• Title/Summary/Keyword: Petal

Search Result 260, Processing Time 0.03 seconds

The Secondary Chamber Pressure Characteristics of Sonic/Supersonic Ejector-Diffuser System (음속/초음속 이젝터 시스템의 2차정체실 압력특성)

  • Jung, S.J.;Lee, J.H.;Lee, K.H.;Choi, B.G.;Kim, H.D.
    • Proceedings of the KSME Conference
    • /
    • 2001.11b
    • /
    • pp.646-651
    • /
    • 2001
  • The present study is an experimental work of the sonic/supersonic air ejector-diffuser system. The pressure-time dependence in the secondary chamber of this ejector system is measured to investigate the steady operation of the ejector system. Six different primary nozzles of two sonic nozzles, two supersonic nozzles, petal nozzle, and lobed nozzle are employed to drive the ejector system at the conditions of different operating pressure ratios. Static pressures on the ejector-diffuser walls are to analyze the complicated flows occurring inside the system. The volume of the secondary chamber is changed to investigate the effect on the steady operation. the results obtained show that the volume of the secondary chamber does not affect the steady operation of the ejector-diffuser system but the time-dependent pressure in the secondary chamber is a strong function of the volume of the secondary chamber.

  • PDF

A Study on Structural Analysis of Reinforced Longitudinal Rib in Orthotropic Steel Deck Bridge (보강된 세로리브에 의한 강바닥판교의 응력변화 연구)

  • Kong, Byung-Seung;Kim, Min-Ho
    • Proceedings of the KSR Conference
    • /
    • 2007.11a
    • /
    • pp.468-475
    • /
    • 2007
  • The Steel deck a structural analysis in head plate form change the objective bridge which it sells it accomplished a detailed structural analysis from the research which it sees and Bulk-head plate it accomplished. The length rib where the fatigue crack which is considerable generally occurs, width rib connection department and the length rib side, the width rib side it compares principal stress in the object and it does to sleep. It applied the grudge element model which it describes consequently after words and a load and a boundary condition and it executed it compared a static test and principal stress. It grasped the stress conduct of the The Steel deck petal which it follows in hand weaving rib affix location and the affix location to sleep in order to analyze a same location Bulk-head the head and comparison considered. From the detailed section which is reinforced with the stress investigation result hand weaving rib of the location which is weak in structural analysis result fatigue crack of form star reinforcement details basic form and Bulk-head the form which is reinforced with the head plate compared to principal stress investigation hour it is judged at the section which separates most.

  • PDF

Morphological characteristics of fruit bodies and basidiospores of Wolfiporia extensa

  • Jo, Woo-Sik;Lee, Sung-Hak;Koo, Jinmo;Ryu, Songyi;Kang, Min-Gu;Lim, Soon-Young;Park, Seung-Chun
    • Journal of Mushroom
    • /
    • v.15 no.1
    • /
    • pp.54-56
    • /
    • 2017
  • Wolfiporia cocos is a well-known traditional medicine in China, Japan, Korea, and other Asian countries owing to its numerous therapeutic properties. With the aim to determine the morphology and genetic characteristics of W. cocosten strains of W. cocos were cultivated in vitro, and subsequently, rapid amplification of polymorphic DNA was performed. To the best of our knowledge, this is the first study to examine the morphology of fruit bodies of W. cocos in Korea. W. cocos were cultured on PDA agar at different temperatures (12, 16, 20, 24, and $28^{\circ}C$) under 12-hour light (600 Lux) / 12-hour dark photoperiod condition for 1 month. Appearance of fruit body was the highest at $28^{\circ}C$ condition in all the strains investigated. Honeycomb-like structure on sclerotia was observed in Andong 01, Andong 02, Andong 03, KFRI 1104, KFRI 1105, KFRI 1106, KFRI 1107, KFRI 1108, and ASI 13007 strains of. The KFRI 1103 strain formed cosmos petal-like structure on sclerotia. The average size of basidiospores was recorded as $7.55{\mu}m$ in height and $3.35{\mu}$ in width.

Purification and Characterization of Protein Phosphatase 2A from Petals of the Tulip Tulipa gesnerina

  • Azad, Md. Abul Kalam;Sawa, Yoshihiro;Ishikawa, Takahiro;Shibata, Hitoshi
    • BMB Reports
    • /
    • v.39 no.6
    • /
    • pp.671-676
    • /
    • 2006
  • The holoenzyme of protein phosphatase (PP) from tulip petals was purified by using hydrophobic interaction, anion exchange and microcystin affinity chromatography to analyze activity towards p-nitrophenyl phosphate (p-NPP). The catalytic subunit of PP was released from its endogenous regulatory subunits by ethanol precipitation and further purified. Both preparations were characterized by immunological and biochemical approaches to be PP2A. On SDS-PAGE, the final purified holoenzyme preparation showed three protein bands estimated at 38, 65, and 75 kDa while the free catalytic subunit preparation showed only the 38 kDa protein. In both preparations, the 38 kDa protein was identified immunologically as the catalytic subunit of PP2A by using a monoclonal antibody against the PP2A catalytic subunit. The final 623- and 748-fold purified holoenzyme and the free catalytic preparations, respectively, exhibited high sensitivity to inhibition by 1 nM okadaic acid when activity was measured with p-NPP. The holoenzyme displayed higher stimulation in the presence of ammonium sulfate than the free catalytic subunit did by protamine, thereby suggesting different enzymatic behaviors.

Pollination biology of Caesalpinia decapetala (Leguminosae) in Korea

  • Son, Hyun-Duk;Im, Hyoung-Tak
    • Journal of Species Research
    • /
    • v.4 no.2
    • /
    • pp.145-151
    • /
    • 2015
  • Morphological changes of flowers and insect visitors were observed to investigate pollinator of Caesalpinia decapetala. The flowers of C. decapetala are protandrous. Functionally, the flower is changed from male to female. As a male, pollen grain is released after anther dehisced while style is immature. After completed pollen grain release, the style starts to lengthen. It helps the stigma to easily touch the carpenter bee's thorax covered with pollen grain. At this time, flower functions as a female. The majority of taxa and individuals observed were Hymenoptera. The most frequent visitor was the Xylocopa appendiculata circumvolans, carpenter bee. Carpenter bees exhibited only typical pollinator behavior among flower visitors, with touching reproductive organs and seeking nectar at the same time. The pollination behavior is as follows. Soon after carpenter bees perceived guide mark, they foraged rightward and grasped style and stamens with legs and they inserted proboscis into standard petal to seek nectar. With this behavior, the pollen grains of the male flower transfer to the ventral thorax of the carpenter bee. As the carpenter bee moves to another female flower, the deposited pollen grains are delivered to the stigma.

Effect of ethyl acetate layer of Prunellae Spica on the induction of apoptosis in U937 cells (하고초 ethyl acetate분획의 U937세포에 대한 세포고사 유도효과)

  • Lee Eun Ok;Kim Sung Hoon
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.17 no.2
    • /
    • pp.293-296
    • /
    • 2003
  • Prunellae Spica is a flower petal of Prunella vulgaris var. lilacina used for treatment of lymphoma, breast cancer, hepatitis and pathological fluid related diseases in oriental medicine. We tried to evaluate the mechanism of Prunellae Spica in the treatment of cancer. The ethyl acetate layer of Prunellae Spica showed a good cytotoxicity on U937 cells with IC50 of 8 ug/ml. It induced apoptosis in U937 dose-dependently by cell cycle analysis following PI staining. We also confirmed it induced DNA fragmentation in U937 cells from the concentration of 10 ug/ml. From western blot assay we observed the ethyl acetate layer of Prunellae Spica downregulated procaspase-3 and cleaved PARP in a dose dependent manner, whereas it didn't affect bax and bcl-2. Taken together, these results indicate the ethyl acetate layer of Prunellae Spica can induce apoptosis in U937 cells suggesting it can be potently applied to cancer.

Detection and Molecular Characterization of a Stolbur Phytoplasma in Lilium Oriental Hybrids

  • Chung, Bong-Nam;Jeong, Myeong-Il
    • The Plant Pathology Journal
    • /
    • v.19 no.2
    • /
    • pp.106-110
    • /
    • 2003
  • Stolbur Phytoplasma was detected from Lilium Oriental hybrids showing flattened stem and flower clustering. The presence of phytoplasma was demonstrated using polymerase chain reaction(PCR) assays with phyto-plasma-universal(P1/P6)and stolbur phytoplasma-specific 16F1/R1-S primer pairs amplifying phytoplasma 16S rDNA regions. Nucleotide suquences of the phytoplasma 16S rDNA were determined. Nucleic acid extracted from lily amplified 1.5 kb DNA with a phytoplasma universal primer pair. In nested PCR, 1.1 kb PCR product was obtained using specific primer pair, indicating an isolate of stolbur phytoplasma. Nucleotide sequence of phytoplasma 16S rDNA reported in this study showed 99.5% and 99.1% identities with two known stolbur phytoplamas (16Sr XII-A). Also, it exhibited a sequence homology of 98.0% with phormium yellow leaf (16Sr XII-B), and 97.9% with Australian grapevine yellows (16Sr XII-B). Meanwhile, it showed 98.1% identity with strawberry green petal phytoplama, (16Sr1-C), and 94.7 % with American aster yellows (16Sr1-B). Homology percentage of the 16S rDNA nucleotide sequence suggests that this phytoplama could be classified into the stolbur phytoplasma, subgroup A (16Sr XII-A), as a type strain stolbur.

Development of Fashion Culture Goods Designs Motivated by Ume Flowers (매화꽃을 모티브로 한 패션 문화 상품 디자인 개발)

  • Kim, Sun-Young
    • The Research Journal of the Costume Culture
    • /
    • v.17 no.6
    • /
    • pp.972-980
    • /
    • 2009
  • This study was aimed to develop ume flower image into a competitive fashion culture product image by reinterpreting the image in modern terms, manufacturing patterns and applying them to various items. In terms of method, ume flower petal was used as a motive and developed into a pattern, using Adobe Illustrator 10, a computer design program. Based on the symbolic image and realist form of ume flower, three new basic motives of new figurative image were set using form omission, simplification, overlapping, repetition and graphic elements. Each motive developed transformed patterns through the change, transformation, combination of colors. The repetitive unit of each motive set expressed geometrical patterns and combination of flower patterns using pattern repetition and $45^{\circ}$ repetition technique in combination with the check arrangement using quadrangle, and set the direction of design that would fit for each item of fashion culture products. Also, consistency and practicality were sought in the goods planning composition of each item by applying motive pattern results to the fashion culture goods, such as neckties, scarves, T-shirts that can be consumed in everyday life. It seems that more creative culture goods including ume flowers will be developed by seeing our own cultural elements as well as flower patterns like ume flower with modern trends.

  • PDF

Plant Tissue Sensor for Determination of Cytidine (시티딘 정량을 위한 식물조직 센서)

  • Gwon Shik Ihn;Chin Kap Chung;Bong Weon Kim;Young Guk Jeon
    • Journal of the Korean Chemical Society
    • /
    • v.36 no.2
    • /
    • pp.218-222
    • /
    • 1992
  • Rose tissue containing cytidine deaminase converts cytidine to uridine and ammonia gas. Rose tissue sensor was constructed by immobilizing 50mg of a rose petal tissue on an NH3 gas sensor and the optimum condition of the sensor for the determination of cytidine was investigated. The tissue sensor showed a linear range of$7.0 {\times} 10^{-4}$$1.0{\times} 10^{-2}$M cytidine with a slope of 53 mV/decade in 0.2 M phosphate buffer, pH 8.4 at 37$^{\circ}C$. The detection limits were $3.0{\times}10^{-4}$ M and relative standard deviation was 3.4%. This sensor showed an excellent selectivity among various nucleosides and amino acids.

  • PDF

Study of a Tobacco MADS-Box Gene Triggering Flower Formation

  • Chung, Yong-Yoon;N, Gynheung-A
    • Proceedings of the Botanical Society of Korea Conference
    • /
    • 1996.07a
    • /
    • pp.10-18
    • /
    • 1996
  • Recently, we have reported a rice MADS-box gene, OsMADS1, as a molecular factor triggering flower formation; this has been well studied in a heterologous system (Chung et al., 1994). In order to study whether the OsMADS1 homolog exists in other plant species, the OsMADS1 cDNA was used as a probe to screen a tobacco cDNA library, and a potential homolog, NtMADS3, was isolated. Sequence analysis revealed that the gene shares 56.1% identity in whole amino acids with OsMADS1. Like OsMADS1, the NtMADS3 gene starts to express at a very early stage of flower development, and the expression continues up to flower maturation. In the tobacco flower, the gene is expressed in whorl 2,3 and 4, corresponding to the petal, stamen, and carpel, respectively. Upon ectopic expression in the homologous system, NtMADS3 caused a trasition from inflorescence shoot meristem into floral meristem, reducing flowering time dramatically. These phenotypes strongly suggest the NtMADS3 gene is the OsMADS1 homolog of tobacco. Hybrids between the OsMADS1 and the NtMADS3 plants were also generated. The hybrids flowered even earlier than these two transgenic plants. The detailed studies are discussed here.

  • PDF