• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.247-247
• /
• 2000

A new bioelectric impedance measurement method is proposed for the precise measurement of the bioelectric impedance. To obtain the impedance from the known applied a.c. current and the measured voltage signals, a frequency conversion circuit, like the mixer in heterodyne receivers, is introduced to reduce the frequency of the original current. It can be observed from several lines of derivation that the impedance is independent on the amplitude and phase of the mixing signals. This makes it possible to use low-speed analog-to-digital converters and thus utilize cheaper electronic parts in the implementation. The possibility of the method is shown by simulations, and a generic structure applicable to bioelectric impedance measurement devices is also proposed.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권4호
• /
• pp.177-182
• /
• 2003

We have proposed the dimming controller using the AC chopper technique. The AC chopper changes the amplitude of the input source voltage with the same frequency. The conventional dimming controller is operated by controlling voltage phase with the triac. It has bad characteristics of the input current THD and the input power factor But the dimming controller using the ac chopper technique has a low current THD and a good power factor. The developed dimming controller is consist of the IGBT and the low pass filter. The system is operated by the variation circuit of the input source voltage and the microprocessor.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권4호
• /
• pp.177-177
• /
• 2003

We have proposed the dimming controller using the AC chopper technique. The AC chopper changes the amplitude of the input source voltage with the same frequency. The conventional dimming controller is operated by controlling voltage phase with the triac. It has bad characteristics of the input current THD and the input power factor But the dimming controller using the ac chopper technique has a low current THD and a good power factor. The developed dimming controller is consist of the IGBT and the low pass filter. The system is operated by the variation circuit of the input source voltage and the microprocessor.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권6호
• /
• pp.2893-2907
• /
• 2019

Wireless mobile communication systems in subway tunnels have been widely researched these years, due to increased demand for the communication applications. As a result, an accurate model is essential to effectively evaluate the communication system performance. Thus, a neoteric three-dimensional (3D) geometry-based stochastic model (GBSM) is proposed for the massive multiple-input multiple-output (MIMO) fading channels in tunnel environment. Furthermore, the statistical properties of the channel such as space-time correlation, amplitude and phase probability density are analyzed and compared with those of the traditional two-dimensional (2D) model by numerical simulations. Finally, the ergodic capacity is investigated based on the proposed model. Numerical results show that the proposed model can describe the channel in tunnels more practically.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1989년도 봄 학술발표회 논문집
• /
• pp.5-10
• /
• 1989

In this study, the basic concept of design response spectrum is briefly revi-ewed. To generate the artificial earthquake acceleration, the method of superpo-sition of cosine waves is used. Theoretical developments using F.F.T. and spect-ral density function are compared. The amplitude was derived by use of the peak factor and the phase angle is d-erived by use of Monte Carlo simulation. To smoothen the match, the calculated pseudo velocity respon-se spectrum is compared with input pseudo velocity response spectrum at a set of control frequencies. With the modified spectral density function, a new acceleration and pseudo velocity response spectrum are generat-ed.

• 한국산업융합학회 논문집
• /
• 제25권4_1호
• /
• pp.505-511
• /
• 2022

The objective of this article is finding optimized locations of active mounts applied to 6-DOF beam structure with two active paths. When sinusoidal excitation forces are applied to the beam structure, secondary forces from two active mounts which can minimize (ideally becoming zero) transmitted forces are calculated mathematically and the vibration attenuation performance is validated through computer simulations. When the force applied to two active mounts are relatively low, those specific locations are considered as optimized location of active mounting system. As the location of mount changes, amplitude and phase of secondary forces in each path are analyzed with 3D plots. Based on the simulation results, a criterion for selecting mounting location is suggested and it would be very useful for selecting actuators for active mounts appropriately.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.556-560
• /
• 2004

Three-phase Matrix Converter has become an effective substitution for the conventional converter module due to generation of the feasible variety of frequency and amplitude output voltage without energy storage elements besides the advantage of unity input power factor at the power supply and the regeneration capability. This paper introduces two kinds of current controllers for the matrix converter fed induction motor. Some simulated results are carried out to verify the effectiveness of the two-proposed methods as compared with the classical method using voltage source inverter.

• 전력전자학회논문지
• /
• 제6권2호
• /
• pp.125-131
• /
• 2001

본 논문은 백터제어기법을 적용한 철도차량용 1.2MVA전동차 구동시스템의 개발에 관한 것이다. 벡터제어를 위해서는 출력 전압의 크기와 위상을 순시적으로 제어해야한다. 전동차 구동시스템에서는 DC링크 단의 전압 이용률을 최대로 하기 위해 고속 운전 영역에서는 1펄스 모드를 사용한다. 따라서 고속 운전 영역에서는 토크성분 전류와 지송성분 전류를 독립적으로 술시 에어해야 하는 백터제어기법을 정용할 수 없다. 이에, 본 연구에서는 저속이 운전영역에서는 순시 토크 제어가 가능한 벡터제어를 적용하고, 고속 운전 영역에서는 슬립 주파수제어를 적용하는, 백터 제어와 스칼라 제어의 병용제어 기법을 제안하였다. 또한 운전영역에 따라 이들 두 제어방법이 부드럽게 전환되도록 하는 제어기법이 제시되었다. 제안되 제어기법을 4대의 210kW 유도전동기를 구동하는 1.2MVA 전동차 견인 구동시스템에 적용하여 그 효용성을 알아보았다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.13-13
• /
• 2002

A Spatial light modulator (SLM) is a real-time programmable device having the modulation function of the amplitude, phase or polarization of an optical wavefront as a function of position via electrical or optical control signals. Various types of reusable SLMs with two-dimensional pixel arrays are centrally important devices in volumetric recording, data processing, pattern recognition, optical computer and other optical system. (omitted)

• 한국전자파학회논문지
• /
• 제17권7호
• /
• pp.694-705
• /
• 2006

본 논문은 Ku 위성 방송 대역에서 동작하는 선형 능동 위상 배열 안테나 시스템의 설계 및 실험에 관한 것으로, 안테나 시스템은 16개의 방사 능동 채널 및 16 채널 입력의 윌킨슨 전력 결합기 그리고 안정화 직류 전원 및 위상 제어 보드로 구성된다. 각 능동 채널 내에는 3-비트 디지털 위상 천이기가 존재하여 제어부로부터 위상을 제어 받아 전자적인 안테나 빔을 형성할 수 있다. 측정된 각 능동 채널간의 진폭 및 위상 편차는 각각 ${\pm}0.8dB$ 이하 및 ${\pm}15^{\circ}$ 이하였으며, 각 능동 채널의 잡음 지수는 동작 대역 내에서 1.2 dB 이하의 성능을 갖는다. 전체 안테나 시스템의 측정 성능은 동작 대역 내에서 23.07 dBi 이상의 안테나 이득과 - 11.17 dBc 이하의 사이드로브 레벨 그리고 정방향에서 -12.75 dBc 이하의 교차 편파 레벨을 보여 주었다. 또한, 능동 채널내 위상 제어를 통해 $10^{\circ},\;20^{\circ},\;30^{\circ}$의 빔 스캔 방사 패턴이 측정되었으며, 이때, 각각 1.1 dB, 2.5 dB, 3.6 dB의 빔 스캔 손실 성능을 보여 주었다.