• Title/Summary/Keyword: Petroleum Oil

검색결과 667건 처리시간 0.03초

코노코사의 에너지수급전망

  • 대한석유협회
    • 석유와에너지
    • /
    • 1호통권11호
    • /
    • pp.66-68
    • /
    • 1982
  • 최근 국제석유정세는 수급면에서 소강상태를 유지하고 있고, 또 석유소비국들의 OPEC에 대한 의존도를 경감시키는데 도움을 주는 여러가지 중요한 변화가 보이고 있음에도 불구하고 80년대에 다시 석유수급의 혼란이 재발할 가능성이 큰것으로 Conoco사(ContinentalOil Co.)는 전망하고 있다. 다음은 이러한 전망을 뒷받침하는 코노코사의 에너지수급전망에 관한 자료이다. <편집자주>

  • PDF

수분함량에 따른 자동차용 휠베어링 그리스 품질특성 연구 (Performance of Automotive Wheel Bearing Grease by Water Contents)

  • 임영관;이은희;이정민;정충섭
    • Tribology and Lubricants
    • /
    • 제27권5호
    • /
    • pp.275-280
    • /
    • 2011
  • Automotive wheel bearing grease helps to reduce stresses and prevent wear of wheel bearings. But it is easily contaminated by water and other contaminants. In this study, we investigated the property change of automotive wheel bearing grease under water contamination. The result showed that some properties such as dropping point, work penetration and oxidation stability were not influenced by water content. However, most of properties such as work stability, water washout characteristics, leakage tendency, oil separation, evaporation loss and rust protection became worse after water was added. This is thought that added water makes the interaction weak between thickener and base oil of grease.

유류오염이 어체에 미치는 영향과 유성분 제거에 관한 연구 (Tainting and Depuration in Fish by Petroleum Hydrocarbon)

  • 강석중;최병대
    • 한국양식학회지
    • /
    • 제10권2호
    • /
    • pp.189-197
    • /
    • 1997
  • A series of short (8 hours) and long term (96 hours) exposure studies was conducted on a laboratory scale to evaluation (1) the threshold concentrations of petroleum hydrocarbon in seawater which can lead to tainting problems in yellow tail (Seriola quinqueradiata) and (2) the time to recover (depuration period) once the tainting has occurred. The water-soluble fraction (WSF) of crude oil was prepared by stirring the oil with cold seawater. The main component of the WSF were low-boiling aromatics, although these were only al small proportion of the starting oil. From the sencory evaluation it was concluded that the threshold hydrocarbon levels in seawater which will impart a taint in yellow tail fillets within a 8-hour exposure period (short exposure period) are in the range of 0.4 to 1.0 ppm and within a 96-hour exposure period (long exposure period) are in the range of 0.2 to 0.5 ppm. Depuration trials were carried out with WSF from crude oil. The fish were exposed for 48 hours to concentration of 2.5 ppm hydrocarbons. After 48-hour exposure period, the fish were allowed to depurate in fresh, uncontaminated seawater. Depuration time for these fish was 10 days. The taste panelists were able to detect the contaminated fillets very easily while the depurated fish could not be distiguished from the control.

  • PDF

Effect of HPAM on Calcium Carbonate Crystallization

  • Jing, Guolin;Tang, Shan;Li, Xiaoxiao
    • 대한화학회지
    • /
    • 제57권3호
    • /
    • pp.365-369
    • /
    • 2013
  • With the wide application of ASP (alkaline-surfactant-polymer) flooding, the scaling becomes more and more serious, which is harmful to the oilfield and environment. In order to investigate the effects of HPAM on calcium carbonate crystallization, the crystallization behaviors of $CaCO_3$ in HPAM (Hydrolyzed polyacrylamide) solutions were studied and the composition and morphology of $CaCO_3$ crystal were investigated in different concentrations of polyacrylamide solutions. The crystal forms and morphologies of $CaCO_3$ were characterized by Fourier transform infrared spectroscopy, X-ray diffraction and scanning electron microscopy. The results show that the crystallization of $CaCO_3$ is strongly influenced by the HPAM. The paper analyzed the internal cause, and the results show: The reasons leading to the change of morphology are carboxyl groups in polyacrylamide molecule and $Ca^{2+}$ in solution form chelates by coordination bond. And the chelates are adsorbed on the calcium hydroxide surfaces of solid-liquid interfaces so as to change the formation rate of calcium carbonate crystal nucleus. The research provides a reliable basis for the mechanism research of the scaling problem in the oil extraction process of ASP flooding and the adoption of scale inhibition and scale inhibitor.

석유개발-효율적 탐사관리에 대한 고찰

  • 최종호
    • 석유와에너지
    • /
    • 10호통권104호
    • /
    • pp.47-50
    • /
    • 1989
  • 이 자료는 'Oil & Gas Journal, May 22,1989'에 실린 Terry N. Cox, Salem, Ore.의 'Managing Exploration:the organization, manager, geologist'를 옮긴 것이다. <역자 주>

  • PDF

리포트 - IEA의 원유교역 전망

  • 류인권
    • 석유와에너지
    • /
    • 통권308호
    • /
    • pp.52-55
    • /
    • 2018
  • IEA는 "OIL 2018" 보고서를 통해 원유의 지역간 교역을 7개 권역(북중미, 남미, 유럽, 중동, 아프리카, 구소련연방, 아시아 등)으로 구분하고, 2023년까지의 교역변화를 전망하고 있음. 다음은 IEA의 보고서를 요약한 것임.

  • PDF

공기다단 적용 석유코크스 연료 전용 연소기에 대한 실험적 연구 (An Experimental Study of Petroleum Cokes Air Staged Burner)

  • 권민준;이창엽;김세원
    • 한국연소학회지
    • /
    • 제20권2호
    • /
    • pp.40-45
    • /
    • 2015
  • This study is aimed to study combustion characteristics of low $NO_X$ burner using petroleum cokes as fuel. The petroleum coke, which is produced through the oil refining process, is an attractive fuel in terms of its high heating value and relatively low price. But petroleum coke is a challenging fuel because of its low volatile content, high sulfur and nitrogen content, which give rise to undesirable emission characteristics and low ignitability. The petroleum cokes burner is operated at fuel rich condition, and overfire air are supplied to achieve fuel lean condition. The low $NO_X$ burner is designed to control fuel and air mixing to achieve air staged combustion, in addition secondary and tertiary air are supplied through swirler. Air distribution ratio of triple staged air are optimized experimentally. The result showed that $NO_X$ concentration is lowest when overfire air is used, and the burner function at a fuel rich condition.

Cementing failure of the casing-cement-rock interfaces during hydraulic fracturing

  • Zhu, Hai Y.;Deng, Jin G.;Zhao, Jun;Zhao, Hu;Liu, Hai L.;Wang, Teng
    • Computers and Concrete
    • /
    • 제14권1호
    • /
    • pp.91-107
    • /
    • 2014
  • Using the principle of damage mechanics, zero-thickness pore pressure cohesive elements (PPCE) are used to simulate the casing-cement interface (CCI) and cement-rock interface (CRI). The traction-separation law describes the emergence and propagation of the PPCE. Mohr-coulomb criteria determines the elastic and plastic condition of cement sheath and rock. The finite element model (FEM) of delamination fractures emergence and propagation along the casing-cement-rock (CCR) interfaces during hydraulic fracturing is established, and the emergence and propagation of fractures along the wellbore axial and circumferential direction are simulated. Regadless of the perforation angle (the angle between the perforation and the max. horizontal principle stress), mirco-annulus will be produced alonge the wellbore circumferential direction when the cementation strength of the CCI and the CRI is less than the rock tensile strength; the delamination fractures are hard to propagate along the horizontal wellbore axial direction; emergence and propagation of delamination fractures are most likely produced on the shallow formation when the in-situ stresses are lower; the failure mode of cement sheath in the deep well is mainly interfaces seperation and body damange caused by cement expansion and contraction, or pressure testing and well shut-in operations.

Hydraulic fracturing experiments of highly deviated well with oriented perforation technique

  • Zhu, Hai Y.;Deng, Jin G.;Liu, Shu J.;Wen, Min;Peng, Cheng Y.;Li, Ji R.;Chen, Zi J.;Hu, Lian B.;Lin, Hai;Guang, Dong
    • Geomechanics and Engineering
    • /
    • 제6권2호
    • /
    • pp.153-172
    • /
    • 2014
  • In order to investigate the effect of different perforation angles (the angle between the perforation direction and the maximum horizontal principal stress) on the fracture initiation and propagation during hydraulic fracturing of highly deviated well in oil & gas saturated formation, laboratory experiments of the hydraulic fracturing had been carried out on the basis of non-dimensional similar criteria by using 400^3 $mm^3$ cement cubes. A plane fracture can be produced when the perforations are placed in the direction of the maximum horizontal principal stress. When the perforation angle is $45^{\circ}$, the fractures firstly initiate from the perforations at the upper side of the wellbore, and then turn to the maximum horizontal principal stress direction. When the well deviation angle and perforation angle are both between $45^{\circ}$ and $90^{\circ}$, the fractures hardly initiate from the perforations at the lower side of the wellbore. Well azimuth (the angle between the wellbore axis and the maximum horizontal principal stress) has a little influence on the fracture geometries; however it mainly increases the fracture roughness, fracture continuity and the number of secondary fractures, and also increases the fracture initiation and propagation pressure. Oriented perforating technology should be applied in highly deviated well to obtain a single plane fracture. If the well deviation angle is smaller, the fractures may link up.