• 제목/요약/키워드: Personal gain

검색결과 149건 처리시간 0.026초

무선 개인 영역망 환경에서 빔 스위칭과 시공간부호를 적용한 OFDM 전송방식의 성능 (Performance of OFDM using Beam-switching and Space-Time coding in Wireless Personal Area Network)

  • 윤석현
    • 대한전자공학회논문지TC
    • /
    • 제47권7호
    • /
    • pp.85-92
    • /
    • 2010
  • 본 연구에서는 무선 개인 영역망 (WPAN, wireless personal area network) 환경에서 OFDM기반 전송을 위한 빔 스위칭 기술과 시공간부호 기술을 고려한다. 특히, 빔포밍 방법과 시공간부호를 이용한 공간 다이버시티 방식 그리고 이 둘을 결합한 빔포밍 기반 시공간 부호화 방식에 대한 성능 평가를 수행한다. 빔 포밍의 경우 RF단에서 빔포밍을 수행하는 Front-end 방식만을 고려하며 따라서 미리 정해진 코드북을 이용하는 블록 빔스위칭 방식에 대한 성능평가를 수행한다. 시공간부호를 이용한 공간 다이버시티 방식의 경우, 여러 개의 안테나 중 SNR 이득이 가장 큰 2개의 안테나를 선택하여 Alamauti 방식을 적용하는 안테나 선택 시공간부호 방식을 가정하여 성능평가를 수행한다. 빔포밍 기반 시공간부호화 방식에 대해서는 전체 안테나를 인접한 두 개의 안테나 그룹으로 나누고 각각의 안테나 그룹에 대해 독립적인 빔스위칭을 적용하는 방식을 고려하며 송수신단의 대칭성을 고려하여 수신단에서도 2개의 수신 안테나 그룹만을 사용하는 시스템만을 고려한다. 이 세가지 방식에 대한 성능 평가결과 시공간 부호화를 추가로 적용할 때 추가적인 이득이 얻어질 수 있음을 알 수 있었다.

개인용 정보 단말장치를 위한 내장형 멀티스레딩 프로세서 구조 (Embedded Multithreading Processor Architecture for Personal Information Devices)

  • 정하영;정원영;이용석
    • 대한전자공학회논문지SD
    • /
    • 제47권9호
    • /
    • pp.7-13
    • /
    • 2010
  • 본 논문은 스마트폰, 타블렛 PC와 같은 개인용 정보 단말장치 응용에 적합한 프로세서 구조를 제안한다. 고성능 내장형 프로세서 개발은 아키텍쳐의 변화가 필요하고, 오버헤드가 크기 때문에, 업계에서는 높은 동작 주파수의 고성능 내장형 프로세서의 개발에 전념하고 있다. 고성능 프로세서 구조 중 비순차 슈퍼스칼라(out-of-order superscalar)는 하드웨어 복잡도가 과도하게 증가하며, 그에 비해 성능 향상이 적으므로 내장형 응용에 적합하지 않다. 따라서 하드웨어 복잡도가 낮은 고성능 내장형 프로세서 구조의 개발이 필요하다. 본 논문에서는 스칼라, 슈퍼스칼라, 멀티프로세서 방식에 비하여 복잡도가 낮은 새로운 SMT(Simultaneous Multi-Threading) 구조를 제안한다. 최근의 개인용 정보단말기는 많은 작업을 동시에 수행하기 때문에, SMT나 CMP는 이에 적합한 구조라 할 수 있다. 또한, 시뮬레이션 결과 SMT는 여러 프로세서 구조 중 가장 효율이 높은 프로세서로 보인다.

메시지 프레이밍과 증거 유형에 따른 중국 청소년 비만예방 메시지 효과 (The Effects of Message Framing and Evidence Type on Obesity Prevention for Chinese Adolescents)

  • 서소상;최유진
    • 한국콘텐츠학회논문지
    • /
    • 제18권3호
    • /
    • pp.626-635
    • /
    • 2018
  • 점차 심각해지고 있는 중국 청소년 비만예방 메시지 개발을 위해 본 연구는 비만 관여도과 메시지 프레이밍 유형 간의 상호작용, 비만 관여도와 증거 유형 간의 상호작용이 비만예방 태도와 행동의도에 미치는 영향을 살펴보았다. 메시지 프레이밍 유형은 이익 프레이밍과 손실 프레이밍으로 구분하였고, 증거는 개인 경험을 바탕으로 하는 내러티브와 객관적 수치에 기반한 통계적 형식으로 구분하였다. 중국 청소년 368명이 참여한 연구 분석 결과 수용자의 관여도, 메시지 프레이밍과 증거 유형이 비만예방 태도와 행동의도에 유의미한 영향을 보였다. 관여도가 높은 집단은 손실 프레임과 통계적 증거에 노출되었을 때 더 긍정적 비만예방 태도와 행동의도를 보이는 것으로 나타났다. 관여도가 낮은 집단은 이익 프레임과 내러티브에 노출되었을 때 더 긍정적 비만예방 태도와 행동의도를 보이는 것으로 나타났다. 따라서 관여도가 높은 집단을 설득하기 위해서는 통계에 바탕을 둔 손실프레이밍을, 관여도가 낮은 집단을 설득하기 위해서는 내러티브에 바탕을 둔 이익프레이밍을 제시할 것을 제안한다.

분산 원장 기반의 개인 주도적 건강 데이터 관리 프레임워크 설계 (Design of a Personal-Led Health Data Management Framework Based on Distributed Ledger)

  • 문준호;김동수
    • 한국전자거래학회지
    • /
    • 제24권3호
    • /
    • pp.73-86
    • /
    • 2019
  • 4차 산업 혁명이 시작되고 헬스케어 분야 역시 신기술을 접목한 새로운 비즈니스 모델을 찾기 위해 노력하고 있다. 그중 블록체인 기술은 의료 분야에서 큰 관심을 갖는 기술 중 하나이다. 여러 가지 문제들로 인하여 시장성 확보에 어려움을 겪고 있는 개인 건강 기록 시스템 분야 역시 블록체인 기술의 접목을 통해 시스템의 발전과 시장성 확보를 위한 노력을 기울이고 있다. 하지만 블록체인은 개인 건강 기록 시스템의 문제를 해결하기에는 한계가 있다. 이에 본 연구에서는 블록체인의 상위 개념인 분산 원장 기술을 기반으로 정보 주체가 개인 건강 데이터에 대한 온전한 소유권을 확보할 수 있는 개인 주도적 건강 데이터 관리 프레임워크를 설계하였다. 프레임워크의 설계를 위해 컨소시엄 블록체인 중 하나인 R3 Corda의 구조를 참고하였으며, 개인 사용자의 모바일 장치에 노드를 운용할 수 있도록 기존 블록체인과 다른 네트워크 구조를 설계하였다. 이를 통해 정보주체가 직접 자신의 정보를 저장 및 관리하고 허가된 네트워크 구성원들에게 정보를 공유할 수 있도록 하였다. 제안된 시스템을 통해 의료 산업의 정보 활용도를 향상시키고 국민 건강 증진과 의료 기술의 발전을 이룰 수 있을 것이다.

심미치료의 진단을 부탁해 (Diagnosis of Esthetic treament)

  • 백장현
    • 대한치과의사협회지
    • /
    • 제54권1호
    • /
    • pp.8-15
    • /
    • 2016
  • To improve esthetics and gain beautiful smile, the maxillary anterior dentition is crucial. Through alteration of height, arrangement or color of the maxillary incisor, we can rehabilitate the esthetic smile. The perception of dental esthetics is highly subjective. Personal perceptions or judgement of dental esthetics is highly related with each individual's experience and social and cultural environment. However, there have been many efforts to establish the criteria for generally accepted esthetic norm, in order to increase the predictability of restorative treatment. For maxillary anterior restoration, not only a single tooth, but also the compositions around tooth such as facial form, lips and gum and their relationships have to be considered to create harmonious smile. It can be determined as esthetic restorations when in consonance with facial form and structures that frame the restorations. In this review article, several guidelines that are generally accepted and useful to assess the esthetics and communicate with patients and technicians will be discussed.

  • PDF

Broadband Microstrip Patch Antenna

  • 이호준;이재영;김종규
    • 한국마이크로전자및패키징학회:학술대회논문집
    • /
    • 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
    • /
    • pp.230-233
    • /
    • 2003
  • In this paper, the wideband microstrip patch antennas for the Personal communications Service $(PCS\;:\;1750\~1870\;MHz)$ and International Mobile Telecommunications-2000 $(IMT-2000\;:\;1920\~2170\;MHz)$ dual band are studied. Experimental and simulation results on the dual band antenna are presented. Simulation results are in good agreement with measurements. The experimental and simulation results confirm the wideband characteristics of the antenna. The studied antenna satisfied the wideband characteristics that are required characteristics for above 420 MHz impedance bandwidth for the PCS and IMT-2000 dual band antenna. In this paper, through the designing of a dual band antenna, we have presented the availability for PCS & IMT-2000 base station antenna. An impedance bandwidth of $31\%(VSWR<1.5,\;615\;MHz)$ and a maximum gain of 7dBi can be achieved. The radiation pattern is stable across the passband.

  • PDF

PCS 대역용 안테나 내장형 단말기의 성능 분석 (Performance Analysis of Mobile Station with Built-in Antenna for PCS Band)

  • 공성신;오종대;양운근
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
    • /
    • pp.560-564
    • /
    • 2003
  • In this paper, we carried out performance analysis of mobile station with built-in antenna for PCS(Personal Communication System) band. The radiation patterns for antenna and mobile phone were simulated by using 3D simulation program, HFSS(High Frequency Structure Simulator) and SEMCAD(Simulation Platform for Electromagnetic Compatibility Antenna Design Dosimetry). We observed radiation pattern variation according to installation of LED(Light Emitting Diode) circuit and ground pattern. The radiation pattern of prototype mobile phone was measured, and the radio sensitivity was measured by using Agilent E5515C and chamber. The measured maximum antenna gain at 1.87GHz was 0.21dBi. The measured radio sensitivity of prototype mobile phone shows proper performances comparable to other models with external antennas.

  • PDF

사례를 통한 프로젝트 단계별 보안 방안에 대한 연구 (A Study on The Step-by-step Security Measures of Project through Cases)

  • 신성윤;장대현;김형진
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2012년도 추계학술대회
    • /
    • pp.44-46
    • /
    • 2012
  • 유수의 기업체가 사이버공격을 받아 개인정보를 유출당하는 피해 사례가 속출하고 있다. 또한 금전이득의 획득이나 사회적 혼란 유발 등을 목적으로 계획된 해킹사례가 지속적으로 증가하고 있다. 본 논문에서는 IT서비스 기업들이 수행하는 프로젝트 단계별 주요 보안 활동 사례를 파악한다. 이를 통하여 실제 프로젝트 단계별로 적용할 수 있는 보안 방안을 제시하고자 한다.

  • PDF

단결정 실리콘 성장기를 위한 퍼지 제어기 구성 및 적용 (Fuzzy Controller Design and Its Application to MCZ Crystal Grower)

  • 김광대;한형석
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2000년도 제15차 학술회의논문집
    • /
    • pp.71-71
    • /
    • 2000
  • In this paper, the fuzzy system is applied to MCZ Crystal Grower using at industrial field. The existing controller, which is PID controller, has a fixed gain and as a result of it it can not have an adaptive control function against the error or disturbance. Hence, the machine operator should always check the process status and when the error is occurred, the quality and the productivity may be decreased by each personal capability. In order to remove this drawback, a fuzzy control system which is known to be adaptive and flexible is applied to the machine. After applying the fuzzy system, and compared with the existing system, the diameter deviation and the defects were decreased. we proved the possibility of application fuzzy system to single silicon crystal grower.

  • PDF

극점배치기법을 이용한 트롤리 및 스프레더의 위치제어 (Position Control of the Trolley and Spreader Using Pole-placement Method)

  • 이태영;김면희;최원식
    • 한국산업융합학회 논문집
    • /
    • 제2권2호
    • /
    • pp.165-172
    • /
    • 1999
  • Crane operation for transporting heavy loads causes swinging motion at the loads. This sway causes the suspension ropes to leave their grooves and leads to possibility of serious damages. Generally crane is operated by expert's knowledge. Therefore, a satisfactory control method to supress object sway during transport is indispensible. The dynamic behavior of the crane shows nonlinear characteristics. when the length of the rope is changed the crane is time varying system and the design of anti-sway controller is very difficult. In this paper, the nonlinear dynamic model for the industrial overhead crane is derived. and the feedback gain matrix based on the pole-placement method is proposed to supress the swing motion and control the position of the crane. The performance of the controller for the crane model is simulated on the personal computer.

  • PDF