• Geomechanics and Engineering
• /
• 제21권3호
• /
• pp.279-288
• /
• 2020

The permeation grouting is a commonly used technique to improve the engineering geology condition of the soft ground. It is of great significance to predict the permeation range of the grout so as to ensure the effects of grouting. This paper conducts a theoretical analysis of jet-grouting effects in ground improvement and rotary grouting pile installation by utilizing deformation-permeation coupled poroelastic solutions based on Biot's theory and Laplace-Fourier integral transform technique. The exponential function and the intermittent trigonometric function are chosen to represent time-dependent grouting pressure usually encountered in ground improvement and rotary grouting pile installation process, respectively. The results, including the radial displacement, the hoop stress, the excess pore fluid pressure, the radial discharge, and the permeation radius of grout, are presented for different grouting time, radial positions and grouting lengths. Parametric study is conducted to explore the effects of variation of the exponent in the exponential grouting pressure-time relationship on grouting-induced responses. It is expected that the proposed solutions can be used to estimate the permeation range of grouting in ground improvement and rotary grouting pile installation.

• 자연, 터널 그리고 지하공간
• /
• 제1권1호
• /
• pp.67-80
• /
• 1999

The Grout-reinforcement technique which is widely used during the excavation of a shallow or an endangered tunnel can be classified into a couple of groups according to the properties and injection methods of the grout. The reinforcement design will, therefore, take a different approach based on the grouting method under consideration. However, the injection procedure is mainly performed by the experience of the foreman rather than engineering judgement , specifically the permeation grouting through the rock joints and its reinforcement effect Is not fully under-stood during the design stage, In this study, the anisotropic material properties of the grout-reinforced rock masses are derived from the concept of composite materials and the effect of intact rock, vertical grouting and permeation grouting is, therefore, fully accounted for. Through the parametric studies on the characteristics of rock joints, intact rock and grouting materials, various case studies have been considered. The results, illustrated via the design charts, can be directly used during the reinforcement design.

• 한국지반환경공학회 논문집
• /
• 제3권4호
• /
• pp.37-49
• /
• 2002

본 연구에서는 고강도 고내구성 및 환경에 대한 안정성이 높은 주입재료를 주입재 형태별로 즉 현탁액형, 용액형 주입재에 배합설계를 실시하여 주입압, 지반조건에 따른 주입효과와 환경적 유해성을 분석 검토하고자 한다. 주입재 특성 및 주입효과에 대한 연구결과, 현탁액형 주입재에서는 초미립자시멘트가 보통시멘트에 비하여 상당히 높은 침투성 및 고결율을 나타냄을 알 수 있었고 용액형 주입재에 사용된 인산과 탄산수소나트륨의 경우 초미립자시멘트와 유사한 경향을 나타내었다. 주입된 고결체의 압축강도 시험결과, 현탁액형 주입재의 초미립자시멘트가 상당한 고강도를 나타났으나 용액형 주입재의 경우 현탁액형 주입재에 비하여 매우 낮은 강도를 나타내었다. 또한 주입재가 가지고 있는 환경적 유해성 여부를 평가하기 위해 대상시료를 주입재의 원재료 및 주입재의 고결시편의 양생일수에 따라 중금속 용출시험을 실시한 결과, 선정한 약액조합 및 고결체의 중금속 함량은 규제기준을 만족하였다.

• Geomechanics and Engineering
• /
• 제17권4호
• /
• pp.367-374
• /
• 2019

This study concluded the results of a research on the features of cement based permeation grout, based on some important grout parameters, such as the rheological properties (yield stress and viscosity), coefficient of permeability to grout ($k_G$) and the inject ability of cement grout (N and $N_c$ assessment), which govern the performance of cement based permeation grouting in porous media. Due to the limited knowledge of these important grout parameters and other influencing factors (filtration pressure, rate and time of injection and the grout volume) used in the field work, the application of cement based permeation grouting is still largely a trial and error process in the current practice, especially in the local construction industry. It is seen possible to use simple formulas in order to select the injection parameters and to evaluate their inter-relationship, as well as to optimize injection spacing and times with respect to injection source dimensions and in-situ permeability. The validity of spherical and cylindrical flow model was not verified by any past research works covered in the literature review. Therefore, a theoretical investigation including grout flow models and significant grout parameters for the design of permeation grouting was conducted in this study. This two grout flow models were applied for three grout mixes prepared for w/c=0.75, w/c=1.00 and w/c=1.25 in this study. The relations between injection times, radius, pump pressure and flow rate for both flow models were investigated and the results were presented. Furthermore, in order to investigate these two flow model, some rheological properties of the grout mixes, particle size distribution of the cement used in this study and some geotechnical properties of the sand used in this work were defined and presented.

• 한국지반공학회논문집
• /
• 제19권2호
• /
• pp.159-170
• /
• 2003

본 연구에서는 재료분야에서 최근의 기술동향인 고강도.고침투성.고내구성 및 환경에 대한 안정성이 높은 주입재료의 배합설계를 실시하여 주입목적, 지반조건에 따른 주입효과와 환경적 영향성을 분석.검토함으로써 현장적용시 주입설계의 기초자료로 제안하고자 한다. 주입재의 물리, 역학.화학적 특성 및 입자형상을 파악하고 작업성과 침투범위 조정에 필수적인 겔타임을 조정하였다. 또한 실내모형시험을 통하여 고결성, 침투성 및 내구성 평가를 수행하였다. 환경적 영향평가를 위해 본 연구에서 사용된 재료는 현장에서 일반적으로 사용되는 보통포틀랜드시멘트, 고로슬래그시멘트와 초미립자시멘트를 사용하였다. 시멘트계 그라우트재에서의 6가 크롬의 용출특성을 판단하기 위해 원재료의 6가크롬 함유량 시험과 pH변화에 따른 6가크롬의 용출변화량 시험 그리고 그라우트가 적용되는 주변환경에 따른 특성파악을 위해 호모겔을 제작하여 양생수를 각각 초순수, 침출수로 하여, 양생수에 따른 그라우트 호모겔의 일축압축강도 및 6가크롬 용출량의 변화를 시험하였다.

• 한국터널지하공간학회 논문집
• /
• 제20권2호
• /
• pp.485-500
• /
• 2018

사질토에서의 시멘트 침투 그라우팅 거동 특성을 실내 챔버 모형실험 결과를 토대로 흙의 입도분포에 따라 시멘트 침투 그라우팅 불가 영역, 시멘트 침투 그라우팅 가능 영역, 그리고 급결제 혼합 필요 영역으로 구분하였다. 시멘트 침투 그라우팅 가능 영역에서는 대표 간극 반지름의 개념을 제안하였고 사질토에서의 평균 간극 반지름에 대한 대표 간극 반지름의 비를 실내실험 결과와 폐색 이론식을 비교함으로 구할 수 있었으며, 입도분포에 따라 1.07에서 1.35 정도가 됨을 알 수 있었다. 또한 실험 조건 별로 실험결과와 이론식을 비교하여, lumped parameter (${\theta}$)를 흙의 대표 간극 반지름과 시멘트 그라우트재의 물시멘트비로부터 구할 수 있는 관계식을 제안하였다. 급결제 혼합 필요 영역에서는 겔화 시간의 조절을 통한 주입 깊이의 제한과정을 실험적으로 검증하였고 그 실험값이 시간에 따른 점도 변화 함수를 적용한 이론값과 일치하는 것을 확인하였다.

• Geomechanics and Engineering
• /
• 제16권2호
• /
• pp.159-168
• /
• 2018

In this study, a real-time grouting management system based on the clogging theory was established to manage injection procedure in real time. This system is capable of estimating hydraulic permeability with the passage of time as the grout permeates through the ground, and therefore, capable of estimating real time injection distance and flow rate. By adopting the Controlled Injection Pressure (CoIP) model, it was feasible to predict the grout permeation status with the elapse of time by consecutively updating the hydraulic gradient and flow rate estimated from a clogging-induced alteration of pore volume. Moreover, a method to estimate the volume of the fractured gap according to the reduction in injection pressure was proposed. The validity of the proposed system was successfully established by comparing the estimated values with the measured field data.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.697-703
• /
• 2008

Excessive water leakage phenomenon happens through damage of nation core zone of about 17,000 storage of water facilities or collapse of dam is worried, is being damaged or enforce dilapidated fill dam core zone's repair reinforcement. Example that use grouting method of construction considering construction and economic performance etc. recently by repair reinforcement way about defect of dam is increased. Permeation grouting method repair & reinforcement of fill dam countermeasure is preferred in nation. Do that is economical to decide these repair reinforcement effect and grouting effect estimation method that do not give damage to dam is effective. Therefore, observing electricity resistivity Survey change of dam since grouting reinforcement using Electric resistivity Survey inquiry of seismic survey method in this research, Wished to verify grouting effect whether is possible as Electric resistivity Survey, and study whether integrity of dam through repair reinforcement defined.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.267-278
• /
• 2010

To improve the grout penetration characteristics, vibration method was adopted in this study. The grout material perturbed by cyclic vibration is injected into the ground. By applying the vibrating flow system, cement particles will become less adhesive and the clogging tendency will be decreased. A series of pilot-scale chamber tests were performed to verify the enhancement of the groutability by applying the vibratory grout injection; assessment on change of the lumped parameter $\theta$ which represents a barometer of clogging phenomenon was made. Moreover, the effect of vibratory grout injection through the joint was also investigated using artificially made rock joints. Experimental results as well as analytical results show that the grout penetration depth can be substantially improved by vibration grouting. Moreover, it was found that enhancement of the permeation grouting due to vibratory injection is more dominant at low grouting pressure of less than 400kPa.

• 한국지반신소재학회논문집
• /
• 제16권2호
• /
• pp.149-158
• /
• 2017

저수지 제방의 그라우팅시 가장 이상적인 주입형태는 침투주입이지만 일반적으로 침투와 할렬주입이 복합적으로 시공되어 원지반의 교란이 발생될 가능성이 존재한다. 이와 같은 문제점을 개선하기 위하여 이상적인 침투주입을 가능하게 하는 그라우트 재료를 이용하여 저압주입과 팽창제를 이용한 주입재의 팽창력으로 그라우팅 주입공 주변에 대한 다짐을 실시하고 순차적으로 그라우트재를 주입하는 방법이 유용하다. 본 연구에서는 그라우트 주입공 주변에 대한 침투다짐효과를 얻기 위하여 하이브리드형 주입재와 팽창제를 혼합한 침투다짐 그라우트를 PC(Permeable Compaction)팩커를 이용하여 주입한 그 효과에 대해 고찰하였다, 본 연구결과, PC팩커와 침투다짐 그라우트를 저수지 보수보강 그라우팅 공사에 적용할 경우 저수지 차수 그라우팅의 성능기준에 부합하는 침투다짐효과가 발휘될 수 있음을 확인하였다.