• 한국의류학회지
• /
• 제37권7호
• /
• pp.952-961
• /
• 2013

This study optimizes a suitable dyeing method for polylactic acid (PLA) fabrics using disperse dyes. For this, disperse red 60 (DR 60), disperse blue 56 (DB 56), and disperse yellow 54 (DY 54) were used and dyed on PLA fabrics dependent of dyeing temperature and time. The fastness of PLA fabrics dyed with three disperse dyes were evaluated; in addition, dye exhaustion, color strength (K/S value), and colorimetric properties of PLA fabrics were compared with PET fabrics. The experiments indicated optimum dyeability of PLA fabrics with disperse dyes. The dyeing temperature was $90^{\circ}C$ for every dye and the dyeing time were 20 min, 60 min, and 40 min for DR 60, DB 56, DY 54, respectively. PLA fabrics had good color fastness to washing, dry cleaning fastness, hot pressing fastness, rub fastness, and perspiration fastness by DR 60, DB 56, and DY 54. The dye exhaustion of PLA fabrics were lower than PET fabrics; however, K/S values were higher than PET fabrics.

• 한국의류학회지
• /
• 제41권1호
• /
• pp.28-42
• /
• 2017

Moisture transfer characteristics of high emotional garments are important to evaluate wear comfort. Wicking and drying measurement methods are also critical for perspiration absorption and quick dry fabric made of high functional fibers. In this study, the wicking and drying properties of high emotional fabrics made from hybrid composite yarns using CoolMax, Tencel, Bamboo staple fibers and PP. PET CoolMax filaments were also measured and analyzed according to various measuring methods. The wicking property of hybrid composite yarn fabrics by Bireck method was mostly influenced by the structure of hybrid yarns than the absorption rate of constituent fibers; however, both the hygroscopicity of fibers and the composite yarn structure affected the wicking property of the fabrics in the drop method. Concerning drying properties, the KSK 0815B method measuring distilled moisture weight was more relevant to explain the drying characteristics of hybrid yarn fabrics than the KSK 0815A method measuring the time to drying. This study revealed that the drying properties of hybrid yarn fabrics were influenced by the hygroscopicity of constituent fibers, wicking properties of constituent yarns and structure of composite yarns.

• 한국염색가공학회지
• /
• 제30권2호
• /
• pp.150-157
• /
• 2018

The purpose of this study is to investigate the proper dyeing condition, color fastness and functionality of silk fabrics dyed with Zizania latifolia Turcz. FT-IR spectrum analysis suggests that colorants of Zizania latifolia Turcz. are tannins. The dyeing of the silk fabrics using Zizania latifolia Turcz. was very good even without pretreatment or mordanting treatment. Optimal dyeing conditions of silk fabrics were colorant concentration of 200%(o.w.f.), dyeing temperature of $100^{\circ}C$, dyeing time of 60 minutes and dyebath pH of 5.5. Color fastness of dyed silk fabrics to washing, rubbing, perspiration and light was 4~4-5, 5, 4~4-5(acidic), 4-5(alkaline) and 2 respectively. UV protection rate and deodorization rate of silk fabrics dyed with Zizania latifolia Turcz. were improved. Reduction rate(Staphyloccus aureus) of silk fabrics was excellent at 98.3%. As a result, it was confirmed that the Zizania latifolia Turcz. could be used as an eco-friendly functional natural dye.

• 한국염색가공학회지
• /
• 제11권5호
• /
• pp.30-37
• /
• 1999

The extracts drawn out from Artemisia princeps by water was concentrated. Using this concentrate the silk and the cotton fabrics were dyed, and they were measured with the K/S value, surface color and mordant quantity in order to evaluate the dyeability and the antimicrobial activity. The results are as follows; 1. The K/S value of the silk fabric was much higher than that of the cotton fabric. And the color yield of the dyed silk fabric was most efficient for the premordanting method. 2. The surface colors on the dyed fabric depended heavily upon mordants used or mordanting methods. For all cases, the value of the dyed fabric was generally dark. For the Cr-mordant among various mordants, the chroma produced clear and the color difference was distinct when using the Fe-mordant. 3. On the other hand the amount of absorbed mordant in the silk fabric was larger than that of the cotton fabric. And the Cu-mordant was most efficient. 4. The color fastness was significantly improved when mordants were added. Cr-mordant improved best in all of the dry cleaning, wet cleaning and perspiration fastness. Iron and abrasion fastness showed over 4-5 grade regardless of any mordant. And light fastness was best in Cu-mordant. 5. The Cu-mordant showed the greatest antimicrobial activity in both of mordant treat silk and cotton fabrics.

• 패션비즈니스
• /
• 제21권1호
• /
• pp.166-176
• /
• 2017

This study is fundamental research on how to be able to scientifically quantify and reproduce a natural dyeing procedure. By dyeing silk fabrics, the establishment of a reproducible dyeing method was sought. Juglans mandshurica has been known as one of the most widely used black vegetable dyes. Repetition conditions and combination dyeing were performed with Juglans mandshurica cortex, gallnut, clove, and Eclipta prostrata L. extracts to express a deep black color. Juglans mandshurica cortex, gallnut, clove, and Eclipta prostrata L. extracts were suitable for black coloration and showed a darker black color when combined with iron mordant. Specifically, Juglans mandshurica cortex and clove can be used for deep black coloring. Color fastness when washed or dry cleaned was found to be strong with a grade of 4-5 and fastness to light was rated at a 3-4. The grade of color change when exposed to rubbing and perspiration was good at a 4-5. In regards to functional property aspects, it showed excellent results with a 99% deodorization rate at 120 minutes of dyeing time, 97.1% UV protection rate, and 85.9% and 62.3% bacterial reduction against Staphylococcus aureus and Streptococcus pneumoniae, respectively. Therefore, it is considered that the extract from the Juglans mandshurica cortex is of great value as an eco-friendly, natural dyestuff.

• 패션비즈니스
• /
• 제22권4호
• /
• pp.106-117
• /
• 2018

The present study was conducted to investigate dyeing properties and functionality of silk fabrics dyed with extracts from buckwheat skin. Comparative results of color strength(K/S) values of dyed silk fabrics were studied to quantify the effects of dye concentrations, dyeing temperatures, dyeing time and the pH; the effect of mordants; and color changes. And also evaluated the fastness, antimicrobial property, ultraviolet protection properties of the dyed and mordanted silk fabrics. The color strength(K/S) values of silk generally increased depending on the increasing dye concentration, dyeing temperature, and dyeing time. And the highest color strength values were obtained at a dye concentration of 100%(v/v), a dyeing temperature of $90^{\circ}C$, a dyeing of time 80 minutes, and a dyebath of pH 2. The color fastness to light of dyed and mordanted silk fabrics were found to be good, and the drycleaning and rubbing fastness were excellent. The fade of washing fastness was not good, however, the stain of washing fastness and perspiration fastness showed relatively good grade. The Al, Cu, Fe mordanted silk fabrics(except Fe for Klebsiella pneumoniae) showed 99.9% reduction rate. The ultraviolet protection properties of the mordanted fabrics were generally improved. Moreover, the Cu and Fe mordnared fabrics showed very exceptional ultraviolet protection factors.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1826-1829
• /
• 2005

Recent advancement in wireless communications and electronics has enabled the development of low power sensor network. Wireless sensor network are often used in remote monitoring control applications, health care, security and environmental monitoring. Wireless sensor networks are an emerging technology consisting of small, low-power, and low-cost devices that integrate limited computation, sensing, and radio communication capabilities. Sensor network platform for health care has been designed, fabricated and tested. This system consists of an embedded micro-controller, Radio Frequency (RF) transceiver, power management, I/O expansion, and serial communication (RS-232). The hardware platform uses Atmel ATmega128L 8-bit ultra low power RISC processor with 128KB flash memory as the program memory and 4KB SRAM as the data memory. The radio transceiver (Chipcon CC1000) operates in the ISM band at 433MHz or 916MHz with a maximum data rate of 76.8kbps. Also, the indoor radio range is approximately 20-30m. When many sensors have to communicate with the controller, standard communication interfaces such as Serial Peripheral Interface (SPI) or Integrated Circuit ($I^{2}C$) allow sharing a single communication bus. With its low power, the smallest and low cost design, the wireless sensor network system and wireless sensing electronics to collect health-related information of human vitality and main physiological parameters (ECG, Temperature, Perspiration, Blood Pressure and some more vitality parameters, etc.)

• 대한한의진단학회지
• /
• 제17권2호
• /
• pp.90-111
• /
• 2013

Objectives Migratory pathogenic factor(六淫) occupies an important position in the etiology of Korean Medicine. This paper shows how Dampness, one of Migratory pathogenic factor(六淫), is explained in Donguibogam(東醫寶鑑). And, based on this, we will figure out how to make a judgement of Dampness through diagnosis. Method 1. Collect parts of Dampness mentioned in Donguibogam(東醫寶鑑). 2. From the collection, extract contents about mechanism and symptom of Dampness, which is considered necessary for diagnosis. 3. Put all the extraction together, suggest the diagnosis element which can be criteria of judgement of Dampness through diagnosis. Result & Conclusions The occurrence of Dampness come from a wet climate and environment externally, and overeating of greasy food and digestive disorder internally. There are many different kinds of symptoms throughout the body cause of poor circulation. Dampness is classed as Cold-dampness, Damp-heat, and Dampness-phlegm depending on characteristic symptoms, and mainly shows musculoskeletal disease and digestive troubles. Typical symptoms are pitting edema, distention and fullness, moderate and thready pulse, volume of perspiration increase, loose feces, urine volume decrease, pain of joint and muscle, restriction of movement, etc.

• 대한가정학회지
• /
• 제42권7호
• /
• pp.63-72
• /
• 2004

This study discussed the dyeing of wool and cotton fabrics with Betel Palm Tree White woolen fabrics and cotton fabrics purchased from HATH (Korea Apparel Testing ＆ Research Institute) were used as experimental fabrics. Using dyeing powder extracted from dyeing material, various temperatures, dyeing times, and pH were used in the dyeing process. Al, Cr, Fe, Cu, and Sn were used as mordant and the absorption was compared with different mordanting methods. The optimum condition for pre-mordanting dyeing was dye concentration of 25% (o.w.f) and mordant concentration of 0.5$^{\circ}$∼1%. Woolen fabric showed an increase of absorption and the maximum absorption was achieved at weak acidity. According to the mordanting methods, woolen fabrics and cotton fabrics were treated with various mordanting agents, a mordant rate of 1:100, at 60$^{\circ}C$, for 30 minutes and dyed with a dyeing material concentration of 25% (o.w.f), at a rate of 1:100, at 60$^{\circ}C$ for 60 minutes. The best dyeing effect w3s achieved at the temperature of 60$^{\circ}C$ for cotton and 80$^{\circ}C$ for wool fabrics. The light fastness of cotton and wool fabrics was low and particularly the fastness to perspiration was decreased with Fe mordanting. I concluded that pre-mordanting method was better than post-mordanting method for cotton and woolen fabrics.

• 한국농촌생활과학회지
• /
• 제10권2호
• /
• pp.28-36
• /
• 1999

The purpose of this study was to examine the best condition for dyeing silk in green color used kudzu-vine leaves which were available everywhere in our country except winter. Dyeing experiments were done under various dyeing conditions according to extracting method of dyebath from kudsu-vine leaves, pH of dyebath, dyeing time, concentration of dyebath and mordants which were treated after dyeing. Color difference ($\Delta$E) and Munsell's HV/C and color fastness to drycleaning, washing, perspiration and light were measured. The main results were as follows : 1. The color difference of dyed silk increased in dyebath B & C which were extracted in alkali water comparing with dyebath A which was extracted in distilled water. In dyebath B & C, the color difference was the highest in case of dyebath pH 5.0. 2. The colors of fabrics dyed in dyebath A were mainly yellow and the colors in dyebath B & C were yellow green. 3. The color differences of dyed silk increased according to dyeing time and concentration of dyebath. 4. The color were changed with the treatment of mordants. The most strong green color could get in Cu mordant treatment in dyebath C, pH 5.0, and concentration 4. 5. The peak of reflectance within the visible light of the fabric dyed in the most strong green color could be seen in $\lambda$500-520nm. 6. On the whole, the colorfastness of experimental fabrics dyed in dyebath B, C and Cu mordant treatment was good except the colorfastness to the light.