• The Korean Journal of Pesticide Science
• /
• v.8 no.2
• /
• pp.103-106
• /
• 2004

To confirm physico-chemical stability of formulated products, this study was conducted under different storage conditions; room temperature and accelerated temperature of $54^{\circ}C$. The tested pesticide formulations were dichlorvos 50% EC, acephate 50% WP, hymexazol 4% DP, thiram 80% WP and isoprothiolane 12% GR. The selected formulations were stored for 10 weeks and 5 years under the given temperature in maximum and contents of active ingredients were also analyzed by GLC or HPLC after each time of storage. The degradation rates of 5 active ingredients under the two conditions showed a similar trend except acephate. Acephate was rapidly decomposed at $54^{\circ}C$ but slowly decomposed at room temperature, and the degradation rate under the accelerated condition was 2.4 to 5-fold higher than that under the room temperature. Consequently, the stability test on active ingredients in pesticide formulations was able to recommend to be carried out under the accelerated condition except acephate. And the physical properties of all formulations tested under two storage conditions were good.

• The Korean Journal of Pesticide Science
• /
• v.12 no.1
• /
• pp.74-81
• /
• 2008

To elucidate the exposure of pesticide in agricultural environment and to investigate distribution of pesticide in paddy fields. This experiment was carried out to clarify pesticide distribution in paddy fields applied with different formulations and growing stages. Initial dissipation rate of applied butachlor EW and oxadiazon EC before rice planting were more than 90% within 3 days in paddy fields. The distribution of a.i. in the pesticide formulations tested depended upon the elapsed time at each growing stage of rice plant after application. Most of pesticides applied within 15 days after transplanting of rice seedlings, more than 95%, were located in the surface water and soil regardless of pesticides; butachlor, thiobencarb and molinate GR. The distribution of iprobenfos GR, tricyclazole WP and phenthoate EC, after application 2 hours in middle growing stage (46 days after rice planting) were shown as 16.1, 48.9 and 38.9% in surface water, 83.6, 15.4 and 10.7% in soil, and 0.3, 35.7 and 50.4% in rice plants of paddy fields, respectively. Also tricyclazole WP and phenthoate EC, after application 2 hours in the late rice growing stage (90 days after rice planting) were distributed to 7.8 and 9.8% in surface water, and 21.7 and 5.1% in soil, and 70.5 and 85.1% in rice plants of paddy fields, respectively.

• The Korean Journal of Pesticide Science
• /
• v.8 no.4
• /
• pp.319-324
• /
• 2004

Pesticide formulations for controlled release were pepared with hollow silica microspheres. The hollow microsphere, which was obtained through calcination for the core removed after silica coating, showed maximum impregnation of benfuracarb up to 2.7 times of its mass in comparison with those obtained through the other core removal method. The release test of the pesticide formulation, when used with ESO(Epoxidized Soybean Oil) as a binder, showed ideal release pattern with steady release rate from the day 10 to 30 retaining the benfuracarb concentration in the water around 1.65 ppm.

• The Korean Journal of Pesticide Science
• /
• v.9 no.4
• /
• pp.411-421
• /
• 2005

This study was carried out to establish rational methodologies for the use of pesticide formulations to be sprayed after water-dilution. Hardness and electric conductivity of six major river water and ground water sampled from 52 sites in major rice-growing areas across the country ranged from 5 to 324 ppm(av. 90 ppm) and from 0.038 to 1.078 dS/m(av. 0.265 dS/m), respectively, which are acceptable for diluent water of pesticides. The pH changes in pesticide spray solutions with time after preparation mainly depended on the pH of the water used for pesticide dilution. The surface tensions of pesticide spray solutions reduced slightly with time after preparation, irrespective of kinds of pesticide formulations. Suspensibility of WPs became worse with an increase in the hardness and salt concentrations of diluent water, even though the degree was negligible. Emulsion stability of ECs became worse with an increase in hardness and salt concentrations of diluent water. Degradation rates of the active ingredients of pesticide spray solutions 3 days after preparation were less than 5%, regardless of mixing or non-mixing of two or more pesticides. Consequently, the spray solutions of most pesticides were usable until two to three days after preparation unless physical properties deteriorated. The tank-mixing order of EC and WP formulations did not make any differences in all the physical properties of pesticide spray solutions. However, the proper order for the tank-mixing of compatible pesticides was WP, WG, SC, EC, and SL, because the order is easy to prepare the pesticide spray solutions. The efficacy of pesticide spray solutions on the respective target pathogens and insect pests of rice plants three days after preparation was recorded over 95% of that of 0 day, which was almost the same as that of the solutions applied punctually after preparation.

• The Korean Journal of Pesticide Science
• /
• v.6 no.1
• /
• pp.1-8
• /
• 2002

Recent progress of several kinds of compounds which have been synthesized or isolated from natural fungi for screening or conducting test as agricultural fungicides as well as some formulations for wood stain and decay control have been reviewed in this paper in China. Comments were pointed for Chinas further research and development of fungicides as well as pesticides.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 1998.06a
• /
• pp.88-119
• /
• 1998

• The Korean Journal of Pesticide Science
• /
• v.12 no.2
• /
• pp.118-126
• /
• 2008

In order to find the best compositions of the dimethomorph formulation containing fatty alcohol ethoxylate surfactants as an activator adjuvant and recommend the good management way of the formulations to allow an intended uptake rate, factors affecting foliar uptake of active ingredients into cucumber were investigated and compared each other. Among tested, the most important factors were air temperature in which plants were located after spraying of aqueous formulations containing activator adjuvant, and deposit of wax on the leaf surface of cucumber. Dimethomorph uptake was found to be increased by sunlight. When aqueous formulations had long-polyethoxylated fatty alcohol surfactants, the relative humidity of the room in which the plants were located after spraying with the formulations did not severely influence the foliar uptake. Maintaining a mild temperature and avoiding too strong sunlight after spraying with dimethomorph formulations were found to be resonable management strategies.

• The Korean Journal of Pesticide Science
• /
• v.9 no.4
• /
• pp.311-315
• /
• 2005

The simultaneous or consecutive product analysis is needed for quality control because the various items are produced in pesticide manufacturer. This study was conducted to establish a multi-pesticide analysis making possible to analyze several active ingredients with one injection of mixed active ingredients under same instrument-condition in the cause of quality control with accuracy and speed. The test was conducted with 3 pesticides, iprobenfos 17%GR, isoprothiolane 12%GR, tebufenozide 20%SC and performed by GLC and HPLC. With the GLC method, 2 active ingredients of iprobenfos and isoprothiolane were analyzed but tebufenozide was not detective simultaneously. With the HPLC method, all of the active ingredients in those three pesticides were simultaneously analyzed in this study.

• Applied Biological Chemistry
• /
• v.33 no.4
• /
• pp.315-318
• /
• 1990

After technical pesticides and dispersants were dissolved in a volatile organic solvent, the wettable powders(WP's) were formulated by adsorbing the pesticide-dispersant solution to finely powdered porous synthetic silica without milling process. The median sizes of 11 WP'S were smaller than $8{\mu}m$, 9 of which had more than 80% suspensibility after 2 hours. It was possible In formulate 50% WP for liquid of fly technical pesticides. The pesticidal efficacies of WP's tested were comparable In commercial formulations regardless of suspensibilities of WP's.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.3
• /
• pp.239-246
• /
• 2010

Aphids are one of the major pests in agricultural crops. A number of synthetic pesticides have been used for control of aphids in agriculture, but increasing public concerns over their adverse effects on the environment have required more environmentally-friendly methods for pest management. In this study, we examined plant oil formulations for the control of green peach aphid (Myzus persicae). Oil formulations were prepared by hydrolyzing the plant oils in ethanolic KOH solution and diluted at the rate of 1:500 for aphid control. The oil formulations showed aphid mortalities ranging from 24.44 to 43.33% in vitro. Significantly increased aphid mortalities were observed by the treatment of oil formulations combined with low-dosed imidacloprid. No significant difference in the aphid mortality was observed between the oil formulations. Mass spectrometry analyses of aphids treated with the low dosedimidacloprid plus the plant oil formulations detected similar concentrations of imidacloprid between the treatments. In field trial bioassays against aphids, significantly decreased aphid population were observed in the pepper plants treated with soybean oil formulation combined with the low-dosed imidacloprid, while aphid population dramatically increased in the pepper plants treated with the low-dosed imidacloprid alone. These results suggested that the plant oil formulations can be used as an environmentally-friendly method for enhancing the insecticidal effectiveness, which may play a role in reducing the use of synthetic pesticide in agriculture.