• Journal of Power Electronics
• /
• 제11권5호
• /
• pp.655-661
• /
• 2011

This paper presents two topologies for single-stage single-phase double-buck type PFC converters, designed to operate at high power factor, near sinusoidal input currents and adjustable output voltage. Unlike the known buck type PFC topologies, in which the output voltage is always lower than the maximum input voltage, the proposed converters can operate at output voltages higher than the ac input peak voltage. A reduced number of switches on the main path of the current are another characteristic of the two proposed topologies. To shape the input line currents, a fast and robust controller based on a sliding mode approach is proposed. This active non-linear control strategy, applied to these converters allows high quality input currents. A Proportional Integral (PI) controller is adopted to regulate the output voltage of the converters. This external voltage controller modulates the amplitude of the sinusoidal input current references. The performances of the presented rectifiers are verified with experimental results.

• 대한약리학회지
• /
• 제20권2호
• /
• pp.23-34
• /
• 1984

실험적으로 명암주기 또는 암주기에 적응시킨 백서의 간뇌 homogenate에서 opiate receptor의 일중변동 유무를 검토하고, circadian rhythm에 영향을 미치는 것으로 알려진 수종 중추작용약물의 영향을 보고 저 7 group에서 4시간 간격으로 1일 6회 maximum $^3H-morphine$ binding을 측정하여 다음과 같은 성적을 얻었다. 1) L : D, 12 : 12에 적응시킨 대조군에서 maximum $^3H-morphine$ binding은 22시에 최고에 달하는 매우 유의한 일중변동을 보였고, 24시간 평균 $^3H-morphine$ binding치는 $0.45{\pm}0.03\;pmole/mg Protein이었다. 2) 지속적인 암적응을 시킨 D : D, 12 :12군에서 $^3H-morphine$ binding의 일중변동은 14시에 최하, 그리고 2시에 최고의 binding치를 보이는 만상성의 일주변동은 보였으며 대조군의 곡선과는 그 shape, Phase, 진폭, 최고 또는 최하 binding시기 및 24시간평균 opiate수용체의 수에 현저한 차이가 있었다. 3) 지속적인 암적응, reserpine, pargyline, imipramine, amphetamine 또는 chlorpromazine 처리는 opiate receptor의 일중변동을 변화시켰다. 4) 그러나 전 실험군에서 Kd치는 변동되지 않았다. 이상 실험성적으로 백서뇌내 opiate수용체의 일중변동은 수용체의 질적변동이 아닌 수적인변동에 의하고, 지속적인 암적응이나 circadian rhythm을 변동시키는 중추성 약물들이 opiate receptor의 일중변동을 변화시킬 수 있으며, 또한 동통을 포함하여 제종 진통제의 효과가 일중변동을 일으키는 것은 opiate receptor의 일중변동과 일정한 관계가 있을 것으로 추측하였다.

• 한국전자파학회논문지
• /
• 제21권6호
• /
• pp.617-626
• /
• 2010

본 논문에서는 광혼합 방식으로 서브 밀리미터 및 테라헤츠 대역 연속파 신호를 발생시키는 기법 중 가장 널리 사용되는 광반송파가 억제된 양측 대역 발생 방식(Double Sideband-Suppressed Carrier: DSB-SC)을 이용하여 발생된 연속파(Continuous Wave: CW) 신호의 위상 잡음 개선을 위하여 광신호의 편광과 위상 제어 기법을 제안하고 실험적으로 증명하였다. 광신호의 편광 및 위상 제어 기법은 일반적인 DSB-SC 신호와 DSB-SC 신호에 포함된 광반송파와 동일한 파장과 위상차를 가지며, 광반송파의 편광 성분 중 하나의 편광 성분만을 갖도록 편광제어된 광신호를 결합하여 광혼합하는 방법이다. 실험 및 측정 결과, 서브 밀리미터파 대역 CW 신호의 크기는 1.5 dB 증가하였으며, 위상 잡음 특성은 약 3 dB@10 kHz offset frequency 개선됨을 확인하였다. 따라서 본 논문의 결과는 광신호의 위상 및 편광 성분 제어만으로 광반송파를 효과적으로 억제하여 서브 밀리미터 및 테라헤르츠 대역 CW 신호의 특성을 개선함으로써 광혼합 방법을 이용한 밀리미터파 및 테라헤르츠파 대역 CW 신호 발생기의 저가화를 위한 기본적인 데이터로서 활용 가치가 높다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.479-482
• /
• 2001

This paper proposes a modified $\alpha$ conduction mode for controlling the output voltage magnitude of three-phase square-wave VSIs with an R-L load. From the viewpoint of both power capacity and switching losses, three-phase square-wave inverters are now used in most high power systems. When the square-wave VSI is driven with $\alpha$ conduction mode to control the magnitude of output voltages, interval over than half period is operated with $180^{\circ}$ conduction mode and the other interval with $120^{\circ}$ conduction mode. In $120^{\circ}$ conduction mode operation, two output terminals are connected to DC supply and the third one remains open. The potential of this open terminal will depend on the load characteristics and is unpredictable except the case of pure resistive loads. To cope this problem, we propose the modified α conduction mode.

• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1851-1860
• /
• 2016

The traction motors in electric multiple unit (EMU) trains are powered by AC-DC-AC converters, and the DC link voltage is generated by single phase PWM converters, with a fluctuation component under twice the frequency of the input catenary AC grid, which causes fluctuations in the motor torque and current. Traditionally, heavy and low-efficiency hardware LC resonant filters parallel in the DC side are adopted to reduce the ripple effect. In this paper, an analytical model of the ripple phenomenon is derived and analyzed in the frequency domain, and a ripple control scheme compensating the slip frequency of rotor vector control systems without a hardware filter is applied to reduce the torque and current ripple amplitude. Then a relatively simple discretization method is chosen to discretize the algorithm with a high discrete accuracy. Simulation and experimental results validate the proposed ripple control strategy.

• 전자공학회논문지B
• /
• 제32B권12호
• /
• pp.1644-1651
• /
• 1995

A data and clock recovery integrated circuit for MAC (Multiplexed Analog Component) TV standard is described. The chip performs the recovery of a system clock from a digitally encoded voice signal, clamping of a video signal for DC-level restoration, and precise gain control of a video signal in the presence of a large amplitude variation. A PLL (Phase Locked Loop) is used for timing recovery and a new gain control circuit is proposed which enhances its accuracy and dynamic range by employing two identical four-quadrant analog multipliers. The chip is designed in full custom with 1.5um BiCMOS technology, and layout verification is completed by post-simulation with the extracted circuit.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.455-455
• /
• 2000

A novel pulse-width-modulated (PWM) function is introduced for precise position measurement in an enclosed signal field. An amplitude modulation was used to light the LEDs for the conventional study. However, the transform properties from the driving signal to the lighting intensities of the LEDs are non-linear, and accurate control of the lighting power was necessary. Therefore, a lighting function independent of these properties is desired. Well-known PWM functions are used to construct the enclosed signal field by simulation, and the precision of the phase detecting system is analyzed. A novel "axial symmetry PWM" function is found to be effective for orthogonal pahse detection.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제12권3호
• /
• pp.131-140
• /
• 2004

The purpose of this research is to derive the principal design parameters governing the dynamic characteristics of the high response flow control servo valve. For this purpose, a numerical modeling of the servo valve system and a parameter sensitivity analysis to a frequency response characteristics were performed. As a result of these analysis, a basis for improvement of a dynamic characteristics of servo valve was arranged.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.787-790
• /
• 2004

In this paper, a novel control scheme compensating for source voltage unbalance and current harmonics and power factor correction in unified active power filter systems combined with shunt passive filters is proposed, where no low/high-pass filter are used in deriving the reference voltage for compensation. Using digital all-pass filters, the phase angle and the reference voltages compensating for harmonic current and unbalanced voltage are derived from the positive sequence component of the unbalanced voltage. The amplitude of d-axis current in a series filter is controlled as zero for power factor correction. The validity of the proposed control scheme has been verified by experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.103-105
• /
• 2004

In this paper, a novel control scheme compensating for source voltage unbalance and current harmonics and power factor simultaneously in unified active power filter systems combined with shunt passive filters is proposed, where no low/high-pass filter are used in deriving the reference voltage for compensation. Using digital all-pass filters, the phase angle and the reference voltages compensating for harmonic current and unbalanced voltage are derived from the positive sequence component of the unbalanced voltage. The amplitude of d-axis current in a series filter is controlled as zero for power factor correction. The validity of the proposed control scheme has been verified by experimental results.