• Korean Chemical Engineering Research
• /
• 제40권6호
• /
• pp.703-708
• /
• 2002

본 연구는 초임계 용매인 $CO_2$, 에틸렌, 프로판, 부탄, 프로필렌, 1-부텐, 디메틸에테르 및 $CHClF_2$내에서 poly(propyl acrylate)와 poly(propyl methacrylate) 용액과의 고압 상거동을 측정하였다. 초임계 용매들과 poly(propyl acrylate) 및 poly(propyl methacrylate)간의 상거동 측정 범위는 온도 $23-186^{\circ}C$와 압력 2,400 bar까지 실험하여 나타내었다. poly(propyl acrylate)-$CO_2$ 혼합물은 약 2,070 bar 이내에서, poly(propyl acrylate)-에틸렌계는 1,400 bar 이하에서, poly(propyl acrylate)-프로판계는 1,880 bar 이하에서, poly(propyl acrylate)-프로필렌계는 450 bar 이하에서, poly(propyl acrylate)-부탄계는 2,200 bar이하에서, poly(propyl acrylate)-1-부텐계는 250 bar 이하에서, poly(propyl acrylate)-디메틸에테르계는 150 bar 이하에서 각각 용해되었으며, 이때 온도범위는 $23-175^{\circ}C$이였다. poly(propyl methacrylate)-$CO_2$ 혼합물은 2,900 bar 및 온도 $240^{\circ}C$에서도 용해되지 않았다. poly(propyl methacrylate)-프로판계는 약 2,390 bar이하에서, poly(propyl methacrylate)-부탄계에 대해서는 2,100 bar이하에서, poly(propyl methacrylate)-프로필렌계에 대해서는 570 bar 이하에서 poly(propyl methacrylate)-1-부텐계는 310 bar 이하에서, poly(propyl methacrylate)-$CHClF_2$계에 대해서는 300 bar 이하에서, 그리고 poly(propyl methacrylate)-디메틸에테르계에 대해서는 170 bar 이하에서 각각 용해되었으며, 이때 온도범위는 $40-186^{\circ}C$ 사이였다. 또한 이성분 poly(propyl acrylate)-$CO_2$와 poly(propyl acrylate)-디메틸에테르계의 상거동 사이에 디메틸에테르를 공용매로 사용하여 5, 15 및 50 wt% 첨가하여 구름점의 거동을 상임계용액온도 영역에서 하임계용액온도 영역까지 나타내었다.

• Structural Engineering and Mechanics
• /
• 제49권6호
• /
• pp.775-792
• /
• 2014

Static loading tests were carried out in this study to investigate the effect of bar cutoff on the resistance of RC beam-column sub-assemblages under column loss. Two specimens were designed with continuous main reinforcement. Four others were designed with different types of bar cutoff in the mid-span and/or the beam-end regions. Compressive arch and tensile catenary responses of the specimens under gravitational loading were compared. Test results indicated that those specimens with approximately equal moment strength at the beam ends had similar peak loading resistance in the compressive arch phase but varied resistance degradation in the transition phase because of bar cutoff. The compressive bars terminated at one-third span could help to mitigate the degradation although they had minor contribution to the catenary action. Among those cutoff patterns, the K-type cutoff presented the best strength enhancement. It revealed that it is better to extend the steel bars beyond the mid-span before cutoff for the two-span beams bridging over a column vulnerable to sudden failure. For general cutoff patterns dominated by gravitational and seismic designs, they may be appropriately modified to minimize the influence of bar cutoff on the progressive collapse resistance.

• 한국운동역학회지
• /
• 제14권3호
• /
• pp.119-134
• /
• 2004

The purpose of this study was to analyze the angular momentum characteristics of the Fosbury Flop high jump and the role of the body segments for the production of 3 angular momentum components. The subjects were three male jumpers who were former Korean national team players. Their jumping motions were analyzed using the DLT method of three-dimensional cinematography. The conclusions were as follows. 1. All the forward angular momentum needed to clear the bar was created in the take-off phase. Take-off leg was the great contributor of the forward angular momentum. On the other hand, free leg produced large opposite angular momentum. 2. All subject had some lateral angular momentum before the take-off phase. Head and free leg had major contribution to the lateral angular momentum production. Take-off leg produced opposite angular momentum. 3. All subject had some twisting angular momentum, which make the back of the athlete him to the bar, before the take-off phase. Free leg was the major contributor of the twisting angular momentum. Head and trunk was the second contributor of the twisting angular momentum. 4. Total angular momentum needed to clear the bar had no significant correlation to the jumping height. 5. Subject who made excessive angular momentum showed different pattern of angular momentum production and had a poor record compared to other subject.

• 응용통계연구
• /
• 제22권2호
• /
• pp.387-402
• /
• 2009

In this paper we have considered the problem of estimating the population mean $\bar{Y}$ of the study variable y using auxiliary information in presence of non-response. Classes of estimators for $\bar{Y}$ in the presence of non-response on the study variable y only and complete response on the auxiliary variable x is available, have been proposed in different situations viz., (i) population mean $\bar{X}$ is known, (ii) when population mean $\bar{X}$ and variance $S^2_x$ are known; (iii) when population mean $\bar{X}$ is not known: and (iv) when both population mean $\bar{X}$ and variance $S^2_x$ are not known: single and two-phase (or double) sampling. It has been shown that various estimators including usual unbiased estimator and the estimators reported by Rao (1986), Khare and Srivastava (1993, 1995) and Tabasum and Khan (2006) are members of the proposed classes of estimators. The optimum values of the first phase sample size n', second phase sample size n and the sub sampling fraction 1/k have been obtained for the fixed cost and the fixed precision. To illustrate foregoing, we have carried out an empirical investigation to reflect the relative performance of all the potentially competing estimators including the one due to Hansen and Hurwitz (1946) estimator, Rao (1986) estimator, Khare and Srivastava (1993, 1995) and Tabasum and Khan (2006) estimator.

• Journal of the Korean Data and Information Science Society
• /
• 제27권6호
• /
• pp.1487-1498
• /
• 2016

관리도를 사용하여 공정을 관리할 때, 일반적으로 공정 모수의 정확한 값은 알 수 없기 때문에 제1국면의 표본을 통하여 이를 추정해서 사용하고 있다. 또한 추정된 공정 모수를 이용하여 관리도를 설계하는 경우 관리한계는 관리상태에서의 런길이의 평균인 ARL (average run length)이 미리 지정한 값을 만족하도록 설정하고 있다. 그러나 런길이의 분포는 일반적으로 치우쳐져 있기 때문에, 런길이의 평균 대신 중위수를 사용하는 것이 바람직할 수 있다. 이 논문에서는 제1국면에서 추정한 모수를 사용하는 경우 부그룹의 크기에 따른 $\bar{X}$ 관리도의 성능에 대해 연구하였고, 이때 공정 평균에 대한 추정량은 전체 표본평균을 사용하고 공정 표준편차에 대해서는 5가지 추정량을 사용하여 이에 대한 영향을 살펴보았다. 기존 연구와 다른 점은 여러 가지의 부그룹 크기에 대해 모수 추정의 영향을 ARL 대신 런길이의 중위수인 MRL (median run length)에 기초하여 살펴보았으며, 두 가지 방법에 대해 그 결과를 비교하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권8호
• /
• pp.370-376
• /
• 2005

The single-phase induction motor is simple and durable, but the efficiency is low. Therefore, electric motors like HLDC and LSPM(line-start permanent magnet motor) that use the permanent magnet have been studied. The most advantages of single-phase LSPM is having the same stator as the stator of the single-phase induction motor and permanent magnets are just inserted in the squirrel cage rotor of the single-phase induction motor. But the characteristics of single-phase LSPM synchronous motor has very complex characteristics until the synchronization and if the design is not suitable, the single-phase LSPM synchronous motor cannot be synchronized. We designed a single-phase LSPM using the same stator and winding as the conventional single-phase induction motor, but newly designed the permanent magnets considering air gap magnetic flux density. The transient characteristics of the single-phase LSPM is not good because of a magnetic breaking torque, however, it can be improved by redesigning the rotor bars. We are proposed the design method of rotor bar for the single-phase LSPM to start softly and to make synchronization easily.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.631-632
• /
• 2006

This paper is written by research for the transient characteristics of the Single-phase Line-start permanent Magnet. The Single-phase Line-start permanent Magnet is most likely to substitute for Single-phase Induction Motor which is used about many appliance currently, because that has good points. For example, It has a Line-start of ability and a High-efficiency. And it need not power convergence device. The rotor of The Single-phase Line-start permanent Magnet has cage-bar with permanent magnet. This motor is started by cage-bar. When it entered synchronous condition, the rotor is rotated by the permanent magnet. But the design of the permanent magnet is very important, because the breaking torque of the permanent magnet interrupt to start a rotor. Finally, if Flux Barrier is not concerned, we do not get result of our object. Therefore this thesis is concerned about Flux Barrier.

• 열처리공학회지
• /
• 제5권1호
• /
• pp.13-22
• /
• 1992

The thermal stability of duplex high Mn-steel structure have been investigated using 15%Mn~1.0~2.4%C steels which are composed of ${\gamma}$-and ${\theta}$-phases in the range of temperature from 900 to $1100^{\circ}C$, and time from 50 to 300h. The results are as follows ; 1) The grain growth in single-phase region proceeds by grain boundary migration and the relation between mean radius $\bar{r}$ and annealing time t is described as follows ; $\bar{r}^2-{\bar{r}_0}^2=k_0{\cdot}t$ 2) The grain growth of duplex, (${\gamma}+{\theta}$), strucrure is slower than that single phase because the chemical composition of ${\gamma}$-and ${\theta}$-phases differs esch others. 3) The grain of (${\gamma}+{\theta}$) duplex structure grow slowly in a mode of Ostwald ripening. Because grain boundaries of ${\gamma}$-phase migrate under a restriction of pinning by ${\theta}$-phases. 4) In the duplex structures. the dispersed structures change to the dual-structures, as the volume fraction of the dispersed second-phase increase. Consequently, the growth-law, which is controlled by boundary-diffusion change to that of the volume diffusion-mechanism.

• 로봇학회논문지
• /
• 제14권4호
• /
• pp.245-250
• /
• 2019

Milli-scale crawling robots have been widely studied due to their maneuverability in confined spaces. For successful crawling, the crawling robots basically required to fulfill alternating gait with elliptical foot trajectory. The alternating gait with elliptical foot trajectory normally generates both forward and upward motion. The upward motion makes the aerial phase and during the aerial phase, the forward motion enables the crawling robots to proceed. This simultaneous forward and upward motion finally results in fast crawling speed. In this paper, we propose a novel alternating mechanism to make a crab-inspired eight-legged crawling robot. The key design strategy is an alternating mechanism based on double four-bar linkages. Crab-like robots normally employs gear-chain drive to make the opposite phase between neighboring legs. To use the gear-chain drive to this milli-scale robot system, however, is not easy because of heavy weight and mechanism complexity. To solve the issue, the double-four bar linkages has been invented to generate the oaring motion for transmitting the equal motion in the opposite phase. Thanks to the proposed mechanism, the robot crawls just like the real crab with the crawling speed of 0.57 m/s.

• 대한의생명과학회지
• /
• 제23권4호
• /
• pp.327-332
• /
• 2017

A2B adenosine receptor (A2BAR) is known to be a regulator of bone homeostasis, but the regulatory mechanism of A2BAR on the osteoclast proliferation are poorly explored. Recently, we have shown that stimulation with BAY 60-6583, a specific agonist of A2BAR, significantly reduced macrophage-colony stimulating factor (M-CSF)-induced osteoclast proliferation by inducing cell cycle arrest at G1 phase and increasing the apoptosis of osteoclasts. The objective of this study was to investigate the regulatory mechanisms of cell cycle and apoptosis by A2BAR stimulation. The expression of A2BAR and M-CSF receptor, c-Fms, was not changed by A2BAR stimulation whereas M-CSF effectively induced c-Fms expression during osteoclast proliferation. Interestingly, A2BAR stimulation remarkably increased the expression of $p27^{Kip-1}$, a cell cycle inhibitor, but the expression of Cyclin D1 and cdk4 was not affected. In addition, while BAY 60-6583 treatment reduced the expression of Bcl2, an anti-apoptotic oncogene, it failed to regulate the expression of Bax, a pro-apoptotic marker. Taken together, these results imply that the increase of $p27^{Kip-1}$ inducing cell cycle arrest at G1 phase and the decrease of Bcl2 inducing anti-apoptotic response by A2BAR stimulation contribute to the down-regulation of osteoclast proliferation.