• Journal of Microbiology and Biotechnology
• /
• v.16 no.4
• /
• pp.605-612
• /
• 2006

A psychrotrophic bacterium was isolated from oil-contaminated groundwater and identified as Rhodococcus sp. YHLT-2. Growth was observed at the temperature of 4 to $30^{\circ}C$. This strain degraded various petroleum hydrocarbons such as crude oil, diesel oil, and gasoline over the whole range of temperatures tested. The Rhodococcus sp. YHLT-2 was capable of growing even at $4^{\circ}C$, exhibiting 90% of oil biodegradation after 20 days. Degradation of crude oil occurred at low temperature in nature. This strain was also able to grow at 7% NaCl, and utilized not only short chain alkenes $(C_9\;to\;C_{12})$, but also a broad range of long chain alkenes $(C_{19}\;to\;C_{32})$ present in crude oil at $4^{\circ}C$. The Rhodococcus sp. YHLT-2 is expected to be of potential use in the in situ bioremediation of hazardous hydrocarbons under low-temperature and high-salt conditions.

• Environmental Engineering Research
• /
• v.24 no.3
• /
• pp.484-494
• /
• 2019

This paper presents a preliminary investigation of the optimum nutrients combination required for bioremediation of spent-engine oil contaminated soil using Box-Behnken-Design. Three levels of cow-manure, poultry-manure and inorganic nitrogen-phosphorus-potassium (NPK) fertilizer were used as independent biostimulants variables; while reduction in total petroleum hydrocarbon (TPH) and total soil porosity (TSP) response as dependent variables were monitored under 6-week incubation. Ex-situ data generated in assessing the degree of biodegradation in the soil were used to develop second-order quadratic regression models for both TPH and TSP. The two models were found to be highly significant and good predictors of the response fate of TPH-removal and TSP-improvement, as indicated by their coefficients of determination: $R^2=0.9982$ and $R^2=1.000$ at $p{\leq}0.05$, respectively. Validation of the models showed that there was no significant difference between the predicted and observed values of TPH-removal and TSP-improvement. Using numerical technique, the optimum values of the biostimulants required to achieve a predicted maximum TPH-removal and TSP-improvement of 67.20 and 53.42%-dry-weight per kg of the contaminated soil were as follows: cow-manure - 125.0 g, poultry-manure - 100.0 g and NPK-fertilizer - 10.5 g. The observed values at this optimum point were 66.92 and 52.65%-dry-weight as TPH-removal and TSP-improvement, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.2
• /
• pp.375-383
• /
• 2000

A mixed culture isolated from petroleum-contaminated soil was enriched on toluene as a sole carbon and energy source, and degradation characteristics of BTEX(Benzene, Toluene, Ethylbenzene, Xylenes) was observed. In the single-substrate experiments, all the BTEX compounds were degraded, and it was degraded as following orders; toluene, benzene, ethylbenzene, and p-xylene. In the degradation experiments of BTEX mixtures, the degradation rate was decreased compared to that in the single substrate experiment and ethylbenzene was degraded faster than benzene. In the experiments of binary-mixtures, various substrate interactions such as inhibition, stimulation, and non-interaction were observed, and ethylbenzene was shown to be most potent inhibitor of BTEX degradation. In the degradation characteristic studies of xylene isomers, m-xylene and p-xylene were degraded as carbon sources, and it was stimulated in the presence of either benzene or toluene. However, degradation of o-xylene was enhanced only in the presence of benzene.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.549-551
• /
• 2001

The heavy use of petroleum products in modern livings has brought ubiquitous environmental contaminants of aromatic compounds, which persist in aquatic and geo-environment without the substantial degradation. The persistence and accumulation of the aromatic compounds, which include xylene, phenol, toluene, phthalate, and so on are known to cause serious problems in our environments. Some of soil and aquatic microorganisms facilitate their growth by degrading aromatic compounds and utilizing degrading products as growth substrates, the biodegradation helps the reentry of carbons of aromatic compounds, preventing their accumulation in our environments. The metabolic studies on the degradation of aromatic compounds by microoganisms were extensively carried out along with their genetic studies. A Rhodococcus sp. EL-GT isolated in activated sludges has shown the excellent ability to grow on phenol as a sole carbon source. In the present study investigated a gene encoding phenol-degrading enzymes from a Rhodococcus sp. EL-GT.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.66-69
• /
• 2002

In this work, cost effective venting is considered by comparing flow rates of 5$m\ell$/min, 10$m\ell$/min, and 20$m\ell$/min. Studies were performed on a soil artificially contaminated with diesel oil (the initial TPH(Total Petroleum Hydrocarbon) concentration of 7098mg/kg), and nutrient condition was C:N:P rate of 100:10:1. The soil has a sandy texture with pH of 6.8, 2.16 ~2.38% organic matter, a total porosity of 47~52% and field capacity 16.2~ 17.2%. The column experiments was made of glass column of 60cm length and 10cm I.D. at controlled temperature of 2$0^{\circ}C$($\pm$2.5$^{\circ}C$). The efficiency of continuous flow rate of 5, 10 and 20$m\ell$/min resulted in separately 61.3%, 58.1%, and 55% reduction of initial TPH concentration(7098mg/kg). Hydrocarbon utilizing microbial count and dehydrogenase activity in air flow of 5$m\ell$/min were higher than those of the others. The first order degradation rate of n-alkanes ranging from C10 to C28 was higher than that of pristane and phytane as isoprenoids. The $C_{17}$/pristane and $C_{18}$phytane ratios for monitoring the degree of biodegradation were useful only during the early stages of oil degradation. Degradation contributed from about 89% to 93% of TPH removal. Volatilization loss of diesel oil in contaminated soil was about 7% to 11%, which was significantly small compared to degradation.n.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1163-1168
• /
• 2011

Most transformers use insulating and cooling fluids derived from petroleum crude oil, but mineral oil has some possibility of environmental pollution and fire with explosion. vegetable oil fluids extracted from seed has superior biodegradation and fire-resistant properties including an exceptionally high fire point enhancing fire safety. In this study, it is aimed at the practicality of substituting natural ester dielectric fluid for mineral oil in liquid insulation system of transformers. As a rise in coil winding temperature has a direct influence on transformer life time, it is important to evaluate the temperature rise of coil winding in vegetable oil in comparison with mineral oil. Four transformers for the test are designed with 10KVA, 13.2KV, one phase unit. The temperature are directly measured in insulating oil of these transformers with the two sorts of natural ester and mineral oil dielectric fluid respectively. Experiment for aging carry out two means. First means remained $120^{\circ}C$ that transformer of mineral oil were operated at 185% load. Second means is that insulating oils of two natural ester and mineral oil were aged by thermal cycles repeating from $30^{\circ}C$ to $120^{\circ}C$. For the heating, Transformers were operated at 185% load. For the cooling, cooling system was operated in the chamber. Samples were analyzed at 42, 63, 93, 143, 190, 240 300cycles. Analysis contents are dielectric strength, total acid value. Mineral oils compared results of first means with results of second means. And compared two sort natural esters respectively with mineral oil in second means.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.3
• /
• pp.431-436
• /
• 2002

Effects of fertilizer additions for oil degradation were examined in sand seashore mesocosms. Within 37 days, up to $85\%$ removal was achieved by the addition of slow-release type fertilizer (SRF) with the initial degradation rate of 423.3 mg oil $(kg sand)^-1\;day^-1$. The removal was mostly of biological origin based on the changes of $C_17$ /pristane and $C_18$/phytane ratios from 2.60 to 0.81 and from 3.55 to 1.29, respectively. The addition of oleophilic fertilizer (Inipol EAP22) was less effective and resulted in the removal of $64\%$ of the added oil ($3\%$, v/v) with a lower initial degradation rate. Petroleum-degrading bacteria had achieved a value of $1{\times}10^8$ CFU $(g sand)^-1$ at Day 3 and this peak exactly coincided with the initial degradation in the SRF-treated mesocosm. In this mesocosm, surface tension values were decreased drastically during Days 3 and 8, suggesting that microbially-produced surface-active agents actively enhanced the oil degradation rate and cell proliferation. Although the Inipol-treated mesocosm appeared to show significantly enhanced oil degradation compared to that of the untreated control mesocosm, Inipol was found to be less effective than SRF in enhancing a true oil-degrader when compared under similar experimental conditions.

• Environmental Engineering Research
• /
• v.25 no.3
• /
• pp.290-298
• /
• 2020

A large residual fraction of aliphatic components of diesel prevails in soil, which has adverse effects on the environment. This study identified the most bio-recalcitrant aliphatic residual fraction of diesel through total petroleum-hydrocarbon fractional analysis. For this, the strain Acinetobacter sp. K-6 was isolated, identified, and characterized and investigated its ability to degrade diesel and n-alkanes (C₁₈, C₂₀, and C₂₂). The removal efficiency was analysed after treatment with bacteria and nutrients in various soil microcosms. The fractional analysis of diesel degradation after treatment with the bacterial strains identified C₁₈-C₂₂ hydrocarbons as the most bio-recalcitrant aliphatic fraction of diesel oil. Acinetobacter sp. K-6 degraded 59.2% of diesel oil and 56.4% of C₁₈-C₂₂ hydrocarbons in the contaminated soil. The degradation efficiency was further improved using a combinatorial approach of biostimulation and bioaugmentation, which resulted in 76.7% and 73.7% higher degradation of diesel oil and C₁₈-C₂₂ hydrocarbons, respectively. The findings of this study suggest that the removal of mid-length, non-volatile hydrocarbons is affected by the population of bio-degraders and the nutrients used in the process of remediation. A combinatorial approach, including biostimulation and bioaugmentation, could be used to effectively remove large quantities of aliphatic hydrocarbons persisting for a longer period in the soil.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.spc
• /
• pp.34-50
• /
• 2022

Principal component analysis (PCA) was conducted using hydrochemical data in four testbeds (A to D) built for the development of site characterization technologies to assess the hydrochemical processes controlling the hydrochemistry in each site. The PCA results indicated the nitrogen loading to deep bedrock aquifers through permeable fractures in Testbed A, the chemical weathering enhanced with the biodegradation of petroleum hydrocarbons in Testbed B, the reductive dechlorination in Testbed C, and the different hydrochemistry depending on the depth to bedrock in Testbed D, consistent with the characteristics of each site. In Testbeds B and D, outliers seemed to affect the PCA result probably due to the small number of samples, whereas the PCA result was still consistent with site characteristics. This study result indicates that the PCA is widely applicable to hydrochemical data for the assessment of major hydrochemical processes in contamination sites, which is useful for site characterization when combined with other site characterization technologies, e.g., geological survey, geophysical investigation, borehole logging. It is suggested that PCA is applied in contaminated sites to interpret hydrochemical data not only for the distribution of contamination levels but also for the assessment of major hydrochemical processes and contamination sources.

• Applied Chemistry for Engineering
• /
• v.35 no.4
• /
• pp.273-283
• /
• 2024

As the adverse environmental impacts due to plastic waste become more severe, there is an increasing demand for developing a sustainable ecosystem using biodegradable polymers. Biodegradable polymers are those that can be biochemically decomposed through the enzymatic activity of microorganisms. Currently, a variety of biodegradable polymers with varying properties is being investigated. In particular, polymer blends with an aim to control the biodegradation rate and mechanical properties are under active research. The biodegradable polymer industry, which has not yet reached economies of scale, does not have a cost advantage compared to petroleum-derived polymers. To overcome this challenge, there is an urgent need to expand its application fields to various high-value industries (separators, electronic materials, and medical fields). This review summarizes the current state-of-the-art biodegradable polymers, polymer blends, and recent research trends in new niche applications.