• 생물환경조절학회지
• /
• 제15권1호
• /
• pp.69-77
• /
• 2006

The experiment was conducted to investigate the nutrition absorption pattern in the growth stage and develope the optimal nutrient solution hydroponically grown the cherry tomato 'Koko' in closed substrate culture system with the nutrient solution of National Horticultural Research Station in Japan into 1/2S, 1S, and 2S. When plant was grown in 1/2S, the growth and yield were high and the pH and EC in the root zone were stable. Suitable composition of nutrient solution for cherry tomato was $NO_3-N\;6.8,\;PO_4-P\;2.7,\;K 3.2,\;Ca\;3.6\;and\;Mg\;1.1\;me\;L^{-1}$ in the early growth stage, $NO_3-N\;7.3,\;PO_4-P\;2.2,\;K\;3.7,\;Ca\;3.6;and\;Mg\;1.1\;me\;L^{-1}$ in the late growth stage by calculating a rate of nutrient and water uptake. To estimate the suitability for the nutrient solution in a development of cherry tomato developed by Wongkwang university in Korea (WU), plant was grown in perlite substrate supplied with different solution and strengths(S) by research station for greenhouse vegetable and floriculture in the Netherlands (Proefstation voor tuinbouw onder glas th Mssldwijk; PTG) of 1/2S, 1S, and 2S, respectively. The growth was good at the PTG and WU 2S in the early stage and the PTG of 1S and WU of 1S and 2S in the late stage. The highest yield of cherry tomato obtained in the WU of 2S. pH and EC in root zone of WU of 2S were stable during the early and late growth stage. Therefore when cherry tomato plant was grown in WU of 2S of EC $1.6{\sim}2.0\;dS\;m^{-1}$in the nutrient solution, not only stable growth and yield but also fertilizer reduction can be obtained than that of PTG.

• 감성과학
• /
• 제14권1호
• /
• pp.117-126
• /
• 2011

이 연구는 감성의류용 형상기억 메모리직물의 제조 방법과 물성을 조사하기 위해 저온열처리와 정장열처리 가연법을 폴리프로필렌 POY와 SDY에 각각 적용하고 이들 사를 사용하여 PP형상기억메모리 직물을 air-jet직기에서 제조하였다. 물성비교를 위해서 PET와 PTT형상기억메모리 직물도 같이 제직하여 4가지 형상기억 메모리 직물시료를 만들고 이들의 여러 가지 물성을 측정 비료분석하여 다음과 같은 결론을 얻었다. PP형상기억 메모리 직물에 사용하기 위해 저온가연법과 정장열처리법에 의해 만든 PP가연사의 물성은 절단강 신도가제직성에 문제가 없는 값을 가졌으며 특히 열수축율이 습열은 1.5% 이하 건열은 3~5% 범위를 가짐으로써 PTT의 5~8%의 높은 열수축율에 비해 열적 안정성을 가졌다. PP형상기억 메모리 소재의 변형된 형태를 유지하는 소성적 성능 특성 평가법인 Toray 방추성 평가는 PP소재가 PTT와 같은 5급을 나타냄으로써 우수한 변형 유지특성을 보였다. 또한 PP형상기억 메모리소재의 보온성은 PTT소재보다 약 56% 향상된 결과를 보였으며 스프레이법에 의한 발수성은 PTT소재에 발수처리한 소재와 동일하게 5급의 우수한 발수성을 보였다. 그리고 PP형상기억 메모리소재의 형상기억 특성을 평가 할 목적으로 3D 이미지 방법과 카메라 측정결과 PTT소재와 비슷한 형상기억 특성을 보임을 확인 할 수 있었다.

• 한국산학기술학회논문지
• /
• 제20권6호
• /
• pp.272-277
• /
• 2019

본 논문에서는 옥외용 디스플레이의 눈부심 방지 강화유리 생산 방법을 제안하였다. 일반적으로 옥외용 디스플레이를 위한 커버글라스의 주요 사양은 내강도와 눈부심 방지이다. 내강도는 커버글라스를 고온로에서 열처리한 강화유리를 사용하여 그 요구 사양을 만족시키고 눈부심 방지를 위해서는 AG(Anti-Glare)필름을 강화 유리에 접착하여 주로 사용한다. 그러나 필름 형태의 눈부심 방지기술은 PET 필름자체의 내마모성이 3H정도로 취약하여 AG 성능이 지속적으로 유지되기 어렵다. 따라서 본 논문에서는 AG 필름이 가지는 내구성의 단점을 보완하고 기존 강화유리 생산 공정을 이용하는 눈부심 방지 기술을 제안하였다. 제안된 눈부심 방지 코팅은 ZBS ($ZnO-B_2O_3-SiO_2$) 분말을 유리 표면에 도포하고 강화공정을 수행하여 내구 강도와 눈부심 방지 성능을 높일 수 있도록 하였다. ZBS 분말을 유리 표면에 도포하기 위해서는 스크린 프린팅 공정을 이용하여 분말이 유리표면에 균일하게 도포되도록 하였다. 스크린 프린팅 시 고려되어야 하는 주요 변수는 분말을 희석하기 위한 오일의 농도와 메쉬 오프닝 사이즈이다. 이 두 변수의 설정에 따라 스크린 프린팅 공정에서 도포되는 ZBS 분말의 양이 조절되므로 이에 대한 상관관계를 실험을 통해 규명하였다. 제안된 제조 방법의 성능을 평가하기 위해 상업용 시장에서 널리 사용되는 haze, 표면 거칠기 및 투과도를 성능 지표로 선정하였고 눈부심 방지를 위해 일반적으로 사용되는 AG필름과 비교하여 그 성능을 검증하였다. 비교 결과 제안된 제조 방법에 의한 강화유리의 투과도는 AG필름의 89.5%보다 다소 감소한 83.1%이지만 막강도는 7H로 두배 이상 향상됨을 확인하였다.

• 한국잠사곤충학회지
• /
• 제53권1호
• /
• pp.38-43
• /
• 2015

양잠농가의 소득증대 및 산업기반 확대를 위한 새로운 형태의 고 부가가치 양잠산물 창출을 통하여 현재까지 섭취가 어려웠던 5령4일부터 숙잠기 누에의 식용화를 위한 가공기술을 개발하였다. 농민들도 쉽게 가공이 가능하도록 생누에를 열수에 침지하여 삶거나 수증기로 쪄서 익혀 본 결과 누에의 몸체와 더불어 누에체내에 들어 있는 견사선의 섭취가 가능함은 물론 맛도 좋은 것으로 나타났다. 상기 기술은 원천기술로서 향후 일반식품, 건강기능식품, 화장품, 애완동물용 사료 등으로의 광범위한 활용이 예상돼, 양잠농가 소득증대와 산업기반 확대에 큰 기여를 할 것으로 기대된다.

• 한국약용작물학회지
• /
• 제26권1호
• /
• pp.26-31
• /
• 2018

Background: Angelica gigas, A. sinensis, and A. acutiloba are commercially important in the herbal medicine market, and among them, A. gigas has the highest economic value and price. However, their similar morphological traits are often used for fraud. Despite their importance in herbal medicine, recognition of the differences between Angelica species is currently inadequate. Methods and Results: A multiplex polymerase chain reaction (PCR) method was developed for direct detection and identification of A. gigas, A. sinensis, and A. acutiloba. The gene for the distinction of species was targeted at ITS in the nucleus and trnC-petN gene in chloroplasts. The optimized multiplex PCR in the present study utilized each Angelica species-specific primer pairs. Each primer pair yielded products of 229 base pairs (bp) for A. gigas, 53 bp for A. sinensis, 170 bp for A. acutiloba. Additionally non-specific PCR products were not detected in similar species by species-specific primers. Conclusions: In the present study, a multiplex-PCR assay, successfully assessed the authenticity of Angelica species (A. gigas, A. sinensis, and A. acutiloba). and whole genome amplification (WGA) was performed after DNA extraction to identify, the species in the product. The detection method of raw materials developed in the present study could be applied to herbal medicine and health functional food management.

• 한국의류산업학회지
• /
• 제15권4호
• /
• pp.620-629
• /
• 2013

This study examines the rustling sound characteristics of electrospun nanofiber web laminates according to layer structures. This study assesses mechanical properties and frictional sounds (such as SPL); in addition, Zwicker's psychoacoustic parameters (such as Loudness (Z), Sharpness (Z), Roughness (Z), and Fluctuation strength (Z)) were calculated using the Sound Quality Program (ver.3.2, B&K, Denmark). The result determined how to control these characteristics and minimize rustling sounds. A total of 3 specimens' frictional sound (generated at 0.63 m/s) was recorded using a Simulator for Frictional Sound of Fabrics (Korea Patent No. 10-2008-0105524) and SPLs were analyzed with a Fast Fourier Transformation (FFT). The mechanical properties of fabrics were measured with a KES-FB system. The SPL value of the sound spectrum showed 6.84~58.47dB at 0~17,500Hz. The SPL value was 61.2dB for the 2-layer PU nanofiber web laminates layered on densely woven PET(C1) and was the highest at 65.1dB for the 3-layer PU nanofiber web laminates (C3). Based on SPSS 18.0, it was shown that there is a correlation between mechanical properties and psychoacoustic characteristics. Tensile properties (LT), weight (T), and bending properties (2HB) showed a high correlation with psychoacoustic characteristics. Tensile linearity (LT) with Loudness (Z) showed a negative correlation coefficient; however, weight (T) with Sharpness (Z) and Roughness (Z), and bending hysteresis (2HB) with Roughness (Z) indicated positive correlation coefficients, respectively.

• 한국의류학회지
• /
• 제41권1호
• /
• pp.17-27
• /
• 2017

This study evaluated the performance of bedding fabrics consisting of warp (150d/144f, polyester) and weft (polyester, Tencel and cotton MVS blended spun yarn) with blend ratio of weft. We measured electrostatic propensity, moisture properties, pilling properties and mechanical properties of the fabrics for this study. F-P fabric showed outstanding moisture properties and pilling properties. However, tensile properties and electrostatic propensity were relatively inferior to other characteristic values. Significant static electricity may make F-P fabric uncomfortable. F-P7C3 fabric showed outstanding moisture properties and pilling properties. Static electricity may make F-P7C3 fabric uncomfortable; in addition, F-P5C5 fabric showed outstanding moisture properties and pilling properties. Rough and stiff hand feel were expected to increase because tensile properties decreased and surface properties increased. F-C fabric showed outstanding pilling properties and electrostatic propensity. However, it showed inferior moisture control properties. F-P5T4C1 fabric showed outstanding moisture properties, pilling properties and electrostatic propensity. Several properties are outstanding; however, the hand feels are very rough and stiff from bending. The water evaporation and static electricity increased with increasing polyester content. As the content of cotton increased, tensile properties were improved. However, water evaporation and static electricity decreased. The addition of Tencel increased the thickness and compression energy so that it exhibited a soft characteristic upon compression and an excellent moisture control properties, but the surface became somewhat coarse.

• 한국의상디자인학회지
• /
• 제16권3호
• /
• pp.219-238
• /
• 2014

This study attempted to investigate present condition and product planning of global eco-fashion brands that harmonize fashion and sustainability. As research subjects, this study selected 97 oversea fashion brands mentioned in books related to eco-fashion, Black(2011), Brown(2010), Fuad-luke(2009). As for research methods, materials and ethical practices of these selected 97 brands through literature data and their internet site homepages. This study analyzed oversea eco-brands collected 26 British brands, 22 American brands, 36 European brands such as Germany, France, Italy, Sweden, Spain, Finland and so on, except Britain and 13 other regions including Japan, India, Canada, Mexico, and New zealand. In conclusion, the product planning characteristics of these oversea eco-fashion brands can be summarized as follows; community and fair trade, ecological and slow design, recycle, reuse, redesign, and new eco-models. Firstly, brands of 'community and fair trade' manufactured products through fair trade and local community's artisan by ethical practices with organic fabrics. Secondly, brands of 'ecological and slow design' pursued timeless design and multi-functional design as luxury eco-fashion styles. They used organic textiles, hemp, bamboo, soya, tencell, sea cell, and self-sustaining plants. Thirdly, brands of 'recycle, reuse, redesign' aimed for upcycling high-end fashion and used vintage clothes, textile scraps, PET, parachutes, tires, safety belts, advertising banner and so on. In addition, brands of 'new models as eco-fashion' suggested zero-waste cutting, recycling over-printing technology, new sustainable business model, and ethical practices in the supply chain of the fashion industry.

• 한국의류산업학회지
• /
• 제18권4호
• /
• pp.531-539
• /
• 2016

Charcoal dyed fabrics have been widely used in home textiles and functional clothing due to their anti-statics, antibacterial, deodorization, far infrared emitting and anion releasing. Soybean fiber were regenerated from soybean. Soybean fiber have biodegradable, microbiocidal, non-allergic, and anti-ageing properties. The purpose of this study is to investigate the dyeing characteristics of soybean fabric using charcoal as colorants. Soybean fabrics were dyed with charcoal solution according to concentration of charcoal, dyeing temperature, and dyeing time. To improve washing fastness and investigate mordanting condition, soybean fabric and dyed soybean fabric with charcoal were mordanted by mordanting agents such as $CH_3COOH$(acetic acid), NaCl(sodium chloride) and $AlK(SO_4)_2{\cdot}12H_2O$(Aluminium Potassium Sulfate). Dyeability and color characteristics of charcoal dyed soybean fabric were obtained by computer color matching and SEM morphology analysis. Particle size of charcoal and color fastness were also investigated. The results obtained were as follows; Mean average diameter of charcoal was $1.39{\mu}m$. The dyeability of soybean fabric using charcoal as colorants was increased gradually with increasing concentration of charcoal dyeing solution and saturated at about 8%(o.w.b.). The optimum dyeing temperature and dyeing time were $90{\sim}105^{\circ}C$ and 60~90 minutes respectively. The overall wash fastness at dyeing concentration 2~4%(o.w.b.) and 6~10%(o.w.b.) were 4 degree and 3-4 degree respectively. The fastness to washing according to mordanting method indicated good grade result as more than 4 degree in all conditions. On the other hand, the staining of adjacent fabrics, i.e. PET, Acryl, Wool, Acetate, Nylon and Cotton was found to be of grade 4 or 4-5 in all conditions.

• 한국의류산업학회지
• /
• 제9권4호
• /
• pp.401-408
• /
• 2007

The study aims to examine consumer awareness of green fashion products and demographic characteristics by subdividing environmentally conscious consumers of such products in the current domestic fashion market. It then compares the result with the characteristics of environmentally conscious consumers studied by 1999 in order to understand the trend of the consumer group in the fashion market and to promote the use of green fashion products. Marketing strategies for green fashion products suggested by the study are as follows: First, fashion firms are required to develop and publicize shops selling recycled or second-hand clothing that environmentally conscious consumers show constant interest. For instance, clothing patterns may be developed to enable consumers to make their kids' clothing easily at home, and various garments made from recycled materials may stimulate environmentally conscious consumers' desire to buy. Particularly, advanced technologies should be developed and publicized to manufacture garments that can excel existing ones made of normal materials in their features in order to satisfy consumers' interest in clothing made from recycled PET bottles. In addition, various natural dyes should be developed to decrease water pollution. Second, it seems imperative to develop clothing made of recycled knitted apparel that attracts consumers' interest more than ever, fashionable multi-purpose clothing, and environmentally friendly materials. As the use of natural fur or leather can cause the endangerment of wild animals and the destruction of the ecosystem, synthetic fur or leather may be used to develop sophisticated products with the same texture as real ones to attract environmentally conscious consumers' interest.