• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.04a
• /
• pp.1-4
• /
• 1995

The microstructure of polymer membranes produced via thermally induced phase separation (TIPS) of polymer solutions is a strong function of both the early-stage (by spinodal decomposition or nucleation & growth) and the late-stage phase separation (referred to in general as coarsening). In the case of early stage effects, the membrane morphology resulting from a nucleation & growth mechanism is either a poorly interconnecsed, stringy, beady structure which is mechanically fragile or a well interconnected structure with highly nonuniform pore sizes. In contrast, spinodal decomposition results in a well interconnected, mechanically strong membrane with highly uniform pore sizes. Here I describe recent quantitative studies of the coarsening effects on the microstructure of membranes produced via TIPS process. The dependence of microstructure on coarsening time, quench depth, solution viscosity, and polymer molecular weight was investigated in order to distinguish among three possible coarsening mechanisms, Ostwald ripening, coalescence, and hydrodynamic flow, which may be responsible for structural evolution after the early-stage phase Separation (spinodal decomposition or nucleation & growth).

• Korean Journal of Animal Reproduction
• /
• v.20 no.3
• /
• pp.307-313
• /
• 1996

This study was conducted to investigate the effect of S-phase synthronized nuclear transfer on the development of nuclear transplant bovine embryos. A blastomere derived from the 16~32 cell stage bovine embryos was transferred into an enucleated metaphase II(MII) oocytes or activated S-phase eggs. From the MII-phase and S-phase nuclear transfer, 6.3%(4/63) and 13.8%(9/65) of nuclear transplant embryos developed to the blastocyst stage, respectively. In the S-phase nuclear transfer, maximal proportion of embryos developed to the blastocyst stage(16.6%) was obtained after the recipient cell was activated 8 h prior to receving a donor nucleus. MII-phase nuclear transplant embryos showed the PCC state of their nuclear at 1.5~2 h after fusion, whereas, S-phase nuclear transplant embryos did not undergo PCC. The result of this study suggests that if blastomeres of unknown cell-cycle-stage are used, S-phase nuclear transplantation through the activation of enucleated oocytes prior to fusion enhances development of nuclear transplant embryos. This result also suggests that the interval time from oocyte activation to cell fusion may affect the development of nuclear transplant embryos.

• Korean Journal of Animal Reproduction
• /
• v.20 no.2
• /
• pp.143-153
• /
• 1996

To improve the efficiency of nuclear transplantation in the rabbit, this study were evaluated the influence of celly cycle of donor nuclei on the in vitro developmental potential in the nuclear transplant embryos. The embryos of 16-cell stage were collected from the mated does at 48h post-hCG injection and they were synchronized to G1 phase of 32-cell stage. Synchronization of the cell cylce of blastomeres were induced, first, using an microtubules polymerization inhibitor, 0.5$\mu\textrm{g}$/ml colcemid for 10h to arrest blastomeres in metaphase, and secondly, using a DNA synthesis inhibitor, 0.1$\mu\textrm{g}$/ml aphidicolin for 1.5 to 2h to cleave to 32-cell stage and arrest them in G1 phase. The separated G1 phase blastomeres of 32-cell stage were injectied into enucleated recipient cytoplasms by micromanipulation. After culture until 20h post-hCG injection, the nuclear transplant oocytes were electrofused and activated by electrical stimulation. The nuclear transplant embryos were co-cultured for 120h. In vitro cultured embryos were monitored every 24h to assess for development rate. After in vitro cultue for 120h, the nuclear transplant embryos developed to blastocyst stage were stained with Hoechst 33342 dye for counting the number of blastomeres under a fluorescence microscopy. The cleavage rate of blastomeres from 16-cell stage stage rabbit embryos treated with colcemid for 10h or aphidicolin for 6h following colcemid for 10h were not significantly different. The electrofusion rate was similar by high in S and G1 phase donor nuclei as 80.6 and 79.1%, respectively. However, the nuclear transplant embryos using G1 phase donor nuclei were developed to blastocyst at high rate(60.3%) than those using S phase donor nuclei(26.0%). Moreover, the mean blastocyst stage were increased significantly(P<0.05) with the G1 phase donor nuclei(176.6 cells and 1.50 cycles), as compared with the S phase donor nuclei(136.6 cells and 1.42 cycles). These results show that the blastomeres of G1 phase were more successful as donor nuclei in the nuclear transplant procedure, compared with S phase.

• Journal of Power Electronics
• /
• v.17 no.5
• /
• pp.1338-1348
• /
• 2017

In this study, a modified ripple correlation control (RCC) maximum-power point-tracking (MPPT) algorithm is proposed for a single-stage single-phase voltage source inverter (VSI) on a grid-connected photovoltaic system (GCPVS). Unlike classic RCC methods, the proposed algorithm does not require high-pass and low-pass filters or the increment of the AC component filter function in the voltage control loop. A simple arithmetic mean function is used to calculate the average value of the photovoltaic (PV) voltage, PV power, and PV voltage ripples for the MPPT of the RCC method. Furthermore, a high-accuracy and high-precision MPPT is achieved. The performance of the proposed algorithm for the single-stage single-phase VSI GCPVS is investigated through simulation and experimental results.

• Communications for Statistical Applications and Methods
• /
• v.26 no.2
• /
• pp.163-173
• /
• 2019

Simon's two-stage designs are frequently used in phase II single-arm trials for efficacy studies. A concern of safety studies is too many patients who experience an adverse event. We show that Simon's two-stage designs for efficacy studies can be similarly used to design a two-stage safety study by modifying some of the design parameters. Given the type I and II error rates and the proportion of adverse events experienced in the first stage cohort, we prescribe a procedure whether to terminate the trial or proceed with a stage 2 trial by recruiting additional patients. We study the relationship between a two-stage design with a safety endpoint and an efficacy endpoint as well as use simulation studies to ascertain their properties. We provide a real-life application and a free R package gen2stage to facilitate direct use of two-stage designs in a safety study.

• Journal of Embryo Transfer
• /
• v.12 no.1
• /
• pp.1-10
• /
• 1997

The present study was conducted to investigate the influence of embryo cell stage at 18h post-fusion and oocyte preactivation on sebsequent in vitro developmental potential in the nuclear transplant rabbit embryos. The embryos of 16-cell stage were collected and synchronized to G$_1$ phase of 32-cell stage. The recipient cytoplasms were obtained by removing the first polar body and chromosome rnass from the oocytes collected by non-dis-ruptive microsurgery procedure. The separated G$_1$ phase blastomeres of 32-cell stage were injected into non-preactivated recipient cytoplasms. Otherwise, the enucleated recipient cytoplasms were preactivated by electrical stimulation at 18h post-hCG injection and the separated G$_1$ phase blastomeres of 32-cell stage were injected. Mter culture until 20h post-hOG injection, the nuclear transplant oocytes were electrofused by electrical stimulation. The fused nuclear transplant embryos were classified into 3~4-cell, 2-cell and 1-cell stage at 18 hrs post-fusion and cultured until the embryos reached blastocyst stage. The developmental rate to blastocyst stage was significantly (P <0.05) higher in all the reconstituted embryos of 3~4-cell stage(58.0%) than in 2 and icell stage. The developmental rate to blastocyst stage in the embryos of 3~4-cell stage at 18 hrs post-fusion was significantly (P<0.05) higher in the reconstituted without oocyte preactivation(77.8%) than in the oocyte-preactivated embryos (33.3%). These results indicated that the higher rate of in the in vitro development to blastocyst stage might be obtained form the embryos which were reconstituted with nuclear donor of G$_1$ phase and non-preactivated oocyte, and developed more rapidly for 18 hrs post-fusion.

• Journal of Veterinary Clinics
• /
• v.9 no.1
• /
• pp.323-332
• /
• 1992

The present study was carried out to examine the effect of oviduct epithelium and its conditioned medium on e development of early bovine embryos in vitro. Oocytes obtained from ovarian follicles of slaughtered cows were cultured in TCM199 with 10% fetal calf serum for 22-24hrs and then fertillzed in vitro using frozen-thawed semen treated with BO-caffein, BO-BSA(20mM heparin added). Oviduct epithelium was collected in each stage of the estrus cycle and conditioned medium was the medium in which oviduct epithelium in early luteal stage was cultured. In vitro fertilized bovine embryos of 1～2 cell were co-cultured with oviduct epithelium from different estrus cycles, cultured in conditioned medium, and cultured in rabbit oviduct. The cleavage rates of in vitro fertilized early bovine embryos co-cultured with oviduct epithelial cell from early luteal, luteal and follicular phase of estrus cycle(67.2～70.8%) and cultured in conditioned medium(56.7%) were significantly(p<0.05) higher than that of the control(44.2%) The rate of development to morula or blastocyst stage in oviduct epithelial cell co-culture(15.3～32.5%) from three phase of estrus cycles and conditioned medium(14.5%) were significantly(p<0.05) higher than that of the control(5.2%). The oviduct epithelial cell from early luteal phase gave a significantly( p<0.05) higher rate of development to morula or blastocyst stage than both luteal and follicular phase. The results of in vivo culture in rabbit oviduct of early bovine embryos were 52.1% for the cleavage rate and 26.7% for the rate of development to morula or blastocyst stage.

• Journal of Technology Innovation
• /
• v.5 no.2
• /
• pp.126-154
• /
• 1997

This paper addresses a methodology for monitoring the first phase('92-94') progress and its implication fo Highly Advanced National R&D Projects (HAN or G7 project) in Korea. The authors suggest a three-stage life cycle model for the management of national R&D program; planning stage, implementing & monitoring stage, and evaluating & harvesting stage. The interim evaluation, the main focuses of this paper, is one of the key issues for the effective management of national R&D program at the implementing & monitoring stage. The conceptual framework of the interim evaluation was developed both through reviewing related literature and considering the characteristics of the HAN program. A stepwise procedure of interim evaluation was introduced: 'initial screen' and 'detailed examination'. At initial screen all 11 projects were reviewed in terms of both their relevance and performance in order to decide whether further detailed scrutiny is needed or not. If there exist critical problems on the relevance or on the intermediate progress of each project, it is to be under further detailed examination. Evaluation was initiated by the G7 Planning and Evaluation Committee, which was established for advising, directing, and monitoring the HAN Projects, with the help of large number of experts from industries, universities, and research institutes. The monitoring results were reported to the related ministries and project coordinating agencies, and reflected in the second phase.

• Membrane Journal
• /
• v.7 no.2
• /
• pp.49-56
• /
• 1997

In order to understand the formation of polymeric membranes or microcellular foams, phase separation phenomena in polymer solutions should be understood. The present review examines the progress made in the understanding of these phenomena, with emphasis on selected polymer-solvent systems. In the case of polymer-solvent systems, coarsening is of particular importance as it may come to dominate or overshadow spinodal decomposition effects within the first minute or few minutes of phase separation. In this article, some of the most important theoretical models of late stage of phase separation are reviewed, and recent experimental studies on coarsening in polymer-solvent systems are studied.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.3
• /
• pp.473-480
• /
• 2010

This study examined the different meal duration expectations and dining characteristics of customers each stage of service (order, cook, check), and investigated the impact of perceived meal duration on customers' satisfaction. The procedures consisted of four phases. During the first phase, the different meal duration expectations and dining characteristics of customers of an Italian restaurant in Seoul were examined by survey at each stage of service. The second phase investigated the impact of perceived meal duration on customer' satisfaction. The third phase compared perceived meal duration and actual meal duration. The last phase suggested appropriate meal duration for maximization of customer' satisfaction. We also examined the effects of meal time (lunch or dinner) on meal duration preferences. Customer satisfaction was decreased with longer perceived meal duration for the order and check stages and too short perceived meal duration for the cook stage. To determine appropriate meal duration for each service stage, the relationship between perceived and actual meal durations was examined. This study confirms that customers dining at restaurants preferred a longer cook time and that a shorter meal duration at dinner decreased satisfaction ratings more when compared to lunch.