• 한국군사과학기술학회지
• /
• 제25권5호
• /
• pp.487-500
• /
• 2022

Supercavitation is a phenomenon in which the cavity covers the entire underwater vehicle. The purpose of this paper is to compare and analyze the thermal effect on the cavity characteristics by changing the ventilated gas temperature through computational analysis. For this study, a homogeneous mixture model based on the 3D Navier-Stokes equation was used. As a phase change model, it is its own code considering both pressure change and temperature change. A dimensionless number T_m was presented to analyze the numerical results, and as the T_m increased, the cavity length increased by about 3.6 times and the cavity width by about 3.3 times at 393.15 K compared to room temperature. Analyzing these thermal effects, it was confirmed that rapid heat exchange and heat transfer between the gas phase and the liquid phase occurred at the location where the ventilated gas was sprayed, affecting the cavity characteristics. In addition, it can be confirmed that the initial cavity surface becomes unstable as the ventilated gas temperature increases, and it can be confirmed based on the numerical analysis results that the critical temperature at which the cavity surface becomes unstable is 373.15 K.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2007년도 춘계학술대회
• /
• pp.221-225
• /
• 2007

We have prepared $\delta$-phase SbTe alloy with various Sb contents of 64, 72, and 76 at. % and investigated the phase change temperature, the crystal structures of $\delta$-phase SbTe alloy, and determined the ovonic threshold switching voltages with edge contact type phase transition dimensions. As a result, the crystallization temperature is slightly reduced from 126 to $122^{\circ}C$, whereas the melting temperature is not changed. The ovonic threshold switching voltage is reduced from 1.6 to 0.9 V as increasing the Sb content from 64 to 76 at. %. It is found that the reductions of crystallization temperature and the ovonic threshold switching voltage are closely related with the interplanar spacing between adjacent atomic layers and the stacking number of atomic layers in a unit cell.

• 한국세라믹학회지
• /
• 제51권1호
• /
• pp.25-31
• /
• 2014

New green phosphor is synthesized by reducing $LiAlO_2:xEu^{3+}$ phosphors in a low pressure $H_2$ atmosphere. The $LiAlO_2:xEu^{3+}$ prepared by a solid state reaction method is reported as red phosphor. The effect of the reduction treatment on the $LiAlO_2:xEu^{3+}$ on the crystalline phase change and photoluminescence (PL) property are characterized. The reduced phosphor had a broad green light spectrum centered at 524 nm. The PL intensity of the reduced phosphor increased to a maximum at the reduction temperature of $1100^{\circ}C$. The PL intensity decreased with a further increase in the reduction temperature. The crystalline phase constituting the reduced phosphor varied with the temperature. A new crystalline phase $Li_2Al_4O_7$ was observed at $1100^{\circ}C$. The origin of the green-light emission is discussed in relation to the crystalline phase change.

• Korean Chemical Engineering Research
• /
• 제50권2호
• /
• pp.300-303
• /
• 2012

침전탄산칼슘 결정화계에서 첨가제인 ethylenediaminetetraacetic acid(EDTA), diethylene triaminepentaacetic acid(DTPA), citric acid(CIT), pyromellitic amid(PMA) 첨가에 의한 탄산칼슘 결정의 형상 변화를 연구하였다. 첨가제를 넣지 않았을 때 낮은 온도 $20^{\circ}C$에서는 calcite 결정이 생성되었고, 높은 온도 $80^{\circ}C$에서는 aragonite 결정이 생성되었으며 EDTA와 DTPA 첨가에 의한 40, $60^{\circ}C$ 중간온도에서는 aragonite 결정이 생성됨을 알 수 있었다. CIT와 PMA 첨가에 의해 aragonite의 성장이 지연되었으며 calcite 단일상이 나타났다. 첨가제가 단일상의 탄산칼슘을 만드는데 중요한 요소임이 발견되었다.

• 한국전기전자재료학회논문지
• /
• 제32권6호
• /
• pp.448-453
• /
• 2019

This work reports the electrical characteristics of and temperature distribution in chalcogenide phase change memory (PCM) devices that have a self-aligned structure. GST (Ge-Sb-Te) chalcogenide alloy films were formed in a self-aligned manner by interdiffusion between sputter-deposited Ge and $Sb_2Te_3$ films during thermal annealing. A transmission electron microscopy-energy dispersive X-ray spectroscopy (TEM-EDS) analysis demonstrated that the local composition of the GST alloy differed significantly and that a $Ge_2Sb_2Te_5$ intermediate layer was formed near the $Ge/Sb_2Te_3$ interface. The programming current and threshold switching voltage of the PCM device were much smaller than those of a control device; this implies that a phase transition occurred only in the $Ge_2Sb_2Te_5$ intermediate layer and not in the entire thickness of the GST alloy. It was confirmed by computer simulation, that the localized phase transition and heat loss suppression of the GST alloy promoted a temperature rise in the PCM device.

• 한국세라믹학회지
• /
• 제31권10호
• /
• pp.1176-1180
• /
• 1994

The sliding wear behavior of the plasma-sprayed zirconia containing 3 mol% yttria was investigated after the annealing at room temperature to 80$0^{\circ}C$ in various concentrations of humid atmosphere as laboratory, humid, dry argon atmosphere. Both of the friction coefficient and the wear loss increased with increasing temperature up to 80$0^{\circ}C$. Surface morphology of the worn samples changed with annealing temperature. The change of monoclinic/tetragonal (m/t) x-ray peak intensity ratio effected the wear behavior. The m/t ratio had maximum value at 20$0^{\circ}C$ and decreased with increased temperature in laboratory and humid atmosphere. In argon atmosphere the m/t ratio had no maximum value and decreased with increasing temperature. At all the annealing temperature humid atmosphere had more the m/t ratio value than any other atmosphere. The change of toughness was showed the inversed result of m/t ratio change. The results indicated that the resudial stress which was induced by the different amount of phase transformation takes a detrimental role in wear behavior.

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권1호
• /
• pp.13-16
• /
• 2005

High temperature superconductor, $\YBa_2Cu_3O_{7-x}$ (YBCO) and ferroelectric, $\Ba_{0.1}Sr_{0.9}TiO_{3}$ (BST) multilayer thin films were deposited using on MgO(100) substrates pulsed laser deposition. The thin films exhibited only (001) peaks of YBCO and 1357 The HTS thin films demonstrated excellent zero resistance temperature of 92.5 K. We designed and fabricated HTS ferroelectric phase shifter using high frequency system simulator and standard photolithography method, respectively The HTS phase shifter shows a low insertion loss (2.97 dB) and large phase change ($\162^{circ}$) with 40 V do bias at 10 GHz. The HTS phase shifter shows 54 of figure of merit. These results can be applicable to phased anay antenna system for satellite communication services.

• Structural Engineering and Mechanics
• /
• 제76권5호
• /
• pp.579-590
• /
• 2020

This paper's objective is to investigate the effect of gravity on a micropolar thermoelastic medium with voids. The problem is assessed according to the three-phase-lag model. An analysis of the resulting non-dimensional displacement, temperature variation, and internal stress of the study material is carried out and presented graphically. The non-dimensional displacement, temperature, micro-rotation, the change in the volume fraction field and stress of the material are obtained and illustrated graphically. Comparisons are made with the results predicted by different theories for different values of gravity, the phase-lag of the heat flux and the phase-lag of the temperature gradient. The numerical results reveal that gravity and relaxation times have a significant influence on the distribution of the field quantities. Some notable insights of interest are deduced from the investigation.

• 한국광학회지
• /
• 제13권3호
• /
• pp.240-244
• /
• 2002

광 위상지연기에서 두 편광축 사이의 위상차가 온도의 함수라는 현상을 이용하여 새로운 온도측정기를 제안하였다. 특정한 파장의 입력광이 일정한 길이의 광 위상지연기를 통과하면 온도에 따라 그 편광상태가 바뀌게 된다. 이때의 편광성분을 진행방향에 수직한 두 축 성분으로 분리하여 그 출력을 비교하면 광 위상지연기의 온도를 결정할 수 있다. 본 연구에서는 광 위상지연기로 길이 100mm의 편광유지 광섬유를 이용하여 온도측정기를 구현하였다. 온도에 대한 위상차 변화율은 0.236$^{\circ}C$$_{-1}$이었고, -2.6$^{\circ}C$~3.4$^{\circ}C$에서 $\pm$0.038$^{\circ}C$의 측정오차를 보였다.

• 열처리공학회지
• /
• 제23권5호
• /
• pp.263-268
• /
• 2010

This investigation was focused on the low temperature tensile properties, phase change, changes in nitrogen content and corrosion resistance in the 22Cr-5Ni-3Mo duplex stainless steel after high temperature gas nitriding and solution annealing (HTGN-SA). From the HTGN-SA treatment, the duplex (ferrite + austenite) phase changed into austenite single phase. The nitrogen content of austenite single-phase steel showed a value of ~0.54%. For the HTGN-SA treated austenitic steel, tensile strength increased with lowering test temperature, on the other hand elongation showed the maximum value of 28.2% at $-100^{\circ}C$. The strain-induced martensitic transformation gave rise to lead the maximum elongation. After HTGN-SA treatment, corrosion resistance of the austenite single-phase steel increased remarkably compared with HTGN- treated steel.