloying (MA) and spark plasma sintering (SPS). The microhardness and microstructure of the consolidated sample were both investigated. W/V stacks show significantly enhanced microhardness (>100%) compared with pure W plate, which is beneficial to the integral strength of the hybrid structure. Furthermore, we clarify that the different ductility of W and V should be carefully considered, otherwise W/V powder might aggregate and lead to the formation of compositional segregation, and simultaneously unmask the impact of V proportion on the distribution of second phase in W-V binary alloy system. This work provides an innovative approach for obtaining W-V connections with much better performance.

• Journal of the Korean Ceramic Society
• /
• v.42 no.8 s.279
• /
• pp.567-574
• /
• 2005

Densification of SiC powder with additives of total amount of2, 4, 8 $wt\%$ Al-B-C was carried out by Spark Plasma Sintering (SPS). The unique features of the process are the possibilities of a very fast heating rate and a short holding time to obtain fully dense materials. The heating rate and applied pressure were kept at $100^{\circ}C/min$ and 40 MPa, while the sintering temperature and holding time varied from 1700 - $1800^{\circ}C$ for 10 - 40 min, respectively. The SPS-sintered specimens with different amount of Al-B-C at $1800^{\circ}C$ reached near-theoretical density. The $3C{\rightarrow}6H,\;15R{\rightarrow}4H$ phase transformation of SiC was enhanced by increasing the additive amount. The microstructure of SiC sintered up to $1750^{\circ}C$ consisted of fine equiaxed grains. In contrast, the growth of large elongated grains in small matrix grains was shown in sintered bodies at $1800^{\circ}C$, and the plate-like grains interlocking microstructure had been developed by increasing the holding time at $1800^{\circ}C$. The grain growth rate decreases with increasing amount of Al-B-C in SiC starting powder, however, the both of volume fraction and aspect ratio of large grains in sintered body increased.

• Journal of Periodontal and Implant Science
• /
• v.25 no.2
• /
• pp.181-191
• /
• 1995

The ability of fibroblasts attach to teeth is of paramount imporance in re-establishing the lost connective tissue attachment after periodontal therapy. Tobacco contains a complex mixture of substances including nicotine. various nitrousamines, trace elements. and a variety of poorly characterized substances. The effects of nicotine on fibroblasts have reported an altered morphology and attachment of fibroblasts to substrates and disturbances in protein synthesis and secretion. This study examined the effect of nicotine, a major component of the particulate phase of tobacco smoke, on human gingival fibroblasts and periodontal ligament cells attachment to tissue culture surfaces and cellular activity of human gingival fibroblasts and periodontal ligament cells. Pooled human gingival fibroblasts made from extraction of 3rd molar were utilized between passage 4 and 5 and plated in 96 well plate at 20,000 cells per well. Cell number were determined using 3-(4,5-dimethylthiazole-2-y)2,5-diphenyltetrazolium bromide(MTI) , which is reflection of mitochondrial dehydrogenase activity. The concentration of nicotine used were 0.025, 0.05, 0.1, 0.2 and $0.4{\mu}M$, the average serum concentration for a smoker being approximately $0.1{\mu}M$. The results were as follows : 1. Attachment effects of nicotine on human gingival fibroblasts and periodontal ligament cells Excepts of $0.4{\mu}M$, the effects on attachment with increasing numbers of cells attaching with increasing nicotine concentrations, compared to control group. But over the 60min, return to control value. 2. The effect of cellular activity on human gingival fibroblasts and periodontal ligament cells. The cellular activity of human gingival fibroblasts and periodontal ligament cells were similar or decrease to control value at 1st incubation day. At 2nd incubation day, 0.05, 0.1, 0.2, $0.4{\mu}M$ concentrations were statistically different from control value on gingival fibroblasts group. But at 3rd incubation day, cellular activities of all experimental group were significantly decrease than control group.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.9
• /
• pp.1165-1173
• /
• 1997

The steady state close-contact melting phenomenon occurring between a phase change material and an isothermally heated flat plate with relative motion is investigated analytically, in which the effects of vertical convection in the liquid film and solid-liquid density difference are incorporated simultaneously. Not only the scale analysis is conducted to estimate a priori qualitative dependence of system variables on characteristic parameters, but also an analytical solution to a set of simplified model equations is obtained to specify the effects under consideration. These two results are consistent with each other, in that the vertical convection affects both the solid descending velocity and the film thickness, and that the density difference alters only the solid descending velocity. While the effect of vertical convection can be characterized conveniently by a newly introduced temperature gradient factor which asymptotically approaches the unity/zero with decreasing/increasing the Stefan number, that of density difference is represented by the liquid-to-solid density ratio. It is shown that the solid descending velocity depends linearly on the density ratio, and that the ratios of solid descending velocity, film thickness and friction coefficient to the conduction solution are proportional to 3/4, 1/4 and -1/4 powers of the temperature gradient factor, respectively. Also, established is the fact that the effect of convection can be legitimately neglected in the analysis for the range of the Stefan number less than 0.1.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.25 no.4 s.34
• /
• pp.123-131
• /
• 1999

Liquid crystal known as a rheological barrier to coalescence of oil droplets, increases emulsion stability, water-holding capacity and promotes active material penetration to skin. Some investigation for its rheological characteristics have been reported but its relations to consumer perception have been rarely published. In this study, oil/water emulsion and oil/liquid crystal/water systems were manufactured using the same composition or Behenyltrimethylammonium chloride/Cetostearyl alcohol/Lanolin oil. and rheological properties or each system were investigated with Cone and Plate rheometer. The formation of liquid crystalline phase was observed with polarized microscope and Differential Scanning Calorimeter. Continuous shear experiment, creep, yield and water holding capacity were measured for oil/water and oil/liquid crystal/water systems. The results were compared with sensory evaluations. Oil/liquid crystal/water system showed higher,viscosity at the same shear rate. higher viscoelasticity and higher yield stress than oil/water system. These properties were expected to show good spreadability and excellent richness without waxiness in hair can: products of creme type. This expectation was consistent with the results of sensory experiments. Water-holding capacity was evaluated by measuring residual water of specimens at specific temperature and relative humidity. Oil/liquid crystal/water system was proved to have higher ability to hold water in comparison with oil/water system. The results indicated that oil/liquid crystal/water system was of benefit to rheological properties creme type hair care products.

• Biomolecules & Therapeutics
• /
• v.22 no.5
• /
• pp.445-452
• /
• 2014

The purpose of this study was to investigate the therapeutic effects of DA-9801, an optimized extract of Dioscorea species, on diabetic peripheral neuropathy in a type 2 diabetic animal model. In this study, db/db mice were treated with DA-9801 (30 and 100 mg/kg, daily, p.o.) for 12 weeks. DA-9801 reduced the blood glucose levels and increased the withdrawal latencies in hot plate tests. Moreover, it prevented nerve damage based on increased nerve conduction velocity and ultrastructural changes. Decrease of nerve growth factor (NGF) may have a detrimental effect on diabetic neuropathy. We previously reported NGF regulatory properties of the Dioscorea genus. In this study, DA-9801 induced NGF production in rat primary astrocytes. In addition, it increased NGF levels in the sciatic nerve and the plasma of type 2 diabetic animals. DA-9801 also increased neurite outgrowth and mRNA expression of Tieg1/Klf10, an NGF target gene, in PC12 cells. These results demonstrated the attenuation of diabetic peripheral neuropathy by oral treatment with DA-9801 via NGF regulation. DA-9801 is currently being evaluated in a phase II clinical study.