• Membrane Journal
• /
• v.24 no.4
• /
• pp.311-316
• /
• 2014

The polyacrylonitrile (PAN) hollow fiber composite membranes were prepared and their pervaporation performance was tested to concentrate the acetic acid aqueous solution. The coating of the composite membranes were confirmed by SEM images and the coating thickness was averagely $3.85{\mu}m$. As the crosslinking agent and the crosslinking temperature increase, the permeability decreases while the separation factor increases. Typically, the permeability $250g/m^2{\cdot}hr$ and the separation factor 13 were obtained for glutaraldehyde 13 wt% as the crosslinking agent and crosslinking temperature $140^{\circ}C$. And for the use of another crosslinking agent, poly (acrylic acid) 9 wt% and crosslinking temperature $140^{\circ}C$, the permeability $330g/m^2{\cdot}hr$ and separation factor 9 were obtained.

• Membrane Journal
• /
• v.17 no.1
• /
• pp.61-66
• /
• 2007

A zeolite membrane shows better thermal, mechanical and chemical stabilities than a polymer membrane. Water was separated from iso-propyl alcohol (IPA)/water mixtures by pervaporation using the NaY zeolite membrane synthesized in the laboratory. The effects of a mole fraction of IPA in the feed solution and an operating temperature were studied on the permeation flux behavior and the separation factor of water with respect to IPA. As a mole fraction of IPA increased, the water flux as well as the separation factor decreased. As the experimental temperature increased, the water permeation flux increased while the separation factor decreased. For IPA/water binary mixtures, the water flukes through the NaY zeolite membrane were observed to be $1.9{\times}10^2{\sim}3.5{\times}10^3\;g/m^2{\cdot}hr$ and the separation factors were found to be $7.0{\times}10^2{\sim}2.0{\times}10^4$.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.04a
• /
• pp.65-66
• /
• 1996

투과증발법은 상부에 액체공급액이 반투과막과 접촉하고 있고 하부에 진공에 가까운 낮은 압력을 걸어줌으로써 투과물이 수증기로 제거되는 막공정의 하나이다. 막을 통한 분리는 혼합물의 각 성분이 막내에서 다른 용해도와 확산도를 가지고 있기 때문에 발생한다. 이 공정의 지배적인 전달 메카니즘은 용해-확산 모델을 기초로 하고 있기 때문에 전형적으로 투과증발막은 대개 미세다공성 지지체에 얇은 선택성을 가진 재료를 입힌 복합막을 사용한다. 본 연구의 목적은 선택성을 가진 상부층막이 키토산인 복합막에서 지지체 구조의 영향을 살펴보고 키토산 복합막에 대한 물-에탄올 분리에 대해 최적의 모델을 찾는 것이다. 투과증발막소재로서의 키토산은 친수성기를 가지고 있으므로 물과 알코올의 분리에서 물만을 선택적으로 흡수하여 투과시키는 우수한 성능을 지니고 있으나 더욱 효과적인 막성능을 발휘하기 위해서는 지지체의 역할 및 막성능에 영향을 끼치는 여러 가지 인자들을 고려해서 막을 설계하는 것이 필요하다. 여기서는 상부층의 막두께, 지지체의 특성, 피드 농도 등을 변화시켜 가장 적당한 모델을 예측하였다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.10a
• /
• pp.127-128
• /
• 1997

1. 서론 : 투과증발막에 의한 수용액으로부터 유기물을 선태적으로 투과하는 공정은 용제회수, 오염감소, 유기물농축 및 처리 등의 목적으로 사용되어진다. 1989년에 이르러 상업적으로 응용이 되기 시작하였으며, 여러가지 막재질이 개발되고 있으나 현재 적용되고 있는 막은 Silicone rubber가 주를 이루고 있다. 이중 PDMS 막은 유기물질의 선택적 분리에 있어서 가장 우수한 막재질로 보고되고 있다. 투과증발을 이용하여 휘발성 유기물질을 분리함에 있어서 그 분리능은 막재질의 선정뿐만 아니라 막구조의 결정이 중요한 변수로 지적되며, 이 구조에 따라 투과성능의 다양한 변화를 가져올 수 있다. 본 연구는 PDMS의 막구조를 달리하면서 제막하여, VOC중 MEK(Methyl Ethyl Keton)과 toluene을 실험물질로 정하여 PDMS막의 투과성능을 관찰해보았다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.11a
• /
• pp.219-222
• /
• 2003

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.124-127
• /
• 2004

Many studies have examined the use of liquid membranes for various processes such as separations of isomers, gas, organic mixtures, and removal of specific ions. It has been reported that liquid membranes show high selectivity. However, it is difficult to apply the liquid membranes to practical industrial processes because of the low stability of the liquid membranes.(omitted)

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.04a
• /
• pp.89-92
• /
• 1998

1. Introduction : Among many azeotropic compounds, pyridine which forms an azeotropic mixture with three moles of water boiling at 92-93$\circ$C is very useful synthetic intermediate in laboratory and industry. With conventional separation method, the dehydration of pyridine aqueous solution is difficult and requires strong drying chemicals. To overcome these difficulties, several researchers have investigated on the separation of pyridine from aqueous solution through polymer membranes. Kujawski reported several ion-exchang membranes containing carboxylic and sulfonic fuctional group for dehydration of aqueous pyridine solution [1]. We have applied the idea of activation of water tranport through ion-dipole interactions between polymer membrane and aclueous feed. Our previous studies reported on the in-situ complex membrane to separate water from aqueous pyridine solution based on simple acid'-base theory [2, 3]. Water transport was enhanced through in-situ complex formation between the , acid moiety in the membrane and the incoming pyridine moiety in the feed.

• Membrane Journal
• /
• v.23 no.4
• /
• pp.283-289
• /
• 2013

Poly(vinyl alcohol) (PVA) coating solution containing glutaraldehyde (GA) and maleic anhydride (MA) as crosslinking agents was coated onto hydrolyzed poly acrylonitrile (PAN) hollow fiber membranes. The permselectivities of the resulting composite membranes prepared varying the reaction temperature and the concentration of the crosslinking agents were tested for 90 wt% ethanol aqueous mixtures by the pervaporation technique at $60^{\circ}C$. In general, the flux decreased while the selectivity increased for the increases of the reaction temperature and the crosslinking concentration. In case of GA as a crosslinking, the flux $165g/m^2hr$ and the separation factor 81 were obtained at GA 11 wt% and the reaction temperature $120^{\circ}C$. And for the case of MA, the flux $174g/m^2hr$ and the separation factor 73 were obtained at MA 11 wt% and the reaction temperature $120^{\circ}C$.

• Membrane Journal
• /
• v.10 no.1
• /
• pp.30-38
• /
• 2000

Prediction method of permeation flux and sorption characteristics in pervaporation through a polydimethylsiloxane(PDMS) memrane was suggested. The amount of sorption and permeation flux of chloroform, toluene, methanol and n-butanol were calculated with this method and compared with this method and compared with experimetal data. The calculated values of permeation flux and the amount of sorption of good solvents, that is, toluene and chloroform were well agreed with the experimental data. The lower the density of PDMS membrane is, the more permeation flux and sorption quantity were increased. However, the experimental data of poor solvents, that is, methanol and n-butanol were no so well agreed with the calculated values. It is shown that the prediction method suggested in this study may be used without experimetnal for the prediction of permeation flux and sorption quantity of the good solvent on PDMS membrane.

• Membrane Journal
• /
• v.6 no.4
• /
• pp.242-249
• /
• 1996

To improve pervaporation performance of water/ethanol mixtures, chitosan/poly(vinyl alcohol) blended and phosphorylated chitosan composite membranes were prepared. Chitosan/poly(vinyl alcohol) blends were prepared with various blend ratios and then crosslinked with glutaraldehyde by two methods. With increasing crosslinking agent content and crosslinking times separation factor increased and permeate flux decreased. Separation factor of the membrane which contains glutaraldehyde as a crosslinking agent was higher than that of the membrane surface crosslinked. Phosphorylated chitosan was prepared with various reaction times and composite membrane was prepared. As reaction times increased, the separation factor increased with high affinity for water.