• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.457-467
• /
• 2018

This paper presents performance comparison of several high-resolution frequency estimation algorithms for pure real tone signal. Algorithms are DFT (Discrete Fourier Transform - for reference purpose), Jacobsen, Candan, reassignment and Cedron. Each algorithm is evaluated under various experimental conditions, e.g., different SNR (Signal to Noise Ratio), window function and window length and performance is compared in the perspective of bias, MSE (Mean Square-Error) and variance. Experimental results indicate that Cedron algorithms works well in the most cases. For actual usage in the engineering problem, each algorithm needs additional analysis and modification.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1700-1705
• /
• 2003

In this paper, the automatic steering system for unmanned vehicle was developed. The vision system is used for the lane detection system. This paper defines two modes for detecting lanes on a road. First is searching mode and the other is recognition mode. We use inverse perspective transform and a linear approximation filter for accurate lane detections. The PD control theory is used for the design of the controller to compare with $H_{\infty}$ control theory. The $H_{\infty}$ control theory is used for the design of the controller to reduce the disturbance. The performance of the PD controller and $H_{\infty}$ controller is compared in simulations and tests. The PD controller is easy to tune in the test site. The $H_{\infty}$ controller is robust for the disturbances in the test results.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.7
• /
• pp.277-284
• /
• 2014

The detection method of curves for the lanes which is powerful for the variation by utilizing the lane variation vector and cardinal spline on the inverse perspective transformation screen images which do not required the camera parameters are suggested in this paper. This method detects the lane area by setting the expected lane area in the s frame and next s+1 frame where the inverse perspective transformation and entire process of the lane filter are adapted, and expects the points of lane location in the next frames with the lane variation vector calculation from the detected lane areas. The scan area is set from the nextly expected lane position and new lane positions are detected within these areas, and the lane variation vectors are renewed with the detected lane position and the lanes are detected with application of cardinal spline for the control points inside the lane areas. The suggested method is a powerful method for curved lane detection, but it was adopted to the linear lanes too. It showed an excellent lane detection speed of about 20ms in processing a frame.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.7
• /
• pp.267-274
• /
• 2018

This paper describes a head pose estimation method using PTZ(Pan-Tilt-Zoom) camera. When the external parameters of a camera is changed by rotation and translation, the estimated face pose for the same head also varies. In this paper, we propose a new method to estimate the head pose independently on varying the parameters of PTZ camera. The proposed method consists of 3 steps: face detection, feature extraction, and pose estimation. For each step, we respectively use MCT(Modified Census Transform) feature, the facial regression tree method, and the POSIT(Pose from Orthography and Scaling with ITeration) algorithm. The existing POSIT algorithm does not consider the rotation of a camera, but this paper improves the POSIT based on perspective projection in order to estimate the head pose robustly even when the external parameters of a camera are changed. Through experiments, we confirmed that RMSE(Root Mean Square Error) of the proposed method improve $0.6^{\circ}$ less then the conventional method.

• Korean Journal of Remote Sensing
• /
• v.19 no.6
• /
• pp.431-445
• /
• 2003

In this paper, we experimentally investigated the precision of 3D positioning using 4S-Van images in photograrmmetric perspective. The 3D calibration target was built over building facade outside and was captured separately by two CCD cameras installed in 4S-Van. After then, we determined the interior orientation parameter for each CCD camera through self-calibration technique. With the interior orientation parameter computed, the bundle adjustment was performed to obtain the exterior orientation parameters simultaneously for two CCD cameras using calibration target image and object coordinates. The reverse lens distortion coefficients were computed and acquired by least squares method so as to introduce lens distortion into epipolar line. It was shown that the reverse lens distortion coefficients could transform image coordinates into lens distorted image coordinates within about 0.5 pixel. The proposed semi-automatic matching scheme incorporated with lens distorted epipolar line was implemented with scene images captured by 4S-Van in moving. The experimental results showed that the precision of 3D positioning from 4S-Van images in photograrmmetric perspective is within 2cm in the range of 20m from the camera.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.3
• /
• pp.247-262
• /
• 2022

In domestic tunnels, it is mandatory to install CCTVs in tunnels longer than 200 m which are also recommended by installation of a CCTV-based automatic accident detection system. In general, the CCTVs in the tunnel are installed at a low height as well as near by the moving vehicles due to the spatial limitation of tunnel structure, so a severe perspective effect takes place in the distance of installed CCTV and moving vehicles. Because of this effect, conventional CCTV-based accident detection systems in tunnel are known in general to be very hard to achieve the performance in detection of unexpected accidents such as stop or reversely moving vehicles, person on the road and fires, especially far from 100 m. Therefore, in this study, the region of interest is set up and a new concept of inverse perspective transformation technique is introduced. Since moving vehicles in the transformed image is enlarged proportionally to the distance from CCTV, it is possible to achieve consistency in object detection and identification of actual speed of moving vehicles in distance. To show this aspect, two datasets in the same conditions are composed with the original and the transformed images of CCTV in tunnel, respectively. A comparison of variation of appearance speed and size of moving vehicles in distance are made. Then, the performances of the object detection in distance are compared with respect to the both trained deep-learning models. As a result, the model case with the transformed images are able to achieve consistent performance in object and accident detections in distance even by 200 m.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.281-284
• /
• 2002

Error resilience for image coding is an important component of multimedia communication system. Error resilience schemes address loss recovery from the compression perspective. Multiple description coding (MDC) is one of the error resilience techniques promising for robust video transmission. It is the way to achieve tradeoff description such as scalar quantization, correlating transform and the quantized frame expansion. In this paper, we consider Multiple Description Scalar Quantization (MDSQ) to wavelet domain. Conventional MDSQ schemes considered description with equal weights in each sub-bands. But, we can see that the each sub-bands is unequal contribution to whole image quality. Therefore, we experiment the multiple design MDSQ table to make probability of zero index high, which gives high efficiency in arithmetic symbol coder. We also compare our proposed method with the conventional methods and show improved performance in terms of redundancy-rate-distortion.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1915_1916
• /
• 2009

스테레오 X-선 영상시스템 개발을 위하여 수치적 프로젝션을 획득하는 방법론 및 수치적 팬텀 영상을 고안하고 시험하였다. 오픈소스인 TAKE21을 사용하여 수치적 팬텀을 설계하고 그로부터 프로젝션 이미지를 획득하였다. 스테레오 영상을 위한 평행 원근 투영(Parallel-Perspective) 기하구조에 대한 스테레오 프로젝션 영상을 얻기 위해서 계측기의 계와 선원의 위치에 대해 동차 좌표계(Homogeneous coordinate)에서의 선형변환(Linear Transform)을 적용되는 방식을 이용하였다. 이러한 시뮬레이션은 스테레오 X-선 검색 장치의 설계 및 알고리즘 개발에 유용하게 사용될 수 있을 것이다.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.415-420
• /
• 1989

This thesis deals with range finding using one camera and laser pointer. Range finding will be used further recognition of the image, that is, range image which allows further segmentation of the scene. In the first step, camera modeling is performed by camera calibration which executes least square fit. Least square fit uses the method of sigular value decomposition. And perspective transform of camera is obtained. Lastly range finding is performed by triangulation principle. The result of this algorithm are displayed.

• Korean Medical Education Review
• /
• v.22 no.3
• /
• pp.153-162
• /
• 2020

The aim of modern medicine is to prolong life by fighting death. Doctors have traditionally believed that this was an ethical good deed. The negative connotation surrounding death has led to the avoidance of terminally ill patients. But in a modern society where death is medicalized, doctors have to see dying patients every day and are in a state of guilt from implementing meaningless life-sustaining treatments. Therefore, medical schools should allow medical students to embrace a new perspective through death education. Yonsei University Medical College has implemented death education since 2017 as an optional class for first and second year medical students. Students watch videos related to death once a week for 6 weeks and submit their reflections by e-mail. The professor reads the students' reflections and gives them weekly feedback. Through this coursework, students realize that death is not a medical event, but rather a part of life and completion. The ultimate purpose of death education is to transform blind life-absolutist identity into narrative identity.