• 전기학회논문지P
• /
• 제59권3호
• /
• pp.325-329
• /
• 2010

Capacitor has been used principally for the power factor compensation long ago. However now it does as passive filter to reduce harmonics of nonlinear load with reactor. Most of the customer's low-voltage feeder has been designed with approximately balanced and connected at the 3 phase four wire system. But voltage and current unbalance is appeared by the mixing operation of single or three phase load etc. The addition of reactor at the condenser may rise its terminal voltage. Voltage and current values above rating can act on electrical stress on the condenser. In this paper, we calculated and measured that voltage, current and capacity of condenser are changed under the voltage balance. We conclude that magnitude and deviation of phase voltage act on major point of electrical stress.

• Journal of information and communication convergence engineering
• /
• 제19권4호
• /
• pp.199-204
• /
• 2021

We propose a dispersion-managed link with a non-midway optical phase conjugator (OPC), in which the residual dispersion per span (RDPS) of each fiber span is different for each transmission section before and after OPC. We numerically demonstrate the compensation for 960-Gb/s wavelength-division multiplexed (WDM) signals distorted by chromatic dispersion and Kerr nonlinearity of the fiber. We consider different cases for non-midway OPC, including six fiber spans - OPC - 14 fiber spans and 14 fiber spans - OPC - 6 fiber spans. The numerical results show that the compensation of the distorted 960 Gb/s WDM is more efficient when the OPC is placed after 6-th fiber span as compared to after the 14-th fiber span. Our simulation results also indicate that the compensation effect increases when the difference in net residual dispersion between both transmission sections is not large, but they are not the same. Under this condition, the larger the magnitude of the RDPSs of each fiber span, the greater the compensation.

• Advances in nano research
• /
• 제16권2호
• /
• pp.141-154
• /
• 2024

This study aims to develop explicit models to investigate thermo-mechanical interactions in moving nanobeams. These models aim to capture the small-scale effects that arise in continuous mechanical systems. Assumptions are made based on the Euler-Bernoulli beam concept and the fractional Zener beam-matter model. The viscoelastic material law can be formulated using the fractional Caputo derivative. The non-local Eringen model and the two-phase delayed heat transfer theory are also taken into account. By comparing the numerical results to those obtained using conventional heat transfer models, it becomes evident that non-localization, fractional derivatives and dual-phase delays influence the magnitude of thermally induced physical fields. The results validate the significant role of the damping coefficient in the system's stability, which is further dependent on the values of relaxation stiffness and fractional order.

• 한국재료학회지
• /
• 제3권1호
• /
• pp.72-83
• /
• 1993

비페닐 티오에스터 계열 강유전성 액정물질에 대한 새로운 합성방법이 논의되었다. 합성된 많은 액정물질들은 강유전성 스메틱 C상 뿐만 아니라 키랄네마틱과 스메틱 A상을 나타내었으며, $10^{-8}$C/c$m^2$ 이상의 큰 자발분극을 나타내었다. 이 계열들로써 우리는 비대칭 탄소에 붙은 치환체의 크기와 분극도가 자발분극에 미치는 영향을 조사하였으며 치환체의 크기에 대한 Sc*상의 안정도를 결정할 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 제13회 신호처리 합동 학술대회 논문집
• /
• pp.389-392
• /
• 2000

In this paper, we propose a novel post processing method of deconvolution for SAR images based on phase extension inverse filtering, which improves spatial resolution as well as effectively eliminates sidelobes with low computational complexity. It extends the bandwidth only to control the magnitude of the processed SAR data without distortions of the phase in frequency domain unlike the other techniques such as spatially variant apodization (SVA), and other deconvolution techniques. We compare the image processed by the proposed method with images processed by uniform weighting function, Hamming weighting function whose coefficient is 0.75, and SVA.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.449-451
• /
• 2008

This paper studies the instability between homopolar generator and constant power load with negative impedance characteristics, provides the design method of homopolar generator system which overcomes the instability. In case of magnitude and phase of impedance of source and load mismatch, control instability of source can occur. For the safety of phase of load impedance, the gain of P, I controller with sufficient phase margin is applied through analysis on the simulation model of generator system, and the gain limit of load impedance is ensured by limitation of the gain margin of generator system. The stability of power system can be increased by considering and analyzing the impedance of source and load.

• 한국세라믹학회지
• /
• 제26권6호
• /
• pp.802-810
• /
• 1989

The temperature dependence of piezoelectric strain constant and the electric field induced strain are investigated as a function of PT in 0.5[xPT-(1-x)PZ]-0.5PNN ceramics. The piezoelectric strain constant d31 has the highest value(360$\times$10-12m/V) at PT=0.68. The temperature dependence of d31 is improved as Curie temperature of sample is increased, and the electric field dependence of induced strain is decreased with the coercive field increased. This ceramic system shows both piezoelectric effect and electrostrictive effect under the applied electric field. The piezoelectric of tetragonal phase is higher than that of rhombohedral phase, and the magnitude of electrostrictive constant is appeared in the order of morphotropic, rhombohedral and tetragonal phase. The piezoelectric strain constant with applied field must be considered theelectrostrictive effect due to 90$^{\circ}$domain wall displacements, and the displacement of bimorph type actuator agrees with the calulated value well.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권7호
• /
• pp.352-360
• /
• 2003

This paper deals with a simple method in order to analyze and compare the harmonic characteristics in the multi-level inverter. Generally, the magnitude of harmonic components becomes different according to the multi-carrier Pulse Width Modulation(PWM) techniques, the modulation index($M_i$) and the switching frequency The previous papers analyzed the harmonic characteristics from the viewpoint of the space voltage vector. Hence, the calculation of the harmonic vector becomes more difficult and complex in 4-level or over 5-level. However, the proposed method has reduced an amount of calculation and simplified the process of it, using the relationship between the reference voltage and the output phase voltage to the load neutral point. It is applied to the 5-level cascade inverter and the harmonic characteristics for each multi-carrier PWM technique are compared through the simulation.

• Journal of Magnetics
• /
• 제3권2호
• /
• pp.55-63
• /
• 1998

Magnetic and magnetostrictive properties of amorphous Sm-Fe and Sm-Fe-B thin films are systematically investigated over a wide composition range from 14.1 to 71.7 at.% Sm. The films were fabricated by rf magnetron sputtering using a composite target composed of an Fe (or Fe-B) plate and Sm chips. The amount of B added ranges from 0.3 to 0.8 at. %. The microstructure, examined by X-ray diffraction, mainly consists of an amorphous phase in the intermediate Sm content range from 20 to 45 at.%. Together with an amorphous phase, crystalline phases of Fe and Sm also exist at low and high ends of the Sm content, respectively. Well-developed in-plane anisotropy is formed over the whole compositionrange, except for the low Sm content below 15 at.% and the high Sm content above 55 at %. As the Sm content increases, the saturation magnetization decreases linearly and the coercive force tends to increase, with the exception of the low Sm content where very large magnitudes of the saturation magnetization and the coercive force are observed due to the existence of the crystalline $\alpha$-Fe phase. The coercive force is affected rather substantially by the B addition, resulting in lower values of the coercive force in the practically important Sm content range of 30 to 40 at.%. Good magnetic softness indicated by well-developed in-plane anisotropy, a square-shaped hysteresis loop and a low magnitude of the coercive force results in good magnetostrictive characteristics in both Sm-Fe-B thin films. The magnetostrictive characteristics, particularly at low magnetic fields, are further improved by the addition of B; for example, at a magnetic field of 100 Oe, the magnitude of magnetostriction is -350 ppm in a Sm-Fe thin film and it is -470 ppm in a B containing Sm-Fe thin film.

• Journal of Communications and Networks
• /
• 제2권1호
• /
• pp.69-75
• /
• 2000

A new frame synchronization confirmation technique using a pilot pattern of both uplink and downlink channels is proposed for W-CDMA (Wideband Code Division Multiple Access) system. It is shown that by using this technique, we can cancel the side lobe for autocorrelation functions of the frame synchronization words of pilot pattern have the maximum to-of-phase autocorrelation value "4" with two peak values equal in magnitude and opposite in polarity at zero and middle shifts. Due to this side lobe cancellation effect, therefore, the autocorrelation function of the frame synchronization words becomes ideal for the frame synchronization confirmation since double maximum correlation values equal in magnitude and opposite polarity at zero ad middle shifts can be achieved. This property can be used to double check frame synchronization timing and thus. improve the frame synchronization confirmation performance.