• 한국의류산업학회지
• /
• 제3권5호
• /
• pp.466-472
• /
• 2001

To find a suitable condition in this process examined, we investigated the main control factors, such as, the NaOH concentrations, such as, the NaOH concentrations, the heat treating times, and the heating temperatures. The resulting mechanical properties of the fabrics also studied. The samples used were Nylon/Co-PET sea-island type composite microfiber (Co-PET content: 35%) non-woven fabric. The conclusions obtained were as follows. 1. For the complete extraction of Co-PET from the sample non-woven fabric in the dry hot air process, $160^{\circ}C$ of air temperature, 15 min. of treatment time, and around 30% of NaOH concentration were required. On the other hand, in the wet hot air process, $140^{\circ}C$ of air temperature, 3.5 min. of treatment time, and around 30% of NaOH concentration were required. 2. The mechanical properties of the continuous processed samples showed that the WT, B, and WC increased with increasing the weight reduction ratio. However, the G, decreased with increasing the weight loss ratio. Note that, particularly in B, it increased drastically when the weight deduction ratios exceeded 30%. 3. As increasing the wet hot air temperature from 130 to $140^{\circ}C$, B appeared to increase, however, WT, G, and WC appeared to decrease. 4. The best condition found in this continuous process to extract Co-PET is the wet hot air temperature of 140, NaOH concentration of 28% or above, and the treatment time 2-4 min.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.805-810
• /
• 2003

It is the real circumstance in the country that not only the data and special books but also people who have an expert knowledge are short of the field of the study about plastic wastes, so that to build the Database carrying out gathering info of that is the present question obviously. The business on recycling plastic, for some reason or other, is one of the best ways as called bright prospect industry to prevent environmental pollution and obtain economical outcome by using limited resources. Plastic wastes with construction industry especially using Polymer may have a good effect on the environment and human beings and have a fine view to produce functional and Eco-friendly concrete as well. In this study, Chemical resistance and Water Absorption test in Polymer concrete using bentonite as a shrinkage control agent was made an experiment by comparing with influence on concrete strength and used to offer some valuable data about Polymer concrete.

• 한국산업융합학회 논문집
• /
• 제12권4호
• /
• pp.203-208
• /
• 2009

Lacks of harmony of a person and machine according to productivity elevation pursuit is happened by enterprise common problem in Global competition age and productivity loss is caused being connected to worker's burden work. Burden work in PET bottle production Process which are arrangement, Packing, interior inspection is analyzed by Ergonomic analysis technique. REBA estimation point(10~11 points) means the high step of hazard on worker's burden. It is immediately required the improvement on the process. This thesis show you the improving methods like package, examination justice.

• 방사선산업학회지
• /
• 제10권1호
• /
• pp.37-41
• /
• 2016

The recent prevalence of PET examinations in Korea has led to an increase in the number of cyclotrons. The medical isotope $^{18}F$ produced in most cyclotron facilities currently operating in Korea is emitted into the environment during the production of [$^{18}F$]FDG, a cancerdiagnosis reagent. The amount of [$^{18}F$]FDG synthesized determines the radioactive concentration of $^{18}F$ in the exhaust. At some facilities, this amount temporarily exceeds the emission limit. In this study, we evaluated the $^{18}F$ radioactivity concentration in the exhaust from the cyclotron facility at Chosun University. The $^{18}F$ radioactivity concentration was measured using an air sampler and a HPGe semiconductor detector. The measurements showed that the radioactive concentration of $^{18}F$ in the exhaust at the cyclotron facility at Chosun University was the highest during [$^{18}F$]FDG synthesis but remained under the legal limit of $2,000Bq\;m^{-3}$.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.173-176
• /
• 2002

With the introduction of high-tech industries, these days textile products used as advanced materials of semiconductor, transport and medical fields. It was concerned with environmental problem in textile industry lately. So the problem is receiving careful study for high effectiveness and high efficiency of filter media made by nonwoven fabric to get rid of a pollutant. PET filter media produced from conventional methods can not precisely filtrate small particles, because conventional PET filter media has too large pore size. (omitted)

• 소성∙가공
• /
• 제13권1호
• /
• pp.65-71
• /
• 2004

Recent electronic equipment becomes smaller, more functional, and more complex. According to these trends, LTCC(low temperature co-fired ceramic) has been emerged as a promising technology in packaging industry. It consists of multi-layer ceramic sheet, and the circuit has 3D structure. In this technology via hole formation plays an important role because it provides an electric path for the packaging interconnection network. Therefore via hole qualify is very important for ensuring performance of LTCC product. Via holes are formed on the green sheet that consists of ceramic(before sintering) layer and PET(polyethylene terephthalate) one. In this paper we found the correlation between hole quality and process condition such as PET thickness and ceramic thickness. The shear behavior of double layer sheet by micro hole punching which is different from that of single layer one was also discussed.

• 미생물과산업
• /
• 제14권3호
• /
• pp.7-11
• /
• 1988

이글에서는 pet A, B, C에 대한 일차적인 아미노산 배열을 알았고 여기서 우리는 위의 정보들을 토대로하여 R. capsulatus에 대한 site-specific oligonucleotide-directed mutagenesis 등 여러 연구를 할 수가 있을 것이다.

• 한국의류학회지
• /
• 제41권6호
• /
• pp.1098-1108
• /
• 2017

This paper investigated stretchability with fabric mechanical properties of one-way and two-way stretch fabrics. For this purpose, 1-way and 2-way woven fabrics were prepared using 150d PET/spandex covered yarns with different thermal treatment according to 4 kinds of wet thermal machines subsequently, fabric mechanical properties were measured and compared with regular PET fabrics. In addition, the garment formability of stretch fabrics was predicted and compared to regular fabrics according to wet thermal treatment. The weft stretchability of 2-way stretch fabric was about 10% higher than the 1-way stretch fabric. The compressibility of the stretch fabrics was 1.5 times higher than regular fabrics. The compressibility of stretch fabrics treated with CPB and rope type wet thermal machine showed higher values than other types of wet thermal machines. The bending rigidity of 2-way stretch fabric was lower than 1-way stretch fabric. Shear rigidity of 2-way stretch fabric was higher than 1-way and regular fabrics. Garment formability of 2-way stretch fabric was higher than regular and one-way stretch fabrics. Garment formability of 2-way stretch fabrics treated with wet thermal conditions under low tension showed the highest values.

• 한국의학물리학회지:의학물리
• /
• 제31권3호
• /
• pp.81-98
• /
• 2020

This review aims to provide a brief, comprehensive overview of advanced technologies of nuclear medicine physics, with a focus on recent developments from both hardware and software perspectives. Developments in image acquisition/reconstruction, especially the time-of-flight and point spread function, have potential advantages in the image signal-to-noise ratio and spatial resolution. Modern detector materials and devices (including lutetium oxyorthosilicate, cadmium zinc tellurium, and silicon photomultiplier) as well as modern nuclear medicine imaging systems (including positron emission tomography [PET]/computerized tomography [CT], whole-body PET, PET/magnetic resonance [MR], and digital PET) enable not only high-quality digital image acquisition, but also subsequent image processing, including image reconstruction and post-reconstruction methods. Moreover, theranostics in nuclear medicine extend the usefulness of nuclear medicine physics far more than quantitative image-based diagnosis, playing a key role in personalized/precision medicine by raising the importance of internal radiation dosimetry in nuclear medicine. Now that deep-learning-based image processing can be incorporated in nuclear medicine image acquisition/processing, the aforementioned fields of nuclear medicine physics face the new era of Industry 4.0. Ongoing technological developments in nuclear medicine physics are leading to enhanced image quality and decreased radiation exposure as well as quantitative and personalized healthcare.

• 한국임상수의학회지
• /
• 제41권2호
• /
• pp.88-94
• /
• 2024

Pet rabbits are affected by the highly contagious ectoparasite Psoroptes (P.) ovis, which carries significant economic implications for the global rabbit industry. Accurate identification of the mite species remains essential to implement effective treatment and control strategies. Two approximately one-year-old female pet rabbits were admitted to the Veterinary Teaching Hospital of Chungbuk National University due to excessive scratching of the ears and the presence of waxy debris within the ear canals. Mites were isolated from the waxy debris extracted from the ear canals and subsequently identified as Psoroptes spp. through microscopic examination. Species confirmation was achieved through mitochondrial cytochrome c oxidase subunit 1 (cox1) gene analysis. The analysis revealed the mites to be P. ovis based on cox1 gene sequences. The deposited GenBank accession numbers for these sequences are OR985022 and OR985023. This represents the first report of mitochondrial cox1 gene sequences of P. ovis isolated from pet rabbits in South Korea.