• 한국세라믹학회지
• /
• 제30권11호
• /
• pp.955-961
• /
• 1993

Sintering behavior and microstructure development in the system ZnO-Bi2O3-CoO-Zn7Sb2O12 with Zn7Sb2O12 content(0.1mol%~2mol%) were studied. The pyrochlore phase was formed by the reaction of the Zn7Sb2O12 with Bi2O3 phase during heating (below 90$0^{\circ}C$). The formation temperature of the liquid phase (Bi2O3) was dependent on the Zn7Sb2O12 contents (about 74$0^{\circ}C$ for Bi2O3/Zn7Sb2O12>1 by the eutectic melting in the ZnOBi2O3 system, and about 110$0^{\circ}C$ for Bi2O3/Zn7Sb2O12 1 by the decomposition of pyrochlore phase). Hence, sintering behavior and microstructure development were determined virtually by the Bi2O3/Zn7Sb2O12 ratio, which were promoted by liquid (Bi2O3) phase and retarded by the pyrochlore (or spinel) phase. The grain growth of ZnO during sintering was sluggish with increasing Zn7Sb2O12 contents.

• Industrial Engineering and Management Systems
• /
• 제7권1호
• /
• pp.51-56
• /
• 2008

With growing demand for zero defects, predicting reliability of software systems is gaining importance. Software reliability models are used to estimate the reliability or the number of latent defects in a software product. Most reliability models to estimate the reliability of software in the literature are based on the development lifecycle stages. However, in the maintenance phase, the software needs to be corrected for errors and to be enhanced for the requests from users. These decrease the reliability of software. Software Reliability Growth Models (SRGMs) have been applied successfully to model software reliability in development phase. The software reliability in maintenance phase exhibits many types of systematic or irregular behaviors. These may include cyclic behavior as well as long-term evolutionary trends. The cyclic behavior may involve multiple periodicities and may be asymmetric in nature. In this paper, SGRM has been adapted to develop a reliability prediction model for the software in maintenance phase. The model is established using maintenance data from a commercial shop floor control system. The model is accepted to be used for resource planning and assuring the quality of the maintenance work to the user.

• 대한가정학회지
• /
• 제35권2호
• /
• pp.235-254
• /
• 1997

The purpose of this study was to examine the direction and the actual state of environmental behavior of domestic enterprises. This study focused on strategies of environmental management, manufacturing process, product distribution, and waste collection of a enterprise with regard to environmental behavior. the survey was conducted on 30 enterprises, using open type questionnaires. Results of the study were as follows : 1. Enterprises recognized the importance of environmental behavior. their environmental strategies were great, but the actual behavior was poor. 2. In the manufacturing process, environmental behavior was not practised well. 3. In the product distribution and the waste collection phase, they made little efforts for the environmental preservation.

• 분석과학
• /
• 제12권5호
• /
• pp.387-396
• /
• 1999

역상 액체크로마토그래피에서 몇가지 Co(II)-dithiocarbamate(DTC)의 머무름 거동을 고찰하였다. 얻어진 머무름 자료들을 van't Hoff plot하여 킬레이트가 이동상으로부터 정지상으로 전이하는 엔탈피와 엔트로로피를 각각 계산하였다. 엔탈피값에 대한 In k'의 의존성을 조사한 결과 이동상중 유기 용매의 비가 증가할수록 감소하였다. 그리고 $-{\Delta}H^0$와 In k를 도시한 직선의 기울기로부터 구한 보정 온도(${\beta}$)는 765.3-888.5 K 범위이었다. 따라서 DTC 킬레이트들의 머무름 거동은 온도변화에 무관하게 일정하며, 주로 소용매성 효과에 영향을 받는다는 사실을 확인하였다. 아울러 머무름 실험식 $log\;k^{\prime}=log\;{k_w}^{\prime}-S_{\varphi}$으로부터 얻어진 S 지수와 log k'과의 선형관계로부터, S 지수는 주로 DTC 킬레이트와 이동상의 상호작용에 영향을 받는다는 것을 알 수 있었다.

• 한국세라믹학회지
• /
• 제44권1호
• /
• pp.18-22
• /
• 2007

The phase transition behavior of $Ge_2Sb_2Te_5$ (GST) thin film, which is a candidate material of recording layer for phase change random access memory (PRAM), has been evaluated using an in-situ reflectance measurement method. The experimental data have been analyzed by using johnson-mehl-avrami-kolomogorov (JMAK) model. JMAK model can be used only in isothermal state. However, temperature changes with time during the operation of PRAM. To apply JMAK equation to PRAM simulation, it has been assumed that the temperature increases stepwise and isothermally. By using JMAK equation and assumption for the transient state, the phase transition behavior of GST thin film has been predicted under $3^{\circ}C/min$ heating rate in this study. The simulation result agrees well with the experimental results. Therefore, It can be concluded that JMAK equation can be used far the PRAM simulation model.

• 공업화학
• /
• 제10권2호
• /
• pp.324-329
• /
• 1999

본 연구에서는 고압하에서 이산화탄소와 이소프로필 알코올과의 이성분계에 대한 상평형데이터를 얻기 위해 실험을 수행하였다. 실험장치는 정지형 (static type)을 사용하였으며, 정확도를 실험하기 위해 $80^{\circ}C$에서 이산화탄소-이소프로필 알코올계의 실험을 수행하여 Radosz의 실험결과와 비교하였다. 이산화탄소-이소프로필 알코올과의 이성분계 상거동 실험은 온도 40, 60, 80, 100, 그리고 $120^{\circ}C$에서 실험하였으며, 이때 압력은 41~133 bar 범위였다. 이산화탄소-이소프로필 알코올계에 대해 동일한 압력에서 용해도는 온도가 증가함에 따라 증가함을 알 수 있다. 또한 순성분 이산화탄소와 이소프로필 알코올의 증기압을 서로 연결하는 혼합물 임계곡선을 나타내었다. 본 연구에서 실험한 결과를 statistical associating fluid theory (SAFT)상태방정식에 의해 계산하였으며, 그 결과 온도에 독립적인 두 파라미터에 의해 곡선을 결정하였다.

• 대한기계학회논문집
• /
• 제18권5호
• /
• pp.1192-1202
• /
• 1994

Fatigue behavior and life prediction were presented for thermal-mechanical and isothermal low cycle fatigue of 12Cr forged steel used for high temperature applications. In-phase and out-of-phase thermal-mechanical fatigue test at 350 to 600.deg. C and isothermal low cycle fatigue test at 600.deg. C were conducted using smooth cylindrical hollow specimen under strain-control with total strain ranges from 0.006 to 0.015. Cyclic softening behavior was observed regardless of thermal-mechanical and isothermal fatigue tests. The phase difference between temperature and strain in thermal-mechanical fatigue resulted in significantly shorter fatigue life for out-of-phase than for in-phase. The difference in fatigue lives was dependent upon the magnitudes of inelastic strain ranges and mean stresses. Increase in inelastic strain range showed a tendency of intergranular cracking and decrease in fatigue life, especially for out-of-phase thermal-mechanical fatigue. Thermal-mechanical fatigue life prediction was made by partitioning the strain ranges of the hysteresis loops and the results of isothermal low cycle fatigue tests which were performed under the combination of slow and fast strain rates. Predicted fatigue lives for out-of-phase using the strain range partitioning method showed an excellent agreement with the actual out-of-phase thermal-mechanical fatigue lives within a factor of 1.5. Conventional strain range partitioning method exhibited a poor accuracy in the prediction of in-phase thermal-mechanical fatigue lives, which was quite improved conservatively by a proposed strain range partitioning method.

• 지능정보연구
• /
• 제14권3호
• /
• pp.59-76
• /
• 2008

본 논문에서는 실시간 동적 환경에 효과적인 L-CAA 에이전트 구조를 제안한다. L-CAA 에이전트 구조는 변화하는 환경에 대한 적응성을 높이기 위해, 선행 연구를 통해 개발된 행위기반 에이전트 구조인 CAA에 강화학습 기능을 추가하여 확장한 것이다. 안정적인 성능을 위해 L-CAA 구조에서는 행위 선택과 실행을 학습에 전적으로 의존하지 않고 학습을 보조적으로 이용한다. L-CAA에서 행위 선택 메커니즘은 크게 두 단계로 나뉜다. 첫 번째 단계에서는 사용자가 미리 정의한 각 행위의 적용 가능 조건과 효용성을 검사함으로써 행위 라이브러리로부터 실행할 행위들을 추출한다. 하지만 첫 번째 단계에서 다수의 행위가 추출되면, 두 번째 단계에서는 강화학습의 도움을 받아 이들 중에서 실행 할 하나의 행위를 선택한다. 즉, 강화학습을 통해 갱신된 각 행위들의 Q 함수값을 서로 비교함으로써, 가장 큰 기대 보상값을 가진 행위를 선택하여 실행한다. 또한 L-CAA에서는 실행 중인 행위의 유지 가능 조건을 지속적으로 검사하여 환경의 동적 변화로 인해 일부 조건이 만족되지 않는 경우가 발생하면 현재 행위의 실행을 즉시 종료할 수 있다. 그 뿐 아니라, L-CAA는 행위 실행 중에도 효용성이 더 높은 다른 행위가 발생하면 현재의 행위를 일시 정지하였다가 복귀하는 기능도 제공한다. 본 논문에서는 L-CAA 구조의 효과를 분석하기 위해, 대표적인 동적 가상환경인 Unreal Tournament 게임에서 자율적으로 동작하는 L-CAA 기반의 에이전트를 구현하고, 이를 이용한 성능 실험을 전개해본다.

• 한국의류산업학회지
• /
• 제14권5호
• /
• pp.778-790
• /
• 2012

This research categorizes and analyzes different online fashion store studies conducted over the past 10 years based on study type. The results are as follows. First, it was found that 116 studies out of 118 studies on online fashion stores conducted from 2000 to 2012 were based on PC web. Second, the studies on PC web-based fashion stores were reclassified into 9 different categories based on their topics: purchase behavior, word-of-mouth behavior, website, and product information presentation as well as products for sale, return behavior, customer service, system, present condition, marketing strategy, and promotions. However, mobile web-based studies were categorized into 2 categories of introduction of the fashion stores and purchase behavior. Third, we reclassified the studies chronologically to observe studies conducted at different times. In the early phase (in addition to studies on purchase behavior) studies on present condition, marketing strategy, and website constituted the majority of studies conducted because the field research was just starting to grow; however, studies conducted in the latter phase showed new patterns of study, such as word-of-mouth effect, and return behavior. Future studies conducted on competitive PC web-based fashion stores require a more specific classification of studies (according to their purpose) to develop an effective marketing strategy.

• Corrosion Science and Technology
• /
• 제19권4호
• /
• pp.203-210
• /
• 2020

The corrosion behavior of super austenitic stainless steel was studied by examining the characteristics of the sigma phase formed in the steel. A range of experimental and analytical methods was employed, including potentiodynamic polarization tests, critical pitting temperature tests, transmission electron microscopy, and energy-dispersive spectroscopy. Three steel samples with different sigma phase levels were obtained by intentionally adjusting the manufacturing process. The results showed that the corrosion resistance of the samples was strongly dependent upon the size and distribution of the sigma phase precipitated in the samples. The larger the size of the sigma phase, the higher the Mo content in the sigma phase and the higher the depletion level of Mo at the interface between the matrix/sigma phase, the more samples with a coarse-sized sigma phase were susceptible to localized pitting corrosion at the interface. These results suggest that various manufacturing processes, such as welding and the post-heat treatment of the steel, should be optimized so that both the size and fraction of the sigma phase precipitated in the steel are small to improve the resistance to localized corrosion.