• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.265-274
• /
• 2011

In this paper, it is studied on wide radiating slot antenna's miniaturization for ultra wide-band(UWB) technologies and notch structure to prevent interference between UWB systems and existing wireless systems for using Wi-Fi service of IEEE standards 802.11 a/n. Proposed antenna that wide slot is decreased from $\lambda/2$ to $\lambda/4$ length of resonant frequency has decreased by 72 % compared with conventional antenna. And optimized T-shaped CPW-fed stub has satisfied UWB bandwidth for 3.0~11.8 GHz. Then, creating 2-order Hilbert curve slot line in the stub's patch area, 4.9~5.6 GHz that centered frequency is 5 GHz is eliminated. Finally, the designed antenna constructed on FR4-epoxy has $20{\times}15\;mm^2$ dimension. The measured results that are obtained return loss under -10 dB through 3.2~11.8 GHz without Wi-Fi bandwidth, a linear phase characteristic, a stable group delay, and omnidirectional radiation patterns are presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.12
• /
• pp.1343-1351
• /
• 2010

In this paper, a novel patch antenna based on the metamaterial CRLH(Composite Right- and Left-Handed) structure is designed, implemented, and measured. Contrary to the standard microstrip patch's fundamental resonance mode of half-wavelength or its positive multiple, the proposed antenna shows the in-phase electric field over the entire antenna. The proposed antenna has a desired omni-directional field pattern which is typical characteristic of $\lambda/4$ monopole antenna, and also shows the merit of low profile. HFSS(High Frequency Structure Simulator) of Ansoft which is based on the FEM(Finite Element Method) is used to simulate the proposed antenna. FR-4 substrate of thickness 1.6 mm and relative permitivity 4.4 is used for the proposed antenna implementation. The implemented antenna showed VSWR (Voltage Standarding Wave Ratio)$\leq$2 for the frequency band from 2.63 GHz to 2.655 GHz which is used for S-DMB (Satellite-Digital Multimedia Broadcasting) service. And measured peak gain and efficiency are 2.65 dBi and 81.14 %, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.2
• /
• pp.92-98
• /
• 2012

The co-precipitation technique has been applied to synthesize biphasic calcium phosphate (BCP). $Ca(NO_3)_2{\cdot}4H_2O$, $(NH_4)_2HPO_4$, TEOS and $Mg(NO_3)_2{\cdot}6H_2O$ as the starting materials was used. After the heat treatment of powder crystalline phases HAp and ${\beta}$-TCP analysis showed a mixed phase. The overall spectra appear to have mainly two modes corresponding to characteristic $PO^{3-}_4$ and $OH^-$ groups. After immersion in Hanks' Balanced Salt Solution (HBSS) for 1 week a precipitation started to be formed with individual small granules on the specimen surface. An MTT assay indicated that ionic substituted BCP powders had no cytotoxic effects on MG-63 cells, and that they have good biocompatibility.

• Journal of the Korean Society of Costume
• /
• v.55 no.1 s.91
• /
• pp.25-42
• /
• 2005

Costume is a formative art expressed by active human unlike the field of other living formativeness, and an expression of social actions based on a style of culture in a period. Therefore, costume has a deep connection with a mode of living and is recognized as a 'culture for living', and is more characteristic culture than all metaphysical cultures including architecture, craft, painting, and sculpture. Therefore, it expresses wearer's status or social standing, and furthermore, ideas and values of the times with aesthetic features in their form, color, materials, and pattern, so it is expressed as a mirror reflecting the phases of the times as. Korean costume had been dressed until the period of the Joseon Dynasty without a great change and started to be simplified in a simple style on the grounds of inconvenience in behaviors with the opening of an interchange of Western culture in the civilized period. And, this movement had been continued and Korean costume had been applied as an everyday dress under the name of 'Reformed Korean Costume'. Since the middle phase of 1980s, it aroused many people's interests with the introduction of designs focused on activity and convenience. In 1990's, many people had taken a growing interest in Korean costume with development of various designs keeping pace with the internationalization period and Korean Costume had been revitalized under the name of 'The Modernized Korean Costume'. And, since the 21st century, the advanced communication and full-scaled import of Western fashion have made the introduction of many fashion information in the world into Korea, affected greatly the fashion market, led consumers' sensitivity on a trend to be increased. Therefore, a design accepting a trend 'The Modernized Korean Costume' with fashions has risen. Second, this study is an attempt to suggest a revitalization method of domestic casual Korean costume brands by developing and suggesting competitive and highly value-added products with connection of practicality, variety, and highly sensitive fashion styles. For theoretical study, domestic and foreign literatures, academic journals, professional monthly magazines, and newspapers were examined. And, a process of change and features of the Korean fashion since the civilization period, and concept, features and images of casual Korean costume were analyzed, On the basis of analyzing image, features, and consumers' preference of the modernized Korean costume, a design development plan was established and 10 suits of costume were designed and made.

• Korean Journal of Optics and Photonics
• /
• v.10 no.4
• /
• pp.342-347
• /
• 1999

As the waveguide width and the radius of curvature get smaller for the effort of monolithic fabrication of integrated photonic devices, the waveguide characteristics change significantly according to the change of the waveguide width or the radius of curvature. Especially, variation of the waveguide width due to fabrication process errors induces a phase error for each waveguide from the change of the propagation constant. Therefore, it is important to quantify these variation effects on the device characteristics for the design and fabrication of highly integrated photonic devices. Here, we analyze four different types of waveguides to get general characteristics in propagation constant change by utilizing the effective index method and the analytic solution method. Futhermore, the output characteristics of two AWG(Arrayed Waveguide Grating) devices are simulated by a highly-functional computer code. The simulated results have been found to be similar to the realistic device characteristics. The required fabrication error limit for the ridge-type InP-AWG device should be smaller than 0.02 ${\mu}{\textrm}{m}$ to get better channel crosstalk than-25 dB, while the required fabrication error limit for rib-type silica-AWG devices may be allowed up to 0.1 ${\mu}{\textrm}{m}$ to obtain better crosstalk than -30 dB.

• Journal of Life Science
• /
• v.21 no.12
• /
• pp.1740-1745
• /
• 2011

Volatile flavor compounds of 3 commercial products of black onion extract (produced in Changnyeong, Muan and Jeungpyeong) purchased in the online/offline markets were analyzed. A total of 51 compounds were detected in samples by solid phase microextraction (SPME)/GC/MSD, consisting mainly of carbonyl compounds (15), sulfur-containing compounds (8), aromatic compounds (6), furans (6), nitrogen-containing compounds (3), alcohols (2), acids (2) and miscellaneous compounds (10). Among carbonyls, 4 compounds including 2-methylbutanal, 3-methylbutanal, nonanal and benzaldehyde were detected in all samples, while two sulfur containing compounds, dimethyl disulfide and dimethyl trisulfide, were detected in high amounts and considered to be key flavors in black onion extracts. Particularly, thiophenes and 3 sulfur containing compounds (methylpropyl disulfide, methyl-(Z)-propenyl disulfide and methyl-(E)-propenyl disulfide) were detected only in two products. With acetic acid, furfural and pyrazines that formed through Maillard reaction during black onion aging were detected in high amounts in all samples. This also contributed to characteristic flavors such as roasted, sweet, and sour, in the flavor of black onion extracts.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.4 s.95
• /
• pp.380-388
• /
• 2005

This paper presents analysis results of the effects of RF filter characteristics on the system performance of impulse radio. The impulse radio system transmits modulated pulses having very short time duration and information can be extracted in receiver side based on cross-correlation between received and transmitted pulses. Accordingly, the pulse distortion due to in-band group delay variation can cause serious system performance degradation. In general, RF bandpass filters inevitably cause group delay difference to the signal passing through the filter which is proportional to its skirt characteristic due to its resonance phenomenon. For time as well as frequency domain analysis, small signal scattering parameter $S_{21}$ and its Fourier transform are used to characterize output pulse waveform under the condition that the input and output ports are matched. The output pulse waveform of the filter is predicted based on convolution integral between input pulse and filter transfer function, and resulting BER performances in the BPM and PPM based impulse radio system are calculated.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.389-398
• /
• 2011

In this paper, the design and fabrication of a transmit/receive(T/R) module for Ka-band phased array radar is presented. A 5bit digital phase shifter and digital attenuator were used in common for both transmitter and receiver considering unique Ka-band characteristic. The circulator was excluded in the T/R module and was placed outside T/R module. The transmitting power per element antenna is designed to be about 1 W and the noise figure is designed to be below 8 dB. The designed T/R module RF part has a compact size of $5\;mm{\times}4\;mm{\times}57\;mm$. In order to implement the T/R module, MMICs used in T/R module was separately assessed before assembly of the designed T/R module. The transmitter of the fabricated T/R module shows about 1 W at 5 dBm unit module input power and the receiver shows a gain of about 20 dB and a noise figure of below 8 dB as expected in the design stage.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.6
• /
• pp.560-568
• /
• 2005

The proposed Multi-level PDP sustain Driver is composed of the semiconductor devices with low voltage rating compared to those used in the prior circuit proposed by L. Wether, and it has two resonant periods during the charging (rising period) and discharging (falling period) the PDP in the sustaining voltage waveforms. In accordance with the change of timing phase$(T_{r1},\;T_{i1},\;T_{r2})$, the performance characteristics of a commercial PDP module has been carried out and compared the characteristic with the 42V6, made of LG Electronics co., Experimental results show that the performance characteristics of PDP module are greatly influenced by the variation of $T_{i1}\;and\;T_{r2}$. The variation of $T_{r1}$ do not influence much on the performances of PDP. With the conditions that $T_{r1}=60ns,\;T_{i1}=120ns,\;and\;T_{r2}=350ns$, we could get the performances listed as the luminance is increased $14.6\%$, the power consumptions is decreased $5.9\%$, the panel efficiency is increased $24.2\%$, module efficiency is increased $21.2\%$, compared to those shown in the commercial PDP module (42V6). Therefore, the proposed multi-level PDP sustain driver expected to be suitable to actual PDP module application.

• Journal of the Korean Institute of Oriental Medical Informatics
• /
• v.14 no.1
• /
• pp.55-61
• /
• 2008

The Taekwondo is the martial arts where possibility thousand Ul of history and the ancestor is put in with specific martial arts of our nation. Also it practiced with the self defense martial arts which rules over the body and a mind and it came, the country from crisis of imminent danger won a victory with the good state affair alcoholic beverage and it was come. The ancestors condition anger the Taekwondo where the soul is put in were born again with martial arts of the world and they became and the world-wide conference was adopted with the Olympic formal item which becomes the historian of of course sports and became the martial arts in the world-wide center. In like this features martial arts even from each country condition anger and the sports raises the phase of the country is racing with of course martial arts. Specially from China it makes the right shoe which is a Chinese martial arts with condition item and sports anger the features of the martial arts origination to do and there is a possibility of seeing the features which in the succession nose sleeping martial arts perforation defends it concentrates. The martial arts perforation character is letting in religion and philosophy thought of the Orient. Confucianism and Buddhism, it puts in the teaching of friendship thoughts and heaven and earth positive and negative principles, five lines and eight divination signs. Features of like this perforation our ancestors the positive and negative principles where the philosophy of the Orient is put in, there is a possibility of searching from life and the Taekwondo which it does with at five events together. With history of the ancestor it breathes together and all Taekwondo operation every one by one it puts in the thought of our ancestors as well. The some branch it tried to listen to the representative example which the feather holds hereupon in basic operation, the Taoist garment, the belt and width tax of Taekwondo. The flesh which is healthy in the spirit which is healthy holds the feather. Taekwondo Oh! as the true feelings one martial art which accomplishes the artificial flower of the dynamic thing and the static thing at end with the perforation essentially it is deep it will be able to confirm repeatedly fire tube characteristic.