• 한국환경과학회지
• /
• 제4권5호
• /
• pp.115-115
• /
• 1995

Reuse of industrial effluents through the cooling systems in a petrochemical complex was described. The partial oxidation of the effluents from the biological treatment plant was examined, using Fenton''s reagent as a pretreatment step prior to a next treatment of the effluents. Next tertiary treatment using fixed-film reactor resulted in marked reductions in COD and suspended solids. The continuous fixed-film process with Fenton oxidation pretreatment showed a 23% increase in the COD removal efficiency when compared to that without pretreatment of Fenton oxidation under the volumetric organic loading rate of 0.1 kg COD/m3/day. The Fenton oxidation treatment seemed to be a possible method for tertiary biological treatment to reduce the residual toxicity with the enhanced biodegradation of the effluents.

• 한국환경과학회지
• /
• 제4권5호
• /
• pp.501-508
• /
• 1995

Reuse of industrial effluents through the cooling systems in a petrochemical complex was described. The partial oxidation of the effluents from the biological treatment plant was examined, using Fenton's reagent as a pretreatment step prior to a next treatment of the effluents. Next tertiary treatment using fixed-film reactor resulted in marked reductions in COD and suspended solids. The continuous fixed-film process with Fenton oxidation pretreatment showed a 23% increase in the COD removal efficiency when compared to that without pretreatment of Fenton oxidation under the volumetric organic loading rate of 0.1 kg COD/m3/day. The Fenton oxidation treatment seemed to be a possible method for tertiary biological treatment to reduce the residual toxicity with the enhanced biodegradation of the effluents.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.916-921
• /
• 2006

Column mixer is one of the facility to mix fluids at petrochemical plants. The column vibration is caused by pumps for fluid inflow and mixing of inside fluids. This fluid induced vibration is mainly responsible for the reduction of column life. Measurements were performed three times for understanding the vibration characteristics of the column. First experimental results showed the need of stiffness reinforcement. After the reinforcement work, second measurement conformed the difference between two results. Modal analysis was also performed to investigate the resonance of the column vibration and the damage of the rib plate. To confirm the generation of the fluid instability in the column mixer fluid structure interaction analysis using ADINA/FSI was performed which showed the necessity of the modification of the rotary valve.

• 한국소음진동공학회논문집
• /
• 제17권3호
• /
• pp.213-219
• /
• 2007

Column mixer Is one of the facilities to mix fluids at petrochemical plants. The vibration of column mixer is usually caused by pumps for fluid inflow and mixing of inside fluids. This fluid induced nitration is mainly responsible for the reduction of column life. Measurements were performed for understanding the vibration characteristics of the column. First measurement results showed the need of stiffness reinforcement. After the reinforcement work, second measurement confirmed the difference between two results. Modal analysis was also performed to investigate the resonance of the column vibration and the damage of the rib plate. To confirm fluid induced vibration at the column mixer fluid structure interaction analysis using ADINA/FSI was performed, which showed the necessity of the modification of the rotary valve.

• 한국환경보건학회지
• /
• 제20권3호
• /
• pp.1-12
• /
• 1994

Wastewaters being treated and final effluents were collected from 3 wastewater treatment plants of petrochemical industries, from August 31 to October 4, 1993 in an interval of 10 days, and further analysed by GC/FID to investigate discharge situation and removal efficiency on polycyclic aromatic hydrocarbons. The results were as follows: 1. The PAHs 294.57 $\mu$g/l were discharged in primary treatment effluent of plant A to manufacture vinyl acetate resin and acryl, and removed 54.51% by aeration and totally 84.71%. 2. The PAHs of the highest concentration were discharged in primary treatment effluent of plant B to manufacture PS resin and ABS resin, but removed 91.65% by activated sludge process and 98.19% by activated carbon to discharge PAHs of the lowest concentration comparing to another treatment operations. 3. The PAHs 99.96 $\mu$g/l of the lowest concentration were discharged in wastewater of plant C to manufacture epoxy resin, and removed 80.48% by activated sludge process. 4. B treatment system including activated carbon showed up the best removal efficiency of PAHs. Activated carbon therefore, seems to be effective as tertiary treatment. 5. Correlation coefficient of components to total PAHs was generally low, and correlation coefficients of phenanthrene, pyrene and acenaphthylene to total PAHs were each 0.98, 0.97 and 0.80, respectively. Correlation coefficient of the sum of phenanthrene, pyrene and acenaphthylene to total PAHs was 0.99, so that the sum of phenanthrene, pyrene and acenaphthylene was available as index to estimated total PAHs. 6. Phenanthrene and Chrysene were very well treated biologically and acenaphthylene and fluoranthene were untreated biologically. 7. Considering EPA standards, it seems that the concentration of phenanthrene, pyrene, fluoranthene, and benzo(k)fluoranthene is high level.

• 대한기계학회논문집B
• /
• 제36권6호
• /
• pp.655-662
• /
• 2012

심각한 사고를 초래하는 석유화학 플랜트의 가스 누출 여부와 위치를 실시간으로 탐지하기 위하여 주변의 여러 기계소음 등으로부터 비정상적 누출 음향을 분리할 수 있는 기법을 제시하였다. LMS 알고리즘을 이용하여 FIR구조의 적응필터와 누출 탐지용 상호상관함수를 이용하여, LABVIEW를 통하여 누출예측프로그램을 개발하였고 직접 제작한 장비를 이용하여 잔향실에서 실험을 수행하였다. 홀 사이즈, 압력, 거리, 주파수를 인자로 하여 비정상적 누출소음에 대한 실험에서 얻어진 데이터를 분석한 결과, 암소음은 1kHz 대역 이하에서 주로 발생하고 누출에 의한 소음신호는 고주파 대역, 특히 16kHz의 대역에서 가장 잘 발생한다는 것을 알게 되었다. 이런 음향기법의 가능성을 확인하기 위해서 실제로 정유공장에서 소음을 측정한 결과, 펌프와 압축기에서의 소음신호가 각각 2kHz, 4.5kHz로 측정됨으로써 주변 환경 소음과 누출음이 구별 가능하고 누출 위치(거리)의 탐지가 가능함을 밝혔다.

• 기술사
• /
• 제33권5호
• /
• pp.28-32
• /
• 2000

It is about time for Korean plant engineering industry to evaluate what they have achieved in the past and to foresee how this industry will change in the future. Since the IMF infection in the late 1997, Korean engineering industry has become to realize how important it is to formulate plans and solutions in order to be successful in the EPC industry. Korean plant engineering has accomplished remarkable growth in terms of its sales volumes and sizes of petrochemical & refinery plants they have executed, but unfortunately they have not done a nice job of generating sufficient profits. Many Korean engineering companies have carried out million and billion dollars of "projects" where they unfortunately suffered deficits, and as a result, some companies actually went deteriorated and were merged, and acquired by bigger companies. Based on above philosophy, the ten(10) key factors are suggested regarding a proposal for role and mission of chemical engineering professional engineer in plant engineering industry in the 21\\\" century.

• 비파괴검사학회지
• /
• 제22권6호
• /
• pp.589-598
• /
• 2002

The safe operation of petrochemical plant requires screening of the pipework to ensure that there are no unacceptable levels of corrosion. Unfortunately, each plant has many thousands of metres of pipe, much of which is insulated or inaccessible. Conventional methods such as visual inspection and ultrasonic thickness gauging require access to each point of the pipe which is time consuming and very expensive to achieve. Extensional or torsional ultrasonic guided waves in the pipe wall provide an attractive solution to this problem because they can be excited at one location on the pipe and will propagate many metres along the pipe, returning echoes indicating the presence of corrosion or other pipe features. Guided Ultrasonics Ltd have now commercialised the technique and this paper describes the basis of the method, together with examples of practical test results and typical application areas.

• 대한안전경영과학회지
• /
• 제19권3호
• /
• pp.35-42
• /
• 2017

Process Hazard Analysis(PHA) have been performed for a risk management of process (petrochemical) industry for nearly 50 years. There are many PHA methods for application in the process industry, Hazop Study method has been recognized as a good method used typically in most of phase of process plant. And also there was inconvenient opinion that Hazop Study is too resource (man power, time etc.) consuming comparing its result performance (a quality of recommendations) for a good operating and existing plant. In this study, two types of PHA method - checklist and K-PSR - were performed respectively for a new para-xylene(PX)plant and 30 year old PX plant. Past history and experience of incident, operation, maintenance and so on are very important in PHA by those two methods. The higher effectiveness were realized in PHA by a checklist and K-PSR Method than prior Hazop study. And also some suggestions including PHA cycle determination, RBPS application, Follow-up plan of PHA result etc. were proposed about PHA improvement measures for a best risk management.

• Nuclear Engineering and Technology
• /
• 제38권4호
• /
• pp.383-390
• /
• 2006

Having its roots in medical applications, industrial gamma ray CT has opened up new roads far investigating and modeling industrial processes. Using a line of research related to industrial gamma ray CT, the authors set up a system of single source and detector gamma transmission tomography for wood timber and a packed bed phantom. The hardware of the CT system consists of two servo motors, a data logger, a computer, a radiation source and a radiation detector. One motor simultaneously moves the source and the detector for a parallel beam scanning, whereas the other motor rotates the scan table at a preset projection angle. The image is reconstructed from the measured projections by the filtered back projection method. The phantom was designed to simulate a cross section of a packed bed with a void. The radiation source was 20mCi of Cs-137 and the detector was a 1 inch $\times$ 1 inch NaI (TI) scintillator shielded by a lead collimator. The experimental gamma ray CT image has sufficient resolution to reveal air holes and the density distribution inside the phantom. The system could possibly be applied to a packed bed column or a pipe flow in a petrochemical plant.