• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.10
• /
• pp.1518-1523
• /
• 2003

This experiment was conducted to investigate the effect of various feeding regimens on growth performance, nutrient digestibilities, nitrogen retention, blood urea nitrogen (BUN) concentration and feed cost in young pigs weaned at 21 days of age. One hundred twenty crossbred pigs (Landrace${\times}$Large White${\times}$Duroc, average 6.8 kg BW), weaned at 21 days of age, were allotted to 5 treatments in a 5 replicates by a randomized completely block (RCB) design. Treatments were as follow: 1) 1P (1-4 weeks: CP 23% and lysine 1.60%), 2) 2P-I (1 week: CP 23% and lysine 1.60%, 2-4 weeks: CP 21% and lysine 1.45%), 3) 2P-II (1-2 weeks: CP 23% and lysine 1.60%, 3-4 weeks: CP 21% and lysine 1.45%), 4) 2P-III (1-3 weeks: CP 23% and lysine 1.60%, 4 week: CP 21% and lysine 1.45%), 5) 3P (1 week: CP 23% and lysine 1.60%, 2-3 weeks: CP 21% and lysine 1.45%, 4 week: CP 19% and lysine 1.30%). Three different diets were formulated and supplied according to phase feeding programs. Diet 1 contains 23% crude protein and 1.60% lysine, diet 2 contains 21% crude protein and 1.45% lysine and diet 3 contains 19% crude protein and 1.30 lysine, respectively. Although there was no significant difference in growth performances, there was a beneficial effect of 3 phase feeding. The ADG was higher in 3P treatment than other treatments and it was observed clearly in late period (3-4 weeks) than in early period. Also, with increase in age, growth rate of pigs in 3P treatment was higher than that in 1P treatment approximately 37% (p=0.1379). There were no significant differences among all treatments in nutrient digestibility. The concentration of BUN was higher in pigs were fed diet containing 21% crude protein and 1.45% lysine (eg, 2P-1 and 3P) than those supplied diet containing high nutrient value at 2 week. The lowest feed cost/kg weight gain of pigs showed in 3P among treatments (p<0.05) whereas, high feed cost/kg weight gain of pigs was calculated in 1P and 2P-II treatments compared with 2P-I and 2 P-II (p<0.05), because of high milk products were used in those diet.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.11
• /
• pp.1496-1502
• /
• 2010

Two experiments were conducted to evaluate the effects of diet complexity and fermented soy protein on growth performance and amino acid digestibility. In Exp. 1, a total of 120 crossbred weanling pigs ($5.68{\pm}0.80\;kg$ BW) were randomly allocated into 4 treatments. Each treatment had 6 replicate pens comprising 5 pigs in each replicate. Experimental diets consisted of simple (soybean meal as protein source) and complex (soybean meal, rice protein concentrate, potato protein concentrate and fish meal as protein sources) diets; each diet contained 0 or 5% fermented soy protein (FSP), respectively. Dietary treatments included: i) simple diet; ii) simple diet with 5% FSP; iii) complex diet; iv) complex diet with 5% FSP. Pigs were provided each experimental diet for 20 d (phase 1) and then fed the same common diet for 10 d (phase 2). During days 0-10, pigs fed FSP diets had greater ADG than those fed non-FSP diets (p<0.05). G/F in FSP treatments was significantly higher than that in non-FSP treatments (p<0.05) from days 0 to 10. Throughout the overall period, G/F was greater in FSP treatments compared with non-FSP treatments (p<0.05). On d 10, N digestibility was higher in pigs fed FSP diets than in those fed non-FSP diets (p<0.05). Diet complexity did not affect growth performance and nutrient digestibility (p>0.05) in this experiment. In Exp 2, 12 ileal-cannulated, weanling barrows were housed in individual metabolism crates and randomly assigned to 1 of 4 treatments (same as Exp. 1) by using a $4{\times}4$ Latin square design. Among the essential amino acids, apparent ileal digestibility (AID) of Met and Val were increased in pigs fed FSP diets compared with those fed non-FSP diets (p<0.05). AID of Met, Phe and total essential amino acids were higher in pigs fed complex diets than in those fed simple diets (p<0.05). Among the non-essential amino acids, AID of Ala in FSP treatments was greater than that in non-FSP treatments (p<0.05). In addition, Asp, Cys, Glu, Pro, Ser and total non-essential amino acid digestibilities in pigs fed complex diets were higher compared with those fed simple diets (p<0.05). Interaction was observed in AID of Met, Asp and Pro. In conclusion, these results indicated that feeding of 5% FSP to nursery pigs improved feed efficiency and AID of amino acids, and diet complexity did not maximize the growth performance of pigs in the subsequent phase.

• Journal of Pharmaceutical Investigation
• /
• v.27 no.1
• /
• pp.29-38
• /
• 1997

Precipitation was formed during the preparation of decoction from a mixture of Scutellariae Radix and Coptidis Rhizoma. Baicalin and berberine were identified in this coprecipitated product (CPP) and these components were the active ingredients of two herbal medicine. We extracted respectively crude baicalin and berberine in Scutellariae Radix and Coptidis Rhizoma and prepared coprecipitate of crude baicalin-berberine. To increase the stability and bioavailability of coprecipitate of crude baicalin-berberine(CBB), which is slightly soluble drug, its inclusion complex was prepared and studied in this experiment. Inclusion complex of CBB with ${\beta}-cyclodextrin(CBB-{\beta}-CD)$ was prepared by freeze drying method and its characteristics were ascertained by means of solubility test, differential thermal analysis(DTA) and scanning electron microscope(SEM). The type of $CBB-{\beta}-CD$ is classified as $A_L-type$ on phase solubility diagram, and the stoichiometric ratio of CBB(baicalin in CBB) : ${\beta}-CD$ complex is 1:1 and formation constant is 151 $M^-1$. The solubility, dissolution, in situ absorption and serum concentration of $CBB-{\beta}-CD$ were significantly increased when compared to CBB. Therefore enhanced bioavailability of CBB by inclusion complexation with ${\beta}-cyclodextrin$ might be useful for dosage form design of active ingredients of two herbal medicine.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.2 s.3
• /
• pp.1-12
• /
• 2003

DAB(Digital audio broadcasting) is a next generation radio broadcasting system which provides CD quality audio, various data services and superior reception ability when moving. Also, it can show traffic informations and news literally or graphically. In this paper, we design and fabricate the DAB tuner for ITS service that follows Eureka-147 and ETSI 300 401 specifications. This small-sized tuner can be adopted to mny electronic equipments such as a Hi-Fi audio, DVD player, car audio system etc.. The overall performance of the tuner depends on a phase noise of VCO and the sensitivity of the receiving system is influenced by LNA, image rejection filter and channel selection filter. All our measurement results satisfy the specification for a DAB system with the return loss of 9dB, the noise figure of 6dB for both Band 111 and L-band and the sensitivity of -97dBm.

• Animal Bioscience
• /
• v.36 no.5
• /
• pp.776-784
• /
• 2023

Objective: This experiment was conducted to evaluate the inclusion of dietary nontoxic sulfur (NTS) on growth performance, immune response, sulfur amino acid composition and meat characteristics in growing-finishing pigs. Methods: A total of 140 crossbred pigs ([Yorkshire×Landrace]×Duroc) with an average body weight of 34.73±0.66 kg were used for the 12-week feeding trial. Experimental pigs were allotted to one of 5 treatments in 4 replicates of 7 pigs per pen in a randomized complete block (RCB) design. The experimental treatments were as follows (0%, 0.1%, 0.2%, and 0.4% NTS levels): i) Control, corn soybean meal (SBM)-based diet; ii) NTS 0.1, basal diet + NTS 0.1%; iii) NTS 0.2, basal diet + NTS 0.2%; iv) NTS 0.4, basal diet + NTS 0.4%. Results: Body weight increased linearly as dietary NTS levels increased up to 0.2% (linear; p = 0.04) in the early finishing phase (9 weeks). During the whole experimental period, body weight and average daily gain linearly increased as the dietary NTS level increased in the diet (linear; both p = 0.01), but quadratic responses in body weight and average daily gain were observed with the addition of NTS 0.4% (quadratic, both p = 0.01). In the late finishing period, the IgG concentration increased linearly (linear; p = 0.01) as the dietary NTS level increased up to 4%. In the finishing period, a linear response was observed as a dietary NTS level was added (linear; p = 0.03), and supplementation with 0.2% NTS resulted in a higher methionine content than the other treatments (quadratic; p = 0.01). NST 0.2% had a lower value of thiobarbituric acid reactive substances (quadratic; p = 0.01). Conclusion: Consequently, supplementation with dietary NTS up to 0.2% could improve growth performance, amino acid composition in hair and meat antioxidation capacity.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.618-619
• /
• 2010

LED는 기존의 발광원에 비해 훨씬 높은 파워와 효율성으로 인해 최근 들어 각종 조명이나 교통신호 등에서 사용이 급증하고 있다. LED 재료를 위해 지금까지 여러가지가 연구되어 왔는데, 갈륨 질화물 (Gallium Nitride, GaN)에 기반한 시스템이 최근들어 가장 큰 관심을 받고 있다. GaN 방식은 열적으로 매우 안정성이 있고, 1.9 ~ 6.2 eV 범위의 넓은 밴드의 Gap, 그리고 인듐이나 알루미늄과 결합하여 청, 녹, 백색등의 다양한 빛을 발생할 수 있는 장점을 가지고 있다. 예를 들어 청색 LED는 광학 방식의 기록매체에, 백색 LED는 기존의 조명램프의 대체용으로 활용이 가능하다. 이러한 장점 덕분에 GaN기반 LED 시장은 1994년에 최초로 상용화 된 이래 최근 급격한 성장을 보여 왔다. 그러나 GaN은 다른 III~V 타입의 반도체 재료와는 달리 재료가 성장하기 위해 사파이어와 같은 별도의 기판을 필요로 하는 문제가 있다. 이것은 결국 전위발생과 같은 격자의 부조화 같은 문제를 야기하여 결국 LED의 성능을 떨어뜨리는 요인이 된다. 이러한 문제를 해결하기 위해 HVPE(Hydride Vapor Phase Epitaxy) 방법이 개발되었는데, 이 방법은 시간당 100 미크론의 매우 빠른 성장속도로 높은 두께의 레이어를 만드는 장점이 있다. 이렇게 성장된 GaN 레이어는 베이스 기판에서 쉽게 분리되어 활용이 가능하다. 그러나 HVPE 기술은 성장 공정에서 두께를 균일하게 만들도록 제어하는 것이 매우 어렵다는 문제가 있다. 따라서 HVPE 방식에서는 이러한 조건을 만족시키기 위해 반응현상에 대한 물리적 해석을 토대로 공정조건을 정밀하게 설계해야 한다. 이를 위해 최근에 실험 또는 시뮬레이션을 활용하여 이러한 공정조건을 향상시키기 위한 여러 연구가 진행되었다. 본 연구에서는 이러한 연구의 일환으로 반응로에 투입되는 여러 기체의 유량과 존별 주변온도 조건을 입력변수로 하고, 이들이 GaN 성장에 미치는 영향을 분석하였다. HVPE 시스템에서 가장 이상적인 목표는 반응기체가 층류유동을 유지하면서 대부분의 반응이 기판위에서 이뤄지며, 기판위에서 성장되는 재료의 두께가 균일하게 되는 것이다. 입력변수들이 이러한 결과에 어떠한 영향을 미치는 지 분석하기 위해 전산유체역학(CFD, Computational Fluid Dynamics)을 수행하는 상용코드 FLUENT를 사용하였다. 보다 실제에 가까운 해석을 위해서는 기체간의 화학반응을 포함해야 하나, 해석의 편의와 효율을 위해 본 연구에서는 열 및 유동해석만을 수행하였다. 한편 실제 반응로의 우수성은 성장속도와 두께분포의 균일도를 통해 평가된다. CFD 해석을 통해 이들을 분석하기 위해 기존에 수행한 실험조건을 해석하고 해석결과의 유동패턴/압력분포를 실험결과의 성장속도/두께분포와 비교하고, 이중에서 관련성이 높은 해석결과변수를 우수성 평가에 활용하였다. 기존의 실험결과를 토대로 이러한 중요 결과변수와 함께 이들에 대한 목표값이 도출되고 나면, 입력 공정조건 - 사용기체의 유량과 주변온도 조건 - 에 대해 실험계획(DOE,Design of Experiment)을 수립하고 목표성능을 구현하기 위한 최적설계를 수행할 수 있다. 일반적으로 CFD를 통해 최적의 설계나 공정조건을 탐색하는 작업은 1회의 CFD 계산시간이 매우 오래 소요되기 때문에 쉽지 않다. 그러나 본 연구에서는 CFD와 DOE의 적절한 조합을 통해 적은 수의 해석을 가지고도 원하는 결과를 효율적으로 얻는 것이 가능함을 입증하고자 한다. 본 발표에서는 아직 이러한 연구가 완성되지 않은 시점에서 제반 연구개요를 소개하고 현 시점까지의 연구 결과 및 향후 계획을 소개하고자 한다.

• Animal Bioscience
• /
• v.34 no.1
• /
• pp.154-160
• /
• 2021

Objective: The effect of environmental enrichment on the behaviour of piglets in the nursery phase was evaluated. Methods: A total of 450 hybrid pigs (21 day old), including both females and uncastrated males, weighing approximately 6 kg, were distributed in a completely randomised design with 3 treatments and 3 replicates of 50 animals each. The treatments were: i) pen without environmental enrichment (control), ii) treatment consisting of continuous environmental enrichment (CEE) with rubber balls throughout the experimental period, and iii) treatment consisting of environmental enrichment with washed balls (EEWB) during the whole experimental period which were removed daily for washing. For the behavioural evaluation, 10 animals were randomly selected per replicate. The behavioural assessments were performed once a week, from 8 am to 6 pm, using images captured with a video camera. The data were submitted to non-parametric analyses, the means were compared using the Bonferroni test, and Person's correlations were also calculated. Results: A statistical difference (p = 0.001) was observed in the B5 (playful) behaviour; the animals in the EEWB treatment group had a higher frequency of this behaviour than animals in the control treatment group. The animals in the control group showed a higher frequency of B7 behaviour (lying down) (p = 0.026) than those in the EEWB and CEE treatment groups. The animals in the control group had a higher frequency of the B9 (belly nosing) behaviour than those in the EEWB group (p = 0.015). There was a tendency towards a higher frequency of behaviour B3 (walking in the pen) (p = 0.067) when the animals received the control treatment than treatments EEWB or CEE. Conclusion: The use of an enriching object improved the animal welfare and altered the correlation between the evaluated behaviours compared to the animals that did not have environmental enrichment.

• Journal of the Korean Society for Railway
• /
• v.16 no.1
• /
• pp.7-13
• /
• 2013

A scaled version of a roller rig is developed to demonstrate the dynamic characteristics of a railway vehicle for academic purposes. This rig is designed based on Jaschinski's similarity law. It is scaled to 1/10 of actual size and allows 9-DOF motion to examine the up and down vibration of a train set. The test rig consists of three sub-hardware components: (i) a driving roller mechanism with a three-phase AC motor and an inverter, (ii) a bogie structure with first and second suspensions, and (iii) the vehicle body. The motor of the rig is capable of 3,600rpm, allowing the test to simulate a vehicle up to a maximum speed of 400Km/hr. Because bearings and joints are properly connected to the sub-structures, various motion analyses, such as a lateral, pitching, and yawing motion, are allowed. The slip motion between the rail and the wheel set is also monitored by several sensors mounted in the rig. After the construction of the hardware, an experiment is conducted to obtain the natural frequencies of the dynamic behavior of the specimen. First, the test rig is run and data are collected from six sets of accelerometers. Then, a numerical analysis of the model based on the ADAMS program is derived. Finally, the measurement data of the first three fundamental frequencies are compared to the analytical result and the validation of the test rig is conducted. The results show that the developed roller rig provides good accuracy in simulating the dynamic behavior of the vehicle motion. Although the roller rig designed in this paper is intended for academia, it can easily be implemented as part of a dynamic experiment of a bogie and a vehicle body for a high-speed train as part of the research efforts in this area.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.3
• /
• pp.271-287
• /
• 2003

Statement of problem: Resonance frequency analysis (RFA) has been increasingly served as a non-invasive and objective method for clinical monitoring of implant stability. Many clinical studies must be required for standardized baseline data using RFA. Purpose: This study was performed to evaluate RFA value changes in two stage surgery group and one stage surgery group in patients. Material and method: Forty-seven mandibles in consecutively implant installed patients were selected for this study and 141 fixtures were installed. Ninety-three fixtures were double threaded, machined surface design ($Br{\aa}anemark^{(R)}$ MK III, Nobel Biocare AB, Goteborg, Sweden) and 48 fixtures were root form, threaded, HA-coated surface one ($Replace^{TM}$, Steri-Oss/Nobel Biocare AB, USA). Among those, each 10 fixture was installed in one stage group patients. ISQ values were measured using $Osstell^{TM}$ (Integration Diagnostics Ltd. Sweden) during fixture installation, at healing abutment connection and in the loading period for two stage surgery group patients and during at each 4, 6, 8, 10, 12week and in the loading phase for one stage surgery group patients and evaluated the changes according to the time and fixture type. Results: In two stage surgery group, mean and SO of ISQ values of machined surface implants were $76.85{\pm}3.74,\;75.76{\pm}5.04,\;75.73{\pm}4.41$ and those of HA-coated surface implant were $75.05{\pm}6.23,\;77.58{\pm}5.23,\;78.32{\pm}4.29$ during fixtures installation, at healing abutment connection and in the loading period, respectively. In one-stage surgery group, the ISQ values of machined surface and HA-coated surface implants decreased until 4 or 6 week and maintained at plateau for 1-3 week and increased to the loading period. Conclusions: Machined and HA-coated surface implants showed minimal ISQ changes with time if they were installed at the sites showing at least intact cortical plate and good bone qualities. And HA-coated implants had a tendency to show somewhat increased ISQ values with time.