• Korean Chemical Engineering Research
• /
• 제52권3호
• /
• pp.307-313
• /
• 2014

본 연구에서는 Isobutyl Acetate와 Isobutyl Alcohol의 공비혼합물을 압력변환증류공정(PSD; Pressure Swing Distillation Process)을 이용하여 99.9 mol% 이상의 Isobutyl Acetate를 분리하는 공정모사를 수행하였다. 압력변환증류공정은 공비혼합물의 상대휘발도와 공비조성이 압력의 변화에 따라 차이가 나는 특성을 이용한 공정이다. 액상에서는 Non-Random Two Liquid (NRTL) model을 그리고 기상에서는 Peng-Robinson equation을 이용하였다. 최적화 방법으로 환류비와 주입단 위치를 변수로 두고 총 재비기 소요 열량을 최소화시키는 목적으로 최적화를 수행하였다. 압력변환 증류공정은 두 개의 증류탑을 필요로 함에 따라 고압 증류탑과 저압 증류탑의 배열에 따른 최적화 조건 또한 비교를 수행하였다.

• 한국전산유체공학회지
• /
• 제21권3호
• /
• pp.15-23
• /
• 2016

In the present study, two phase flows around a projectile vertically launched from an underwater platform have been numerically investigated by using a three dimensional multi-phase RANS flow solver based on pseudo-compressibility and a homogeneous mixture model on unstructured meshes. The relative motion between the platform and projectile was described by six degrees of freedom equations of motion with Euler angles and a chimera technique. The propulsive power of the projectile was modeled as the fluid force acting on the lower surface of the body by the compressed air emitted from the underwater platform. Various flow conditions were considered to analyze the fluid-dynamics motion parameters of the projectile. The water level of platform and the current speed around the projectile were the main parametric variables. The numerical calculations were conducted up to 0.75sec in physical time scale. The dynamics tendency of the projectile was almost identical with respect to the water level variation due to the constant buoyancy term. The moving speed of the projectile along the vertical axis inside the platform decreased when the current speed increased. This is because the inflow from outside of the platform impeded development of the compressed air emitted from the floor surface of the launch platform. As a result, the fluid force acting on the lower surface of the projectile decreased, and injection time of the projectile from the platform was delayed.

• Geomechanics and Engineering
• /
• 제33권5호
• /
• pp.427-437
• /
• 2023

The objective of this work is to study the wave propagation of an FGM plate via a new integral inverse shear model with temperature-dependent material properties. In this contribution, a new model based on a high-order theory field of displacement is included by introducing indeterminate integral variables and inverse co-tangential functions for the presentation of shear stress. The temperature-dependent properties of the FGM plate are assumed mixture of metal and ceramic, and its properties change by the power functions of the thickness of the plate. By applying Hamilton's principle, general formulas of wave propagation were obtained to plot the phase velocity curves and wave modes of the FGM plate with simply supported edges. The effects of the temperature and volume fraction by distributions on wave propagation of the FGM plate are investigated in detail. The results of the dispersion and the phase velocity curves of the propagation wave in the functionally graded plate are compared with previous research.

• 대한화학회지
• /
• 제37권9호
• /
• pp.793-799
• /
• 1993

$C_{18}$ 칼럼을 정지상으로 사용한 역상 액체크로마토그래피에서 수소성이 약한 tetramethylammonium bromide(TMAB)를 반대이온으로 사용하여 방향족 술폰산들의 머무름기구를 조사해 본 결과, 이온-쌍 모델이 우세하였다. 분석물질들의 용량인자는 반대이온의 종류와 농도, 메탄올과 co-anion의 농도, 분석물질속에 있는 작용기의 종류와 위치 및 이동상의 pH 등의 영향을 받았다. 최적 조건하에서 분석물질들의 혼합물을 효과적으로 분리할 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.99.1-99.1
• /
• 2011

Reactant mixing has a critical role in ensuring reformate quality and an important design objective is to achieve sufficiently complete mixture of reactants. For that purpose it is required to understand the coupled transport-kinetics phenomena in the mixing region. Three-dimensional computational fluid dynamics model was developed and validated in previous works. The mixing characteristics in various alternatives of a prototype mixing chamber were compared, and then a reduced reaction kinetics was applied to two extreme designs for investigating the impact of gas-phase reactions. Both designs did not reach threshold ethylene mole fraction of 0.001, but surprisingly more ethylene was generated in the design having better mixing characteristics. The presentation will deliver the development process of coupled transport and kinetics model briefly and the detailed information about the mixing characteristics and gas-phase reactions in two mixer designs.

• Geomechanics and Engineering
• /
• 제10권1호
• /
• pp.49-57
• /
• 2016

The high permeability-high strength concrete belongs to the typical of porous materials. It is mainly used in underground engineering for cold area, it can act the role of heat preservation, also to be the bailing and buffer layer. In order to establish a suitable model to predict the thermal conductivity and directly applied for engineering, according to the structure characteristics, the thermal conductivity predicting model was built by resistance network model of parallel three-phase medium. For the selected geometric and physical cell model, the thermal conductivity forecast model can be set up with aggregate particle size and mixture ratio directly. Comparing with the experimental data and classic model, the prediction model could reflect the mixture ratio intuitively. When the experimental and calculating data are contrasted, the value of experiment is slightly higher than predicting, and the average relative error is about 6.6%. If the material can be used in underground engineering instead by the commonly insulation material, it can achieve the basic requirements to be the heat insulation material as well.

• 산업기술연구
• /
• 제11권
• /
• pp.3-16
• /
• 1991

The lattice-fluid theory are adopted for modeling the phese equilibria in supercritical fluids, In order to investigate effects of the nonrandom distribution of holes in mixtures on the phase equilibria, the equation of state and the chemical potential of the binary miture are formulated with taking into account nonrandomness of holes distributions in the fluid mixture. The relations of phase equilibria formulated in this work are tested through predictions of solubility of heavy solids in supercritical fluids and predictions of high pressure phase equilibria of binary mixtures. Results obtained exhibit that the lattice fluid model with assumptions of nonrandomness of hole distributions is successful in quantatively mideling the phase equilibria of mixtures of molecules of dissimilar sizes, specifically solids-supercritical fluid mixtures.

• Macromolecular Research
• /
• 제13권1호
• /
• pp.39-44
• /
• 2005

Ion-exchange polymeric stationary phases presenting amino acid and amino groups were prepared by the surface grafting of glycidyl methacrylate onto a silica gel surface and subsequent amination. Three kinds of amino acids-L-arginine (Arg), D-lysine (Lys), and D-histine (His)-were used in this study. An ion-exchange polymeric stationary phase presenting ethylene diamine (EDA) was also prepared by surface graft polymerization. Separation of the model proteins bovine serum albumin (BSA), chick egg albumin (CEA), and hemoglobin (Hb) was performed using the amino acid- and amine-derived columns. In separating the CEA/BSA mixture, the resolution time of BSA was longer than that of CEA when using the EDA column, whereas the resolution time of BSA was shorter than that of CEA when using the Arg, Lys, and His columns. In the separation of the Hb/BSA mixture, the resolution time of BSA was longer than that of Hb in the EDA column, whereas the resolution time of BSA was shorter than that of Hb in the amino acid columns (D-Lys, L-Arg, and D-His).

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.139-148
• /
• 1999

In oder to analyze the effect of operating conditions on pulverized coal combustion, a numerical study is conducted at the pulverized coal combustor. Eulerian approach is used for the gas phase, whereas Lagrangian approach is used for the particle phase. Turbulence is modeled using standard ${\kappa}-{\varepsilon}$ model. The description of species transport and combustion chemistry is based on the mixture fraction/probability density function(PDF) approach. Radiation is modeled using P-l model. The turbulent dispersion of particles is modeled using discrete random walk model. Swirl number of secondary air affects the flame front, particle residence time and carbon conversion. Primary/Secondary air mass ratio also affects the flame front but little affects the carbon conversion and particle residence time. Air-fuel ratio only affects the flame front due to lack of oxygen. Radiation strongly affects the flame front and gas temperature distribution because pulverized coal flame of high temperature is considered.

• 한국분말재료학회지
• /
• 제9권6호
• /
• pp.422-432
• /
• 2002

Mechanically driven decomposition of intermetallics during mechanical milling(MM 1 was investigated. This process for Fe-Ce and Fe-Sn system was studied using conventional XRD, DSC, magnetization and alternative current susceptibility measurements. Mechanical alloying and milling form products of the following composition (in sequence of increasing Gecontent): $\alpha$(${\alpha}_1$) bcc solid solution, $\alpha$+$\beta$-phase ($Fe_{2-x}Ge$), $\beta$-phase, $\beta$+FeGe(B20), FeGE(B20), FeGe(B20)+$FeGe_2$,$FeGe_2$,$FeGe_2$+Ge, Ge. Incongruently melting intermetallics $Fe_6Ge_5$ and $Fe_2Ge_3$ decompose under milling. $Fe_6Ge_5$ produces mixture of $\hat{a}$-phase and FeGe(B20), $Fe_2Ge_3$ produces mixture of FeGe(B20) and $FeGe_2$ phases. These facts are in good agreement with the model that implies local melting as a mechanism of new phase for-mation during medchanical alloying. Stability of FeGe(B20) phase, which is also incongruently melting compound, is explained as a result of highest density of this phase in Fe-Ge system. Under mechanical milling (MM) in planetary ball mill, FeSn intermetallic decomposes with formation $Fe_5Sn_3$ and $FeSn_2$ phases, which have the biggest density among the phases of Fe-Sn system. If decomposition degree of FeSn is relatively small(<60%), milled powder shows superparamagnetic behavior at room temperature. For this case, magnetization curves can be fitted by superposition of two Langevin functions. particle sizes for ferromagnetic $Fe_5Sn_3$ phase determined from fitting parameters are in good agreement with crystalline sizes determined from XRD data and remiain approximately chageless during MM. The decomposition of FeSn is attributed to the effects of local temperature and local pressure produced by ball collisions.